diff mbox series

[v2,2/2] memory: mtk-smi: Add bandwidth initial golden setting for MT6779

Message ID 1575872371-671-4-git-send-email-ming-fan.chen@mediatek.com (mailing list archive)
State New, archived
Headers show
Series [v2,1/2] dt-bindings: mediatek: Add binding for MT6779 SMI | expand

Commit Message

Ming-Fan Chen Dec. 9, 2019, 6:19 a.m. UTC
SMI bandwidth initial golden setting for MT6779 make sure
better performance of memory control for multimedia modules.

Signed-off-by: Ming-Fan Chen <ming-fan.chen@mediatek.com>
---
 drivers/memory/mtk-smi.c |  143 +++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 142 insertions(+), 1 deletion(-)

Comments

Yong Wu (吴勇) Dec. 27, 2019, 7:21 a.m. UTC | #1
On Mon, 2019-12-09 at 14:19 +0800, Ming-Fan Chen wrote:
> SMI bandwidth initial golden setting for MT6779 make sure
> better performance of memory control for multimedia modules.
> 
> Signed-off-by: Ming-Fan Chen <ming-fan.chen@mediatek.com>
> ---
>  drivers/memory/mtk-smi.c |  143 +++++++++++++++++++++++++++++++++++++++++++++-
>  1 file changed, 142 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
> index 439d7d8..6b18b71 100644
> --- a/drivers/memory/mtk-smi.c
> +++ b/drivers/memory/mtk-smi.c
> @@ -41,21 +41,49 @@
>  #define SMI_LARB_NONSEC_CON(id)	(0x380 + ((id) * 4))
>  #define F_MMU_EN		BIT(0)
>  
> +#define SMI_LARB_CMD_THRT_CON	 0x24
> +#define SMI_LARB_SW_FLAG	 0x40
> +#define SMI_LARB_OSTDL_PORT	 0x200
> +#define SMI_LARB_OSTDL_PORTx(id) (SMI_LARB_OSTDL_PORT + (((id) & 0x1f) << 2))
> +
>  /* SMI COMMON */
> +#define SMI_L1LEN			0x100
> +#define SMI_L1ARB0			0x104
> +#define SMI_L1ARB(id)			(SMI_L1ARB0 + (((id) & 0x7) << 2))
> +
>  #define SMI_BUS_SEL			0x220
>  #define SMI_BUS_LARB_SHIFT(larbid)	((larbid) << 1)
>  /* All are MMU0 defaultly. Only specialize mmu1 here. */
>  #define F_MMU1_LARB(larbid)		(0x1 << SMI_BUS_LARB_SHIFT(larbid))
>  
> +#define SMI_M4U_TH			0x234
> +#define SMI_FIFO_TH1			0x238
> +#define SMI_FIFO_TH2			0x23c
> +#define SMI_DCM				0x300
> +#define SMI_DUMMY			0x444
> +
> +#define SMI_LARB_PORT_NR_MAX		32
> +#define SMI_LARB_MISC_NR		2
> +#define SMI_COMMON_MISC_NR		6
> +
>  enum mtk_smi_gen {
>  	MTK_SMI_GEN1,
>  	MTK_SMI_GEN2
>  };
>  
> +struct mtk_smi_reg_pair {
> +	u16	offset;
> +	u32	value;
> +};
> +
>  struct mtk_smi_common_plat {
>  	enum mtk_smi_gen gen;
>  	bool             has_gals;
>  	u32              bus_sel; /* Balance some larbs to enter mmu0 or mmu1 */
> +	bool                          has_bwc;
> +	u8                            larb_nr;
> +	const u16                     *l1arb;
> +	const struct mtk_smi_reg_pair *misc;
>  };
>  
>  struct mtk_smi_larb_gen {
> @@ -63,6 +91,9 @@ struct mtk_smi_larb_gen {
>  	void (*config_port)(struct device *);
>  	unsigned int			larb_direct_to_common_mask;
>  	bool				has_gals;
> +	bool				has_bwc;
> +	const u8			(*ostdl)[SMI_LARB_PORT_NR_MAX];
> +	const struct mtk_smi_reg_pair	(*misc)[SMI_LARB_MISC_NR];
>  };
>  
>  struct mtk_smi {
> @@ -161,6 +192,8 @@ static void mtk_smi_larb_config_port_gen2_general(struct device *dev)
>  	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
>  	u32 reg;
>  	int i;
> +	const u8 *ostdl;
> +	const struct mtk_smi_reg_pair *misc;

Normally define the local variables from long to short.

