diff mbox series

[v3,8/10] pwm: mediatek: add new property and fix mt7628 pwm

Message ID 1565940088-845-9-git-send-email-sam.shih@mediatek.com (mailing list archive)
State New, archived
Headers show
Series Add mt7629 and fix mt7628 pwm | expand

Commit Message

Sam Shih (史碩三) Aug. 16, 2019, 7:21 a.m. UTC
From: sam shih <sam.shih@mediatek.com>

This fix mt7628 pwm during configure from userspace. The SoC
is legacy MIPS and has no complex clock tree. This patch add property
clock-frequency to the SoC specific data and legacy MIPS SoC need to
configure it in DT. This property is use for period calculation.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
 drivers/pwm/pwm-mediatek.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/pwm/pwm-mediatek.c b/drivers/pwm/pwm-mediatek.c
index d696df7a58fa..922a7543a2b1 100644
--- a/drivers/pwm/pwm-mediatek.c
+++ b/drivers/pwm/pwm-mediatek.c
@@ -53,6 +53,7 @@  struct pwm_mediatek_chip {
 	struct clk *clk_top;
 	struct clk *clk_main;
 	struct clk **clk_pwms;
+	unsigned int clk_freq;
 	const struct pwm_mediatek_of_data *soc;
 };
 
@@ -139,7 +140,10 @@  static int pwm_mediatek_config(struct pwm_chip *chip, struct pwm_device *pwm,
 
 	/* Using resolution in picosecond gets accuracy higher */
 	resolution = (u64)NSEC_PER_SEC * 1000;
-	do_div(resolution, clk_get_rate(clk));
+	if (pc->soc->has_clks)
+		do_div(resolution, clk_get_rate(clk));
+	else
+		do_div(resolution, pc->clk_freq);
 
 	cnt_period = DIV_ROUND_CLOSEST_ULL((u64)period_ns * 1000, resolution);
 	while (cnt_period > 8191) {
@@ -216,6 +220,7 @@  static int pwm_mediatek_probe(struct platform_device *pdev)
 	struct pwm_mediatek_chip *pc;
 	struct resource *res;
 	unsigned int npwms;
+	unsigned int clk_freq;
 	int ret;
 
 	pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
@@ -265,6 +270,14 @@  static int pwm_mediatek_probe(struct platform_device *pdev)
 			if (IS_ERR(pc->clk_pwms[i]))
 				return PTR_ERR(pc->clk_pwms[i]);
 		}
+	} else {
+		ret = of_property_read_u32(np, "clock-frequency",
+						&clk_freq);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "failed to get clk_freq\n");
+			return ret;
+		}
+		pc->clk_freq = clk_freq;
 	}
 
 	platform_set_drvdata(pdev, pc);