diff mbox series

[3/4,3/4] mmc: mediatek: command queue support

Message ID 1581921111-24172-4-git-send-email-chun-hung.wu@mediatek.com (mailing list archive)
State New, archived
Headers show
Series mmc: mediatek: add mmc cqhci support | expand

Commit Message

Chun-Hung Wu (巫駿宏) Feb. 17, 2020, 6:31 a.m. UTC
Support command queue for mt6779 platform.
a. Add msdc_set_busy_timeout() to calculate emmc write timeout
b. Connect mtk msdc driver to cqhci driver through
   host->cq_host->ops = &msdc_cmdq_ops;
c. msdc_cmdq_irq() will link up with cqchi_irq(). Besides, it provides
   more irq error messages like RSPCRCERR/CMDTO/DATACRCERR/DATTMO.
d. Use the options below to separate support for CQHCI or not, because
   some of our platform does not support CQHCI hence no kernel option:
   CONFIG_MMC_CQHCI.
   #if IS_ENABLED(CONFIG_MMC_CQHCI)
   XXX //Support CQHCI
   #else
   XXX //Not support CQHCI
   #endif

---
 drivers/mmc/host/mtk-sd.c | 119 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 119 insertions(+)
diff mbox series

Patch

diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 127b0cf..b132397 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -31,6 +31,8 @@ 
 #include <linux/mmc/sdio.h>
 #include <linux/mmc/slot-gpio.h>
 
+#include "cqhci.h"
+
 #define MAX_BD_NUM          1024
 
 /*--------------------------------------------------------------------------*/
@@ -151,6 +153,7 @@ 
 #define MSDC_INT_DMA_BDCSERR    (0x1 << 17)	/* W1C */
 #define MSDC_INT_DMA_GPDCSERR   (0x1 << 18)	/* W1C */
 #define MSDC_INT_DMA_PROTECT    (0x1 << 19)	/* W1C */
+#define MSDC_INT_CMDQ           (0x1 << 28)	/* W1C */
 
 /* MSDC_INTEN mask */
 #define MSDC_INTEN_MMCIRQ       (0x1 << 0)	/* RW */
@@ -181,6 +184,7 @@ 
 /* SDC_CFG mask */
 #define SDC_CFG_SDIOINTWKUP     (0x1 << 0)	/* RW */
 #define SDC_CFG_INSWKUP         (0x1 << 1)	/* RW */
+#define SDC_CFG_WRDTOC          (0x1fff  << 2)  /* RW */
 #define SDC_CFG_BUSWIDTH        (0x3 << 16)	/* RW */
 #define SDC_CFG_SDIO            (0x1 << 19)	/* RW */
 #define SDC_CFG_SDIOIDE         (0x1 << 20)	/* RW */
@@ -228,6 +232,7 @@ 
 #define MSDC_PATCH_BIT_SPCPUSH    (0x1 << 29)	/* RW */
 #define MSDC_PATCH_BIT_DECRCTMO   (0x1 << 30)	/* RW */
 
+#define MSDC_PB1_BUSY_CHECK_SEL   (0x1 << 7)    /* RW */
 #define MSDC_PATCH_BIT1_STOP_DLY  (0xf << 8)    /* RW */
 
 #define MSDC_PATCH_BIT2_CFGRESP   (0x1 << 15)   /* RW */
@@ -431,6 +436,7 @@  struct msdc_host {
 	struct msdc_save_para save_para; /* used when gate HCLK */
 	struct msdc_tune_para def_tune_para; /* default tune setting */
 	struct msdc_tune_para saved_tune_para; /* tune result of CMD21/CMD19 */
+	struct cqhci_host *cq_host;
 };
 
 static const struct mtk_mmc_compatible mt8135_compat = {
@@ -527,6 +533,18 @@  struct msdc_host {
 	.use_internal_cd = true,
 };
 
+static const struct mtk_mmc_compatible mt6779_compat = {
+	.clk_div_bits = 12,
+	.hs400_tune = false,
+	.pad_tune_reg = MSDC_PAD_TUNE0,
+	.async_fifo = true,
+	.data_tune = true,
+	.busy_check = true,
+	.stop_clk_fix = true,
+	.enhance_rx = true,
+	.support_64g = true,
+};
+
 static const struct of_device_id msdc_of_ids[] = {
 	{ .compatible = "mediatek,mt8135-mmc", .data = &mt8135_compat},
 	{ .compatible = "mediatek,mt8173-mmc", .data = &mt8173_compat},
@@ -536,6 +554,7 @@  struct msdc_host {
 	{ .compatible = "mediatek,mt7622-mmc", .data = &mt7622_compat},
 	{ .compatible = "mediatek,mt8516-mmc", .data = &mt8516_compat},
 	{ .compatible = "mediatek,mt7620-mmc", .data = &mt7620_compat},
+	{ .compatible = "mediatek,mt6779-mmc", .data = &mt6779_compat},
 	{}
 };
 MODULE_DEVICE_TABLE(of, msdc_of_ids);
@@ -739,6 +758,15 @@  static void msdc_set_timeout(struct msdc_host *host, u64 ns, u64 clks)
 		      (u32)(timeout > 255 ? 255 : timeout));
 }
 
+static void msdc_set_busy_timeout(struct msdc_host *host, u64 ns, u64 clks)
+{
+	u64 timeout;
+
+	timeout = msdc_timeout_cal(host, ns, clks);
+	sdr_set_field(host->base + SDC_CFG, SDC_CFG_WRDTOC,
+		      (u32)(timeout > 8191 ? 8191 : timeout));
+}
+
 static void msdc_gate_clock(struct msdc_host *host)
 {
 	clk_disable_unprepare(host->src_clk_cg);
@@ -1425,6 +1453,36 @@  static void msdc_enable_sdio_irq(struct mmc_host *mmc, int enb)
 		pm_runtime_put_noidle(host->dev);
 }
 