That means:
+	const struct mtk_smi_reg_pair *misc;
+	const u8 *ostdl;
        u32 reg;
        int i;

>  
>  	if (BIT(larb->larbid) & larb->larb_gen->larb_direct_to_common_mask)
>  		return;
> @@ -170,6 +203,20 @@ static void mtk_smi_larb_config_port_gen2_general(struct device *dev)
>  		reg |= F_MMU_EN;
>  		writel(reg, larb->base + SMI_LARB_NONSEC_CON(i));
>  	}
> +
> +	if (!larb->larb_gen->has_bwc)
> +		return;
> +
> +	for (i = 0, ostdl = larb->larb_gen->ostdl[larb->larbid];
> +		i < SMI_LARB_PORT_NR_MAX; i++)
> +		writel_relaxed(ostdl[i],
> +			       larb->base + SMI_LARB_OSTDL_PORTx(i));

the writel_relaxed can be done in one line, it isn't over 80.


ostdl = larb->larb_gen->ostdl[larb->larbid];
for (i = 0; i < SMI_LARB_PORT_NR_MAX; i++)
	writel_relaxed(ostdl[i], larb->base + SMI_LARB_OSTDL_PORTx(i));

> +
> +	for (i = 0, misc = larb->larb_gen->misc[larb->larbid];
> +		i < SMI_LARB_MISC_NR; i++)
> +		writel_relaxed(misc[i].value,
> +			       larb->base + misc[i].offset);

ditto. it also don't over 80 chars.

misc = larb->larb_gen->misc[larb->larbid];
for (i = 0; i < SMI_LARB_MISC_NR; i++)
	writel_relaxed(misc[i].value, larb->base + misc[i].offset);

> +	wmb(); /* make sure settings are written */
>  }
>  
>  static void mtk_smi_larb_config_port_mt8173(struct device *dev)
> @@ -239,6 +286,55 @@ static void mtk_smi_larb_config_port_gen1(struct device *dev)
>  	.larb_direct_to_common_mask = BIT(8) | BIT(9),      /* bdpsys */
>  };
>  
> +static const u8 mtk_smi_larb_mt6779_ostdl[][SMI_LARB_PORT_NR_MAX] = {
> +	{0x28, 0x28, 0x01, 0x28, 0x01, 0x01, 0x0a, 0x0a, 0x28,},
> +	{0x28, 0x01, 0x28, 0x28, 0x0a, 0x01, 0x01, 0x0d, 0x0d, 0x07,
> +	 0x01, 0x07, 0x01, 0x28,},
> +	{0x18, 0x01, 0x08, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02,
> +	 0x01, 0x01},
> +	{0x01, 0x03, 0x02, 0x01, 0x01, 0x01, 0x01, 0x04, 0x02, 0x01,
> +	 0x04, 0x01, 0x01, 0x01, 0x01, 0x04, 0x0b, 0x13, 0x14,},
> +	{},
> +	{0x13, 0x0f, 0x0d, 0x07, 0x07, 0x04, 0x03, 0x01, 0x03, 0x01,
> +	 0x05, 0x0c, 0x01, 0x01, 0x08, 0x06, 0x02, 0x01, 0x08, 0x08,
> +	 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,},
> +	{0x01, 0x01, 0x01,},
> +	{0x01, 0x01, 0x01, 0x01,},
> +	{0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,},
> +	{0x1f, 0x1a, 0x02, 0x04, 0x1f, 0x02, 0x14, 0x01, 0x1f, 0x04,
> +	 0x04, 0x01, 0x01, 0x01, 0x02, 0x02, 0x04, 0x02, 0x01, 0x02,
> +	 0x04, 0x02, 0x02, 0x01,},
> +	{0x1f, 0x1a, 0x02, 0x04, 0x1f, 0x02, 0x14, 0x01, 0x1f, 0x1a,
> +	 0x02, 0x04, 0x1f, 0x02, 0x14, 0x01, 0x01, 0x02, 0x02, 0x04,
> +	 0x02, 0x0a, 0x02, 0x02, 0x04, 0x02, 0x0a, 0x02, 0x04, 0x02, 0x04,},
> +	{0x01, 0x01, 0x01, 0x01, 0x01,},
> +};
> +
> +static const struct mtk_smi_reg_pair
> +mtk_smi_larb_mt6779_misc[][SMI_LARB_MISC_NR] = {
> +	{{SMI_LARB_CMD_THRT_CON, 0x370256}, {SMI_LARB_SW_FLAG, 0x1},},

