diff mbox series

[3/4] mfd: mt6360: Fix flow which is used to check ic exist

Message ID 1594117856-14343-4-git-send-email-gene.chen.richtek@gmail.com (mailing list archive)
State New, archived
Headers show
Series mfd: mt6360: Merge different sub-devices i2c read/write | expand

Commit Message

Gene Chen July 7, 2020, 10:30 a.m. UTC
From: Gene Chen <gene_chen@richtek.com>

Fix flow which is used to check ic exist

Signed-off-by: Gene Chen <gene_chen@richtek.com>
---
 drivers/mfd/mt6360-core.c  | 28 +++++++++++++++++++---------
 include/linux/mfd/mt6360.h |  8 ++++----
 2 files changed, 23 insertions(+), 13 deletions(-)

Comments

Matthias Brugger July 10, 2020, 2:25 p.m. UTC | #1
On 07/07/2020 12:30, Gene Chen wrote:
> From: Gene Chen <gene_chen@richtek.com>
> 
> Fix flow which is used to check ic exist
> 
> Signed-off-by: Gene Chen <gene_chen@richtek.com>
> ---
>   drivers/mfd/mt6360-core.c  | 28 +++++++++++++++++++---------
>   include/linux/mfd/mt6360.h |  8 ++++----
>   2 files changed, 23 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/mfd/mt6360-core.c b/drivers/mfd/mt6360-core.c
> index 2dd5918..4bb2949 100644
> --- a/drivers/mfd/mt6360-core.c
> +++ b/drivers/mfd/mt6360-core.c
> @@ -293,6 +293,23 @@ static const struct mfd_cell mt6360_devs[] = {
>   		    NULL, 0, 0, "mediatek,mt6360-tcpc"),
>   };
>   
> +static int mt6360_check_vendor_info(struct mt6360_data *data)
> +{
> +	u32 info;
> +	int ret;
> +
> +	ret = regmap_read(data->regmap, MT6360_REG_PMU_DEVINFO, &info);
> +	if (ret < 0)
> +		return ret;
> +
> +	if ((info & MT6360_CHIPVEN_MASK) != MT6360_CHIPVEN_VAL)
> +		return -ENODEV;
> +
> +	data->chip_rev = info & MT6360_CHIPREV_MASK;
> +
> +	return 0;
> +}
> +
>   static const unsigned short mt6360_slave_addr[MT6360_SLAVE_MAX] = {
>   	MT6360_PMU_SLAVEID,
>   	MT6360_PMIC_SLAVEID,
> @@ -303,7 +320,6 @@ static const unsigned short mt6360_slave_addr[MT6360_SLAVE_MAX] = {
>   static int mt6360_probe(struct i2c_client *client)
>   {
>   	struct mt6360_data *data;
> -	unsigned int reg_data;
>   	int i, ret;
>   
>   	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
> @@ -319,16 +335,10 @@ static int mt6360_probe(struct i2c_client *client)
>   		return PTR_ERR(data->regmap);
>   	}
>   
> -	ret = regmap_read(data->regmap, MT6360_PMU_DEV_INFO, &reg_data);
> +	ret = mt6360_check_vendor_info(data);
>   	if (ret) {
> -		dev_err(&client->dev, "Device not found\n");
> -		return ret;
> -	}
> -
> -	data->chip_rev = reg_data & CHIP_REV_MASK;
> -	if (data->chip_rev != CHIP_VEN_MT6360) {

Why not only applying the MASK here instead of put this all in a new function?

>   		dev_err(&client->dev, "Device not supported\n");
> -		return -ENODEV;
> +		return ret;
>   	}
>   
>   	ret = devm_regmap_add_irq_chip(&client->dev, data->regmap, client->irq,
> diff --git a/include/linux/mfd/mt6360.h b/include/linux/mfd/mt6360.h
> index 9fc6718..5ec0f5d 100644
> --- a/include/linux/mfd/mt6360.h
> +++ b/include/linux/mfd/mt6360.h
> @@ -30,7 +30,7 @@ struct mt6360_data {
>   };
>   
>   /* PMU register defininition */
> -#define MT6360_PMU_DEV_INFO			(0x00)
> +#define MT6360_REG_PMU_DEVINFO			(0x00)
>   #define MT6360_PMU_CORE_CTRL1			(0x01)
>   #define MT6360_PMU_RST1				(0x02)
>   #define MT6360_PMU_CRCEN			(0x03)
> @@ -233,8 +233,8 @@ struct mt6360_data {
>   #define MT6360_IRQ_REGNUM	16
>   #define MT6360_IRQ_RETRIG	BIT(2)
>   
> -#define CHIP_VEN_MASK				(0xF0)
> -#define CHIP_VEN_MT6360				(0x50)
> -#define CHIP_REV_MASK				(0x0F)
> +#define MT6360_CHIPVEN_MASK			(0xF0)
> +#define MT6360_CHIPVEN_VAL			(0x50)
> +#define MT6360_CHIPREV_MASK			(0x0F)

Same here as in the other patches. Don't just rename defines if there is no good 
reason.