+#if IS_ENABLED(CONFIG_MMC_CQHCI)
+static irqreturn_t msdc_cmdq_irq(struct msdc_host *host, u32 intsts)
+{
+	int cmd_err = 0, dat_err = 0;
+
+	if (intsts & MSDC_INT_RSPCRCERR) {
+		cmd_err = (unsigned int)-EILSEQ;
+		dev_err(host->dev, "%s: CMD CRC ERR", __func__);
+	} else if (intsts & MSDC_INT_CMDTMO) {
+		cmd_err = (unsigned int)-ETIMEDOUT;
+		dev_err(host->dev, "%s: CMD TIMEOUT ERR", __func__);
+	}
+
+	if (intsts & MSDC_INT_DATCRCERR) {
+		dat_err = (unsigned int)-EILSEQ;
+		dev_err(host->dev, "%s: DATA CRC ERR", __func__);
+	} else if (intsts & MSDC_INT_DATTMO) {
+		dat_err = (unsigned int)-ETIMEDOUT;
+		dev_err(host->dev, "%s: DATA TIMEOUT ERR", __func__);
+	}
+
+	if (cmd_err || dat_err) {
+		dev_err(host->dev, "cmd_err = %d, dat_err =%d, intsts = 0x%x",
+			cmd_err, dat_err, intsts);
+	}
+
+	return cqhci_irq(host->mmc, 0, cmd_err, dat_err);
+}
+#endif
+
 static irqreturn_t msdc_irq(int irq, void *dev_id)
 {
 	struct msdc_host *host = (struct msdc_host *) dev_id;
@@ -1461,6 +1519,16 @@  static irqreturn_t msdc_irq(int irq, void *dev_id)
 		if (!(events & (event_mask & ~MSDC_INT_SDIOIRQ)))
 			break;
 
+#if IS_ENABLED(CONFIG_MMC_CQHCI)
+		if ((host->mmc->caps2 & MMC_CAP2_CQE) &&
+		    (events & MSDC_INT_CMDQ)) {
+			msdc_cmdq_irq(host, events);
+			/* clear interrupts */
+			writel(events, host->base + MSDC_INT);
+			return IRQ_HANDLED;
+		}
+#endif
+
 		if (!mrq) {
 			dev_err(host->dev,
 				"%s: MRQ=NULL; events=%08X; event_mask=%08X\n",
@@ -2144,6 +2212,36 @@  static int msdc_get_cd(struct mmc_host *mmc)
 		return !val;
 }
 
+static void msdc_cqe_enable(struct mmc_host *mmc)
+{
+	struct msdc_host *host = mmc_priv(mmc);
+
+	/* enable cmdq irq */
+	writel(MSDC_INT_CMDQ, host->base + MSDC_INTEN);
+	/* enable busy check */
+	sdr_set_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL);
+	/* default write data / busy timeout 20s */
+	msdc_set_busy_timeout(host, 20 * 1000000000ULL, 0);
+	/* default read data timeout 1s */
+	msdc_set_timeout(host, 1000000000ULL, 0);
+}
+
+void msdc_cqe_disable(struct mmc_host *mmc, bool recovery)
+{
+	struct msdc_host *host = mmc_priv(mmc);
+
+	/* disable cmdq irq */
+	sdr_clr_bits(host->base + MSDC_INTEN, MSDC_INT_CMDQ);
+	/* disable busy check */
+	sdr_clr_bits(host->base + MSDC_PATCH_BIT1, MSDC_PB1_BUSY_CHECK_SEL);
+
+	if (recovery) {
+		sdr_set_field(host->base + MSDC_DMA_CTRL,
+			      MSDC_DMA_CTRL_STOP, 1);
+		msdc_reset_hw(host);
+	}
+}
+
 static const struct mmc_host_ops mt_msdc_ops = {
 	.post_req = msdc_post_req,
 	.pre_req = msdc_pre_req,
@@ -2160,6 +2258,11 @@  static int msdc_get_cd(struct mmc_host *mmc)
 	.hw_reset = msdc_hw_reset,
 };
 
+static const struct cqhci_host_ops msdc_cmdq_ops = {
+	.enable         = msdc_cqe_enable,
+	.disable        = msdc_cqe_disable,
+};
+
 static void msdc_of_property_parse(struct platform_device *pdev,
 				   struct msdc_host *host)
 {
@@ -2311,6 +2414,22 @@  static int msdc_drv_probe(struct platform_device *pdev)
 		host->dma_mask = DMA_BIT_MASK(32);
 	mmc_dev(mmc)->dma_mask = &host->dma_mask;
 
+#if IS_ENABLED(CONFIG_MMC_CQHCI)
+	if (mmc->caps2 & MMC_CAP2_CQE) {
+		host->cq_host = devm_kzalloc(host->mmc->parent,
+					     sizeof(*host->cq_host),
+					     GFP_KERNEL);
+		host->cq_host->caps |= CQHCI_TASK_DESC_SZ_128;
+		host->cq_host->mmio = host->base + 0x800;
+		host->cq_host->ops = &msdc_cmdq_ops;
+		cqhci_init(host->cq_host, mmc, true);
+		mmc->max_segs = 128;
+		/* cqhci 16bit length */
+		/* 0 size, means 65536 so we don't have to -1 here */
+		mmc->max_seg_size = 64 * 1024;
+	}
+#endif
+
 	host->timeout_clks = 3 * 1048576;
 	host->dma.gpd = dma_alloc_coherent(&pdev->dev,
 				2 * sizeof(struct mt_gpdma_desc),