I am confused why we need SMI_LARB_SW_FLAG. Does it only indicate that
the setting is not the default one?. I guess we also get it from the
other regsiter, like SMI_LARB_CMD_THRT_CON.

> +	{{SMI_LARB_CMD_THRT_CON, 0x300256}, {SMI_LARB_SW_FLAG, 0x1},},
> +	{{SMI_LARB_CMD_THRT_CON, 0x370256}, {SMI_LARB_SW_FLAG, 0x1},},
> +	{},
> +	{{SMI_LARB_CMD_THRT_CON, 0x300256}, {SMI_LARB_SW_FLAG, 0x1},},
> +	{{SMI_LARB_CMD_THRT_CON, 0x300256}, {SMI_LARB_SW_FLAG, 0x1},},
> +	{{SMI_LARB_CMD_THRT_CON, 0x300256}, {SMI_LARB_SW_FLAG, 0x1},},
> +	{{SMI_LARB_CMD_THRT_CON, 0x300256}, {SMI_LARB_SW_FLAG, 0x1},},
> +	{{SMI_LARB_CMD_THRT_CON, 0x370256}, {SMI_LARB_SW_FLAG, 0x1},},
> +	{{SMI_LARB_CMD_THRT_CON, 0x370256}, {SMI_LARB_SW_FLAG, 0x1},},
> +	{{SMI_LARB_CMD_THRT_CON, 0x370256}, {SMI_LARB_SW_FLAG, 0x1},},
> +};
> +
> +static const struct mtk_smi_larb_gen mtk_smi_larb_mt6779 = {
> +	.config_port  = mtk_smi_larb_config_port_gen2_general,
> +	.larb_direct_to_common_mask =
> +		BIT(4) | BIT(6) | BIT(11) | BIT(12) | BIT(13),
> +		/* DUMMY | IPU0 | IPU1 | CCU | MDLA */
> +	.has_bwc = true,

Does the larb also have has_gals?