Regards,
Matthias

>   
>   #endif /* __MT6360_H__ */
>
Gene Chen July 16, 2020, 9:53 a.m. UTC | #2
Matthias Brugger <matthias.bgg@gmail.com> 於 2020年7月10日 週五 下午10:25寫道:
>
>
>
> On 07/07/2020 12:30, Gene Chen wrote:
> > From: Gene Chen <gene_chen@richtek.com>
> >
> > Fix flow which is used to check ic exist
> >
> > Signed-off-by: Gene Chen <gene_chen@richtek.com>
> > ---
> >   drivers/mfd/mt6360-core.c  | 28 +++++++++++++++++++---------
> >   include/linux/mfd/mt6360.h |  8 ++++----
> >   2 files changed, 23 insertions(+), 13 deletions(-)
> >
> > diff --git a/drivers/mfd/mt6360-core.c b/drivers/mfd/mt6360-core.c
> > index 2dd5918..4bb2949 100644
> > --- a/drivers/mfd/mt6360-core.c
> > +++ b/drivers/mfd/mt6360-core.c
> > @@ -293,6 +293,23 @@ static const struct mfd_cell mt6360_devs[] = {
> >                   NULL, 0, 0, "mediatek,mt6360-tcpc"),
> >   };
> >
> > +static int mt6360_check_vendor_info(struct mt6360_data *data)
> > +{
> > +     u32 info;
> > +     int ret;
> > +
> > +     ret = regmap_read(data->regmap, MT6360_REG_PMU_DEVINFO, &info);
> > +     if (ret < 0)
> > +             return ret;
> > +
> > +     if ((info & MT6360_CHIPVEN_MASK) != MT6360_CHIPVEN_VAL)
> > +             return -ENODEV;
> > +
> > +     data->chip_rev = info & MT6360_CHIPREV_MASK;
> > +
> > +     return 0;
> > +}
> > +
> >   static const unsigned short mt6360_slave_addr[MT6360_SLAVE_MAX] = {
> >       MT6360_PMU_SLAVEID,
> >       MT6360_PMIC_SLAVEID,
> > @@ -303,7 +320,6 @@ static const unsigned short mt6360_slave_addr[MT6360_SLAVE_MAX] = {
> >   static int mt6360_probe(struct i2c_client *client)
> >   {
> >       struct mt6360_data *data;
> > -     unsigned int reg_data;
> >       int i, ret;
> >
> >       data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
> > @@ -319,16 +335,10 @@ static int mt6360_probe(struct i2c_client *client)
> >               return PTR_ERR(data->regmap);
> >       }
> >
> > -     ret = regmap_read(data->regmap, MT6360_PMU_DEV_INFO, &reg_data);
> > +     ret = mt6360_check_vendor_info(data);
> >       if (ret) {
> > -             dev_err(&client->dev, "Device not found\n");
> > -             return ret;
> > -     }
> > -
> > -     data->chip_rev = reg_data & CHIP_REV_MASK;
> > -     if (data->chip_rev != CHIP_VEN_MT6360) {
>
> Why not only applying the MASK here instead of put this all in a new function?
>

I think merge the ic check flow into function is well-organized.
if not, i can restore the same as before.

> >               dev_err(&client->dev, "Device not supported\n");
> > -             return -ENODEV;
> > +             return ret;
> >       }
> >
> >       ret = devm_regmap_add_irq_chip(&client->dev, data->regmap, client->irq,
> > diff --git a/include/linux/mfd/mt6360.h b/include/linux/mfd/mt6360.h
> > index 9fc6718..5ec0f5d 100644
> > --- a/include/linux/mfd/mt6360.h
> > +++ b/include/linux/mfd/mt6360.h
> > @@ -30,7 +30,7 @@ struct mt6360_data {
> >   };
> >
> >   /* PMU register defininition */
> > -#define MT6360_PMU_DEV_INFO                  (0x00)
> > +#define MT6360_REG_PMU_DEVINFO                       (0x00)
> >   #define MT6360_PMU_CORE_CTRL1                       (0x01)
> >   #define MT6360_PMU_RST1                             (0x02)
> >   #define MT6360_PMU_CRCEN                    (0x03)
> > @@ -233,8 +233,8 @@ struct mt6360_data {
> >   #define MT6360_IRQ_REGNUM   16
> >   #define MT6360_IRQ_RETRIG   BIT(2)
> >
> > -#define CHIP_VEN_MASK                                (0xF0)
> > -#define CHIP_VEN_MT6360                              (0x50)
> > -#define CHIP_REV_MASK                                (0x0F)
> > +#define MT6360_CHIPVEN_MASK                  (0xF0)
> > +#define MT6360_CHIPVEN_VAL                   (0x50)
> > +#define MT6360_CHIPREV_MASK                  (0x0F)
>
> Same here as in the other patches. Don't just rename defines if there is no good
> reason.
>

