| Message ID | 1556614265-12745-9-git-send-email-henryc.chen@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [RFC,V2,01/11] dt-bindings: soc: Add dvfsrc driver bindings | expand |
On Tue, Apr 30, 2019 at 04:51:02PM +0800, Henry Chen wrote: > Add interconnect provider dt-bindings for MT8183. > > Signed-off-by: Henry Chen <henryc.chen@mediatek.com> > --- > .../bindings/interconnect/mtk,mt8183.txt | 24 ++++++++++++++++++++++ > 1 file changed, 24 insertions(+) > create mode 100644 Documentation/devicetree/bindings/interconnect/mtk,mt8183.txt > > diff --git a/Documentation/devicetree/bindings/interconnect/mtk,mt8183.txt b/Documentation/devicetree/bindings/interconnect/mtk,mt8183.txt > new file mode 100644 > index 0000000..1cf1841 > --- /dev/null > +++ b/Documentation/devicetree/bindings/interconnect/mtk,mt8183.txt > @@ -0,0 +1,24 @@ > +Mediatek MT8183 interconnect binding This should be part of the dvfsrc binding. > + > +MT8183 interconnect providers support dram bandwidth requirements. The provider > +is able to communicate with the DVFSRC and send the dram bandwidth to it. > +Provider nodes must reside within an DVFSRC device node. > + > +Required properties : > +- compatible : shall contain only one of the following: > + "mediatek,mt8183-emi-icc" > +- #interconnect-cells : should contain 1 > + > +Examples: > + > +dvfsrc@10012000 { > + compatible = "mediatek,mt8183-dvfsrc"; > + reg = <0 0x10012000 0 0x1000>; > + clocks = <&infracfg CLK_INFRA_DVFSRC>; > + clock-names = "dvfsrc"; > + ddr_emi: interconnect { > + compatible = "mediatek,mt8183-emi-icc"; > + #interconnect-cells = <1>; No need for a child node here. Just move #interconnect-cells to the parent. Rob
Hi Rob, Sorry for late reply. On Wed, 2019-05-01 at 15:27 -0500, Rob Herring wrote: > On Tue, Apr 30, 2019 at 04:51:02PM +0800, Henry Chen wrote: > > Add interconnect provider dt-bindings for MT8183. > > > > Signed-off-by: Henry Chen <henryc.chen@mediatek.com> > > --- > > .../bindings/interconnect/mtk,mt8183.txt | 24 ++++++++++++++++++++++ > > 1 file changed, 24 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/interconnect/mtk,mt8183.txt > > > > diff --git a/Documentation/devicetree/bindings/interconnect/mtk,mt8183.txt b/Documentation/devicetree/bindings/interconnect/mtk,mt8183.txt > > new file mode 100644 > > index 0000000..1cf1841 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/interconnect/mtk,mt8183.txt > > @@ -0,0 +1,24 @@ > > +Mediatek MT8183 interconnect binding > > This should be part of the dvfsrc binding. ok, will add these into dvfsrc binding. > > > + > > +MT8183 interconnect providers support dram bandwidth requirements. The provider > > +is able to communicate with the DVFSRC and send the dram bandwidth to it. > > +Provider nodes must reside within an DVFSRC device node. > > + > > +Required properties : > > +- compatible : shall contain only one of the following: > > + "mediatek,mt8183-emi-icc" > > +- #interconnect-cells : should contain 1 > > + > > +Examples: > > + > > +dvfsrc@10012000 { > > + compatible = "mediatek,mt8183-dvfsrc"; > > + reg = <0 0x10012000 0 0x1000>; > > + clocks = <&infracfg CLK_INFRA_DVFSRC>; > > + clock-names = "dvfsrc"; > > + ddr_emi: interconnect { > > + compatible = "mediatek,mt8183-emi-icc"; > > + #interconnect-cells = <1>; > > No need for a child node here. Just move #interconnect-cells to the > parent. Ihave tried and it cannot work if move "#interconnect-cells" to the parent. The provider nodes must reside within an DVFSRC device node. > > Rob
diff --git a/Documentation/devicetree/bindings/interconnect/mtk,mt8183.txt b/Documentation/devicetree/bindings/interconnect/mtk,mt8183.txt new file mode 100644 index 0000000..1cf1841 --- /dev/null +++ b/Documentation/devicetree/bindings/interconnect/mtk,mt8183.txt @@ -0,0 +1,24 @@ +Mediatek MT8183 interconnect binding + +MT8183 interconnect providers support dram bandwidth requirements. The provider +is able to communicate with the DVFSRC and send the dram bandwidth to it. +Provider nodes must reside within an DVFSRC device node. + +Required properties : +- compatible : shall contain only one of the following: + "mediatek,mt8183-emi-icc" +- #interconnect-cells : should contain 1 + +Examples: + +dvfsrc@10012000 { + compatible = "mediatek,mt8183-dvfsrc"; + reg = <0 0x10012000 0 0x1000>; + clocks = <&infracfg CLK_INFRA_DVFSRC>; + clock-names = "dvfsrc"; + ddr_emi: interconnect { + compatible = "mediatek,mt8183-emi-icc"; + #interconnect-cells = <1>; + }; +}; +
Add interconnect provider dt-bindings for MT8183. Signed-off-by: Henry Chen <henryc.chen@mediatek.com> --- .../bindings/interconnect/mtk,mt8183.txt | 24 ++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 Documentation/devicetree/bindings/interconnect/mtk,mt8183.txt