> +	.ostdl   = mtk_smi_larb_mt6779_ostdl,
> +	.misc    = mtk_smi_larb_mt6779_misc,
> +};
> +
>  static const struct mtk_smi_larb_gen mtk_smi_larb_mt8183 = {
>  	.has_gals                   = true,
>  	.config_port                = mtk_smi_larb_config_port_gen2_general,
> @@ -260,6 +356,10 @@ static void mtk_smi_larb_config_port_gen1(struct device *dev)
>  		.data = &mtk_smi_larb_mt2712
>  	},
>  	{
> +		.compatible = "mediatek,mt6779-smi-larb",
> +		.data = &mtk_smi_larb_mt6779
> +	},
> +	{
>  		.compatible = "mediatek,mt8183-smi-larb",
>  		.data = &mtk_smi_larb_mt8183
>  	},
> @@ -386,6 +486,31 @@ static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
>  	.gen = MTK_SMI_GEN2,
>  };
>  
> +static const u16 mtk_smi_common_mt6779_l1arb[] = {
> +	0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000,
> +};
> +
> +static const struct
> +mtk_smi_reg_pair mtk_smi_common_mt6779_misc[SMI_COMMON_MISC_NR] = {
> +	{SMI_L1LEN, 0xb},
> +	{SMI_M4U_TH, 0xe100e10},
> +	{SMI_FIFO_TH1, 0x506090a},
> +	{SMI_FIFO_TH2, 0x506090a},
> +	{SMI_DCM, 0x4f1},
> +	{SMI_DUMMY, 0x1},
> +};
> +
> +static const struct mtk_smi_common_plat mtk_smi_common_mt6779 = {
> +	.gen		= MTK_SMI_GEN2,
> +	.has_gals	= true,
> +	.bus_sel	= F_MMU1_LARB(1) | F_MMU1_LARB(2) | F_MMU1_LARB(4) |
> +			  F_MMU1_LARB(5) | F_MMU1_LARB(6) | F_MMU1_LARB(7),
> +	.has_bwc	= true,
> +	.larb_nr	= ARRAY_SIZE(mtk_smi_common_mt6779_l1arb),
> +	.l1arb		= mtk_smi_common_mt6779_l1arb,
> +	.misc		= mtk_smi_common_mt6779_misc,

How about add a new one?:
misc_nr = ARRAY_SIZE(mtk_smi_common_mt6779_misc);

Because we should move the "bus_sel" into this misc structure later,
right?

> +};
> +
>  static const struct mtk_smi_common_plat mtk_smi_common_mt8183 = {
>  	.gen      = MTK_SMI_GEN2,
>  	.has_gals = true,
> @@ -407,6 +532,10 @@ static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
>  		.data = &mtk_smi_common_gen2,
>  	},
>  	{
> +		.compatible = "mediatek,mt6779-smi-common",
> +		.data = &mtk_smi_common_mt6779,
> +	},
> +	{
>  		.compatible = "mediatek,mt8183-smi-common",
>  		.data = &mtk_smi_common_mt8183,
>  	},
> @@ -484,7 +613,7 @@ static int __maybe_unused mtk_smi_common_resume(struct device *dev)
>  {
>  	struct mtk_smi *common = dev_get_drvdata(dev);
>  	u32 bus_sel = common->plat->bus_sel;
> -	int ret;
> +	int i, ret;
>  
>  	ret = mtk_smi_clk_enable(common);
>  	if (ret) {
> @@ -494,6 +623,18 @@ static int __maybe_unused mtk_smi_common_resume(struct device *dev)
>  
>  	if (common->plat->gen == MTK_SMI_GEN2 && bus_sel)
>  		writel(bus_sel, common->base + SMI_BUS_SEL);
> +
> +	if (!common->plat->has_bwc)
> +		return 0;
> +
> +	for (i = 0; i < common->plat->larb_nr; i++)
> +		writel_relaxed(common->plat->l1arb[i],
> +			       common->base + SMI_L1ARB(i));
> +
> +	for (i = 0; i < SMI_COMMON_MISC_NR; i++)
> +		writel_relaxed(common->plat->misc[i].value,
> +			       common->base + common->plat->misc[i].value);
> +	wmb(); /* make sure settings are written */
>  	return 0;
>  }

In the end, As the comment in v1, this patch should split:

a. add basic mt6779 smi-larb support(only add nodes and config_port like
the previous SoC.)

b. add bandwidth initial settting for mt6779.

c. Move the bus_sel into the smi-common misc setting.