Is easy to read a good reason to rename it?
if not, i can restore the same as before.

> Regards,
> Matthias
>
> >
> >   #endif /* __MT6360_H__ */
> >
diff mbox series

Patch

diff --git a/drivers/mfd/mt6360-core.c b/drivers/mfd/mt6360-core.c
index 2dd5918..4bb2949 100644
--- a/drivers/mfd/mt6360-core.c
+++ b/drivers/mfd/mt6360-core.c
@@ -293,6 +293,23 @@  static const struct mfd_cell mt6360_devs[] = {
 		    NULL, 0, 0, "mediatek,mt6360-tcpc"),
 };
 
+static int mt6360_check_vendor_info(struct mt6360_data *data)
+{
+	u32 info;
+	int ret;
+
+	ret = regmap_read(data->regmap, MT6360_REG_PMU_DEVINFO, &info);
+	if (ret < 0)
+		return ret;
+
+	if ((info & MT6360_CHIPVEN_MASK) != MT6360_CHIPVEN_VAL)
+		return -ENODEV;
+
+	data->chip_rev = info & MT6360_CHIPREV_MASK;
+
+	return 0;
+}
+
 static const unsigned short mt6360_slave_addr[MT6360_SLAVE_MAX] = {
 	MT6360_PMU_SLAVEID,
 	MT6360_PMIC_SLAVEID,
@@ -303,7 +320,6 @@  static const unsigned short mt6360_slave_addr[MT6360_SLAVE_MAX] = {
 static int mt6360_probe(struct i2c_client *client)
 {
 	struct mt6360_data *data;
-	unsigned int reg_data;
 	int i, ret;
 
 	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
@@ -319,16 +335,10 @@  static int mt6360_probe(struct i2c_client *client)
 		return PTR_ERR(data->regmap);
 	}
 
-	ret = regmap_read(data->regmap, MT6360_PMU_DEV_INFO, &reg_data);
+	ret = mt6360_check_vendor_info(data);
 	if (ret) {
-		dev_err(&client->dev, "Device not found\n");
-		return ret;
-	}
-
-	data->chip_rev = reg_data & CHIP_REV_MASK;
-	if (data->chip_rev != CHIP_VEN_MT6360) {
 		dev_err(&client->dev, "Device not supported\n");
-		return -ENODEV;
+		return ret;
 	}
 
 	ret = devm_regmap_add_irq_chip(&client->dev, data->regmap, client->irq,
diff --git a/include/linux/mfd/mt6360.h b/include/linux/mfd/mt6360.h
index 9fc6718..5ec0f5d 100644
--- a/include/linux/mfd/mt6360.h
+++ b/include/linux/mfd/mt6360.h
@@ -30,7 +30,7 @@  struct mt6360_data {
 };
 
 /* PMU register defininition */
-#define MT6360_PMU_DEV_INFO			(0x00)
+#define MT6360_REG_PMU_DEVINFO			(0x00)
 #define MT6360_PMU_CORE_CTRL1			(0x01)
 #define MT6360_PMU_RST1				(0x02)
 #define MT6360_PMU_CRCEN			(0x03)
@@ -233,8 +233,8 @@  struct mt6360_data {
 #define MT6360_IRQ_REGNUM	16
 #define MT6360_IRQ_RETRIG	BIT(2)
 
-#define CHIP_VEN_MASK				(0xF0)
-#define CHIP_VEN_MT6360				(0x50)
-#define CHIP_REV_MASK				(0x0F)
+#define MT6360_CHIPVEN_MASK			(0xF0)
+#define MT6360_CHIPVEN_VAL			(0x50)
+#define MT6360_CHIPREV_MASK			(0x0F)
 
 #endif /* __MT6360_H__ */