diff mbox

[2/2] mtd: nand: Fix some function description mismatches in core.c

Message ID 1522228438-64034-3-git-send-email-xiaolei.li@mediatek.com (mailing list archive)
State New, archived
Headers show

Commit Message

xiaolei li March 28, 2018, 9:13 a.m. UTC
In core.c, some function descriptions do not match function
definitions. Just fix these mismatches.

Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com>
---
 drivers/mtd/nand/core.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

Comments

Boris Brezillon March 28, 2018, 11:37 a.m. UTC | #1
On Wed, 28 Mar 2018 17:13:58 +0800
Xiaolei Li <xiaolei.li@mediatek.com> wrote:

> In core.c, some function descriptions do not match function
> definitions. Just fix these mismatches.
> 
> Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com>
> ---
>  drivers/mtd/nand/core.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/mtd/nand/core.c b/drivers/mtd/nand/core.c
> index f237a68..9f6febd 100644
> --- a/drivers/mtd/nand/core.c
> +++ b/drivers/mtd/nand/core.c
> @@ -51,7 +51,7 @@ bool nanddev_isbad(struct nand_device *nand, const struct nand_pos *pos)
>  /**
>   * nanddev_markbad() - Mark a block as bad
>   * @nand: NAND device
> - * @block: block to mark bad
> + * @pos: position of the block to mark bad
>   *
>   * Mark a block bad. This function is updating the BBT if available and
>   * calls the low-level markbad hook (nand->ops->markbad()).
> @@ -117,9 +117,9 @@ bool nanddev_isreserved(struct nand_device *nand, const struct nand_pos *pos)
>  /**
>   * nanddev_erase() - Erase a NAND portion
>   * @nand: NAND device
> - * @block: eraseblock to erase
> + * @pos: position of the block to erase
>   *
> - * Erases @block if it's not bad.
> + * Erases the block if it's not bad.
>   *
>   * Return: 0 in case of success, a negative error code otherwise.
>   */
> @@ -179,11 +179,11 @@ int nanddev_mtd_erase(struct mtd_info *mtd, struct erase_info *einfo)
>  /**
>   * nanddev_init() - Initialize a NAND device
>   * @nand: NAND device
> - * @memorg: NAND memory organization descriptor
>   * @ops: NAND device operations
> + * @owner: MTD module owner

	      ^ NAND device owner.

>   *
> - * Initializes a NAND device object. Consistency checks are done on @memorg and
> - * @ops. Also takes care of initializing the BBT.
> + * Initializes a NAND device object. Consistency checks are done on @ops and
> + * nand memory organization. Also takes care of initializing the BBT.

Don't remember the exact format, but I thing you can use something
@nand->memorg

Anyway, thanks for reporting and fixing those problems in the doc.

>   *
>   * Return: 0 in case of success, a negative error code otherwise.
>   */
xiaolei li March 29, 2018, 1:04 a.m. UTC | #2
On Wed, 2018-03-28 at 13:37 +0200, Boris Brezillon wrote:
> On Wed, 28 Mar 2018 17:13:58 +0800
> Xiaolei Li <xiaolei.li@mediatek.com> wrote:
> 
> > In core.c, some function descriptions do not match function
> > definitions. Just fix these mismatches.
> > 
> > Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com>
> > ---
> >  drivers/mtd/nand/core.c | 12 ++++++------
> >  1 file changed, 6 insertions(+), 6 deletions(-)
> > 
> > diff --git a/drivers/mtd/nand/core.c b/drivers/mtd/nand/core.c
> > index f237a68..9f6febd 100644
> > --- a/drivers/mtd/nand/core.c
> > +++ b/drivers/mtd/nand/core.c
> > @@ -51,7 +51,7 @@ bool nanddev_isbad(struct nand_device *nand, const struct nand_pos *pos)
> >  /**
> >   * nanddev_markbad() - Mark a block as bad
> >   * @nand: NAND device
> > - * @block: block to mark bad
> > + * @pos: position of the block to mark bad
> >   *
> >   * Mark a block bad. This function is updating the BBT if available and
> >   * calls the low-level markbad hook (nand->ops->markbad()).
> > @@ -117,9 +117,9 @@ bool nanddev_isreserved(struct nand_device *nand, const struct nand_pos *pos)
> >  /**
> >   * nanddev_erase() - Erase a NAND portion
> >   * @nand: NAND device
> > - * @block: eraseblock to erase
> > + * @pos: position of the block to erase
> >   *
> > - * Erases @block if it's not bad.
> > + * Erases the block if it's not bad.
> >   *
> >   * Return: 0 in case of success, a negative error code otherwise.
> >   */
> > @@ -179,11 +179,11 @@ int nanddev_mtd_erase(struct mtd_info *mtd, struct erase_info *einfo)
> >  /**
> >   * nanddev_init() - Initialize a NAND device
> >   * @nand: NAND device
> > - * @memorg: NAND memory organization descriptor
> >   * @ops: NAND device operations
> > + * @owner: MTD module owner
> 
> 	      ^ NAND device owner.
OK. Thanks
> 
> >   *
> > - * Initializes a NAND device object. Consistency checks are done on @memorg and
> > - * @ops. Also takes care of initializing the BBT.
> > + * Initializes a NAND device object. Consistency checks are done on @ops and
> > + * nand memory organization. Also takes care of initializing the BBT.
> 
> Don't remember the exact format, but I thing you can use something
> @nand->memorg
OK. Thanks.
> 
> Anyway, thanks for reporting and fixing those problems in the doc.
Welcome.

Thanks.
Xiaolei
> 
> >   *
> >   * Return: 0 in case of success, a negative error code otherwise.
> >   */
> 
> 
>
diff mbox

Patch

diff --git a/drivers/mtd/nand/core.c b/drivers/mtd/nand/core.c
index f237a68..9f6febd 100644
--- a/drivers/mtd/nand/core.c
+++ b/drivers/mtd/nand/core.c
@@ -51,7 +51,7 @@  bool nanddev_isbad(struct nand_device *nand, const struct nand_pos *pos)
 /**
  * nanddev_markbad() - Mark a block as bad
  * @nand: NAND device
- * @block: block to mark bad
+ * @pos: position of the block to mark bad
  *
  * Mark a block bad. This function is updating the BBT if available and
  * calls the low-level markbad hook (nand->ops->markbad()).
@@ -117,9 +117,9 @@  bool nanddev_isreserved(struct nand_device *nand, const struct nand_pos *pos)
 /**
  * nanddev_erase() - Erase a NAND portion
  * @nand: NAND device
- * @block: eraseblock to erase
+ * @pos: position of the block to erase
  *
- * Erases @block if it's not bad.
+ * Erases the block if it's not bad.
  *
  * Return: 0 in case of success, a negative error code otherwise.
  */
@@ -179,11 +179,11 @@  int nanddev_mtd_erase(struct mtd_info *mtd, struct erase_info *einfo)
 /**
  * nanddev_init() - Initialize a NAND device
  * @nand: NAND device
- * @memorg: NAND memory organization descriptor
  * @ops: NAND device operations
+ * @owner: MTD module owner
  *
- * Initializes a NAND device object. Consistency checks are done on @memorg and
- * @ops. Also takes care of initializing the BBT.
+ * Initializes a NAND device object. Consistency checks are done on @ops and
+ * nand memory organization. Also takes care of initializing the BBT.
  *
  * Return: 0 in case of success, a negative error code otherwise.
  */