>
diff mbox series

Patch

diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
index 439d7d8..6b18b71 100644
--- a/drivers/memory/mtk-smi.c
+++ b/drivers/memory/mtk-smi.c
@@ -41,21 +41,49 @@ 
 #define SMI_LARB_NONSEC_CON(id)	(0x380 + ((id) * 4))
 #define F_MMU_EN		BIT(0)
 
+#define SMI_LARB_CMD_THRT_CON	 0x24
+#define SMI_LARB_SW_FLAG	 0x40
+#define SMI_LARB_OSTDL_PORT	 0x200
+#define SMI_LARB_OSTDL_PORTx(id) (SMI_LARB_OSTDL_PORT + (((id) & 0x1f) << 2))
+
 /* SMI COMMON */
+#define SMI_L1LEN			0x100
+#define SMI_L1ARB0			0x104
+#define SMI_L1ARB(id)			(SMI_L1ARB0 + (((id) & 0x7) << 2))
+
 #define SMI_BUS_SEL			0x220
 #define SMI_BUS_LARB_SHIFT(larbid)	((larbid) << 1)
 /* All are MMU0 defaultly. Only specialize mmu1 here. */
 #define F_MMU1_LARB(larbid)		(0x1 << SMI_BUS_LARB_SHIFT(larbid))
 
+#define SMI_M4U_TH			0x234
+#define SMI_FIFO_TH1			0x238
+#define SMI_FIFO_TH2			0x23c
+#define SMI_DCM				0x300
+#define SMI_DUMMY			0x444
+
+#define SMI_LARB_PORT_NR_MAX		32
+#define SMI_LARB_MISC_NR		2
+#define SMI_COMMON_MISC_NR		6
+
 enum mtk_smi_gen {
 	MTK_SMI_GEN1,
 	MTK_SMI_GEN2
 };
 
+struct mtk_smi_reg_pair {
+	u16	offset;
+	u32	value;
+};
+
 struct mtk_smi_common_plat {
 	enum mtk_smi_gen gen;
 	bool             has_gals;
 	u32              bus_sel; /* Balance some larbs to enter mmu0 or mmu1 */
+	bool                          has_bwc;
+	u8                            larb_nr;
+	const u16                     *l1arb;
+	const struct mtk_smi_reg_pair *misc;
 };
 
 struct mtk_smi_larb_gen {
@@ -63,6 +91,9 @@  struct mtk_smi_larb_gen {
 	void (*config_port)(struct device *);
 	unsigned int			larb_direct_to_common_mask;
 	bool				has_gals;
+	bool				has_bwc;
+	const u8			(*ostdl)[SMI_LARB_PORT_NR_MAX];
+	const struct mtk_smi_reg_pair	(*misc)[SMI_LARB_MISC_NR];
 };
 
 struct mtk_smi {
@@ -161,6 +192,8 @@  static void mtk_smi_larb_config_port_gen2_general(struct device *dev)
 	struct mtk_smi_larb *larb = dev_get_drvdata(dev);
 	u32 reg;
 	int i;
+	const u8 *ostdl;
+	const struct mtk_smi_reg_pair *misc;
 
 	if (BIT(larb->larbid) & larb->larb_gen->larb_direct_to_common_mask)
 		return;
@@ -170,6 +203,20 @@  static void mtk_smi_larb_config_port_gen2_general(struct device *dev)
 		reg |= F_MMU_EN;
 		writel(reg, larb->base + SMI_LARB_NONSEC_CON(i));
 	}
+
+	if (!larb->larb_gen->has_bwc)
+		return;
+
+	for (i = 0, ostdl = larb->larb_gen->ostdl[larb->larbid];
+		i < SMI_LARB_PORT_NR_MAX; i++)
+		writel_relaxed(ostdl[i],
+			       larb->base + SMI_LARB_OSTDL_PORTx(i));
+
+	for (i = 0, misc = larb->larb_gen->misc[larb->larbid];
+		i < SMI_LARB_MISC_NR; i++)
+		writel_relaxed(misc[i].value,
+			       larb->base + misc[i].offset);
+	wmb(); /* make sure settings are written */
 }
 
 static void mtk_smi_larb_config_port_mt8173(struct device *dev)
@@ -239,6 +286,55 @@  static void mtk_smi_larb_config_port_gen1(struct device *dev)
 	.larb_direct_to_common_mask = BIT(8) | BIT(9),      /* bdpsys */
 };
 
