diff mbox series

[v5,8/9] PCI: mediatek: Save the GIC IRQ in mtk_pcie_port

Message ID 1538129080-8206-9-git-send-email-honghui.zhang@mediatek.com (mailing list archive)
State New, archived
Headers show
Series PCI: mediatek: fixup find_port, enable_msi and add pm, module support | expand

Commit Message

Honghui Zhang Sept. 28, 2018, 10:04 a.m. UTC
From: Honghui Zhang <honghui.zhang@mediatek.com>

Need to save the PCIe's GIC IRQ for dispose_irq, this is a prepare
patch for add mediatek PCIe module support to tear down the IRQ, no
functional changed.

Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
---
 drivers/pci/controller/pcie-mediatek.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c
index bd1bde3..d35890c 100644
--- a/drivers/pci/controller/pcie-mediatek.c
+++ b/drivers/pci/controller/pcie-mediatek.c
@@ -162,6 +162,7 @@  struct mtk_pcie_soc {
  * @phy: pointer to PHY control block
  * @lane: lane count
  * @slot: port slot
+ * @irq: GIC irq
  * @irq_domain: legacy INTx IRQ domain
  * @inner_domain: inner IRQ domain
  * @msi_domain: MSI IRQ domain
@@ -182,6 +183,7 @@  struct mtk_pcie_port {
 	struct phy *phy;
 	u32 lane;
 	u32 slot;
+	int irq;
 	struct irq_domain *irq_domain;
 	struct irq_domain *inner_domain;
 	struct irq_domain *msi_domain;
@@ -624,7 +626,7 @@  static int mtk_pcie_setup_irq(struct mtk_pcie_port *port,
 	struct mtk_pcie *pcie = port->pcie;
 	struct device *dev = pcie->dev;
 	struct platform_device *pdev = to_platform_device(dev);
-	int err, irq;
+	int err;
 
 	err = mtk_pcie_init_irq_domain(port, node);
 	if (err) {
@@ -632,8 +634,9 @@  static int mtk_pcie_setup_irq(struct mtk_pcie_port *port,
 		return err;
 	}
 
-	irq = platform_get_irq(pdev, port->slot);
-	irq_set_chained_handler_and_data(irq, mtk_pcie_intr_handler, port);
+	port->irq = platform_get_irq(pdev, port->slot);
+	irq_set_chained_handler_and_data(port->irq,
+					 mtk_pcie_intr_handler, port);
 
 	return 0;
 }