+static const u8 mtk_smi_larb_mt6779_ostdl[][SMI_LARB_PORT_NR_MAX] = {
+	{0x28, 0x28, 0x01, 0x28, 0x01, 0x01, 0x0a, 0x0a, 0x28,},
+	{0x28, 0x01, 0x28, 0x28, 0x0a, 0x01, 0x01, 0x0d, 0x0d, 0x07,
+	 0x01, 0x07, 0x01, 0x28,},
+	{0x18, 0x01, 0x08, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02,
+	 0x01, 0x01},
+	{0x01, 0x03, 0x02, 0x01, 0x01, 0x01, 0x01, 0x04, 0x02, 0x01,
+	 0x04, 0x01, 0x01, 0x01, 0x01, 0x04, 0x0b, 0x13, 0x14,},
+	{},
+	{0x13, 0x0f, 0x0d, 0x07, 0x07, 0x04, 0x03, 0x01, 0x03, 0x01,
+	 0x05, 0x0c, 0x01, 0x01, 0x08, 0x06, 0x02, 0x01, 0x08, 0x08,
+	 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,},
+	{0x01, 0x01, 0x01,},
+	{0x01, 0x01, 0x01, 0x01,},
+	{0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,},
+	{0x1f, 0x1a, 0x02, 0x04, 0x1f, 0x02, 0x14, 0x01, 0x1f, 0x04,
+	 0x04, 0x01, 0x01, 0x01, 0x02, 0x02, 0x04, 0x02, 0x01, 0x02,
+	 0x04, 0x02, 0x02, 0x01,},
+	{0x1f, 0x1a, 0x02, 0x04, 0x1f, 0x02, 0x14, 0x01, 0x1f, 0x1a,
+	 0x02, 0x04, 0x1f, 0x02, 0x14, 0x01, 0x01, 0x02, 0x02, 0x04,
+	 0x02, 0x0a, 0x02, 0x02, 0x04, 0x02, 0x0a, 0x02, 0x04, 0x02, 0x04,},
+	{0x01, 0x01, 0x01, 0x01, 0x01,},
+};
+
+static const struct mtk_smi_reg_pair
+mtk_smi_larb_mt6779_misc[][SMI_LARB_MISC_NR] = {
+	{{SMI_LARB_CMD_THRT_CON, 0x370256}, {SMI_LARB_SW_FLAG, 0x1},},
+	{{SMI_LARB_CMD_THRT_CON, 0x300256}, {SMI_LARB_SW_FLAG, 0x1},},
+	{{SMI_LARB_CMD_THRT_CON, 0x370256}, {SMI_LARB_SW_FLAG, 0x1},},
+	{},
+	{{SMI_LARB_CMD_THRT_CON, 0x300256}, {SMI_LARB_SW_FLAG, 0x1},},
+	{{SMI_LARB_CMD_THRT_CON, 0x300256}, {SMI_LARB_SW_FLAG, 0x1},},
+	{{SMI_LARB_CMD_THRT_CON, 0x300256}, {SMI_LARB_SW_FLAG, 0x1},},
+	{{SMI_LARB_CMD_THRT_CON, 0x300256}, {SMI_LARB_SW_FLAG, 0x1},},
+	{{SMI_LARB_CMD_THRT_CON, 0x370256}, {SMI_LARB_SW_FLAG, 0x1},},
+	{{SMI_LARB_CMD_THRT_CON, 0x370256}, {SMI_LARB_SW_FLAG, 0x1},},
+	{{SMI_LARB_CMD_THRT_CON, 0x370256}, {SMI_LARB_SW_FLAG, 0x1},},
+};
+
+static const struct mtk_smi_larb_gen mtk_smi_larb_mt6779 = {
+	.config_port  = mtk_smi_larb_config_port_gen2_general,
+	.larb_direct_to_common_mask =
+		BIT(4) | BIT(6) | BIT(11) | BIT(12) | BIT(13),
+		/* DUMMY | IPU0 | IPU1 | CCU | MDLA */
+	.has_bwc = true,
+	.ostdl   = mtk_smi_larb_mt6779_ostdl,
+	.misc    = mtk_smi_larb_mt6779_misc,
+};
+
 static const struct mtk_smi_larb_gen mtk_smi_larb_mt8183 = {
 	.has_gals                   = true,
 	.config_port                = mtk_smi_larb_config_port_gen2_general,
@@ -260,6 +356,10 @@  static void mtk_smi_larb_config_port_gen1(struct device *dev)
 		.data = &mtk_smi_larb_mt2712
 	},
 	{
+		.compatible = "mediatek,mt6779-smi-larb",
+		.data = &mtk_smi_larb_mt6779
+	},
+	{
 		.compatible = "mediatek,mt8183-smi-larb",
 		.data = &mtk_smi_larb_mt8183
 	},
@@ -386,6 +486,31 @@  static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
 	.gen = MTK_SMI_GEN2,
 };
 
+static const u16 mtk_smi_common_mt6779_l1arb[] = {
+	0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000, 0x1000,
+};
+
+static const struct
+mtk_smi_reg_pair mtk_smi_common_mt6779_misc[SMI_COMMON_MISC_NR] = {
+	{SMI_L1LEN, 0xb},
+	{SMI_M4U_TH, 0xe100e10},
+	{SMI_FIFO_TH1, 0x506090a},
+	{SMI_FIFO_TH2, 0x506090a},
+	{SMI_DCM, 0x4f1},
+	{SMI_DUMMY, 0x1},
+};
+
+static const struct mtk_smi_common_plat mtk_smi_common_mt6779 = {
+	.gen		= MTK_SMI_GEN2,
+	.has_gals	= true,
+	.bus_sel	= F_MMU1_LARB(1) | F_MMU1_LARB(2) | F_MMU1_LARB(4) |
+			  F_MMU1_LARB(5) | F_MMU1_LARB(6) | F_MMU1_LARB(7),
+	.has_bwc	= true,
+	.larb_nr	= ARRAY_SIZE(mtk_smi_common_mt6779_l1arb),
+	.l1arb		= mtk_smi_common_mt6779_l1arb,
+	.misc		= mtk_smi_common_mt6779_misc,
+};
+
 static const struct mtk_smi_common_plat mtk_smi_common_mt8183 = {
 	.gen      = MTK_SMI_GEN2,
 	.has_gals = true,
@@ -407,6 +532,10 @@  static int __maybe_unused mtk_smi_larb_suspend(struct device *dev)
 		.data = &mtk_smi_common_gen2,
 	},
 	{
+		.compatible = "mediatek,mt6779-smi-common",
+		.data = &mtk_smi_common_mt6779,
+	},
+	{
 		.compatible = "mediatek,mt8183-smi-common",
 		.data = &mtk_smi_common_mt8183,
 	},
@@ -484,7 +613,7 @@  static int __maybe_unused mtk_smi_common_resume(struct device *dev)
 {
 	struct mtk_smi *common = dev_get_drvdata(dev);
 	u32 bus_sel = common->plat->bus_sel;
-	int ret;
+	int i, ret;
 
 	ret = mtk_smi_clk_enable(common);
 	if (ret) {
@@ -494,6 +623,18 @@  static int __maybe_unused mtk_smi_common_resume(struct device *dev)
 
 	if (common->plat->gen == MTK_SMI_GEN2 && bus_sel)
 		writel(bus_sel, common->base + SMI_BUS_SEL);
+
+	if (!common->plat->has_bwc)
+		return 0;
+
+	for (i = 0; i < common->plat->larb_nr; i++)
+		writel_relaxed(common->plat->l1arb[i],
+			       common->base + SMI_L1ARB(i));
+
+	for (i = 0; i < SMI_COMMON_MISC_NR; i++)
+		writel_relaxed(common->plat->misc[i].value,
+			       common->base + common->plat->misc[i].value);
+	wmb(); /* make sure settings are written */
 	return 0;
 }