| Message ID | 1608725624-30594-3-git-send-email-hsin-hsiung.wang@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add support for MT6315 regulator | expand |
On Wed, Dec 23, 2020 at 8:13 PM Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> wrote: > > The MT6315 is a regulator found on boards based on MediaTek MT8192 and > probably other SoCs. It connects as a slave to SoC using SPMI. > > Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> > --- > drivers/regulator/Kconfig | 10 + > drivers/regulator/Makefile | 1 + > drivers/regulator/mt6315-regulator.c | 298 +++++++++++++++++++++ > include/linux/regulator/mt6315-regulator.h | 45 ++++ > 4 files changed, 354 insertions(+) > create mode 100644 drivers/regulator/mt6315-regulator.c > create mode 100644 include/linux/regulator/mt6315-regulator.h > > diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig > index 020a00d6696b..65612ba2734f 100644 > --- a/drivers/regulator/Kconfig > +++ b/drivers/regulator/Kconfig > @@ -703,6 +703,16 @@ config REGULATOR_MT6311 > This driver supports the control of different power rails of device > through regulator interface. > > +config REGULATOR_MT6315 > + tristate "MediaTek MT6315 PMIC" > + depends on SPMI > + select REGMAP_SPMI > + help > + Say y here to select this option to enable the power regulator of > + MediaTek MT6315 PMIC. > + This driver supports the control of different power rails of device > + through regulator interface. > + > config REGULATOR_MT6323 > tristate "MediaTek MT6323 PMIC" > depends on MFD_MT6397 > diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile > index 6ebae516258e..b2f47dd67112 100644 > --- a/drivers/regulator/Makefile > +++ b/drivers/regulator/Makefile > @@ -87,6 +87,7 @@ obj-$(CONFIG_REGULATOR_MP8859) += mp8859.o > obj-$(CONFIG_REGULATOR_MP886X) += mp886x.o > obj-$(CONFIG_REGULATOR_MPQ7920) += mpq7920.o > obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o > +obj-$(CONFIG_REGULATOR_MT6315) += mt6315-regulator.o > obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o > obj-$(CONFIG_REGULATOR_MT6358) += mt6358-regulator.o > obj-$(CONFIG_REGULATOR_MT6360) += mt6360-regulator.o > diff --git a/drivers/regulator/mt6315-regulator.c b/drivers/regulator/mt6315-regulator.c > new file mode 100644 > index 000000000000..57ef628d48b4 > --- /dev/null > +++ b/drivers/regulator/mt6315-regulator.c > @@ -0,0 +1,298 @@ > +// SPDX-License-Identifier: GPL-2.0 > +// > +// Copyright (c) 2020 MediaTek Inc. > + > +#include <linux/interrupt.h> > +#include <linux/module.h> > +#include <linux/of_device.h> > +#include <linux/of_irq.h> Do you need this one? I don't see any IRQ-related function > +#include <linux/platform_device.h> > +#include <linux/regmap.h> > +#include <linux/regulator/driver.h> > +#include <linux/regulator/machine.h> > +#include <linux/regulator/mt6315-regulator.h> > +#include <linux/regulator/of_regulator.h> > +#include <linux/spmi.h> > + > +#define MT6315_REG_WIDTH 8 Unused. > + > +#define MT6315_BUCK_MODE_AUTO 0 > +#define MT6315_BUCK_MODE_FORCE_PWM 1 > +#define MT6315_BUCK_MODE_LP 2 > + > +struct mt6315_regulator_info { > + struct regulator_desc desc; > + u32 status_reg; > + u32 lp_mode_mask; > + u32 lp_mode_shift; > +}; > + > +struct mt_regulator_init_data { > + u32 slvid; > + u32 modeset_mask[MT6315_VBUCK_MAX]; > +}; > + > +struct mt6315_chip { > + struct device *dev; > + struct regmap *regmap; > +}; > + > +#define MT_BUCK(_name, _bid, _vsel) \ > +[_bid] = { \ > + .desc = { \ > + .name = _name, \ > + .of_match = of_match_ptr(_name), \ > + .regulators_node = "regulators", \ > + .ops = &mt6315_volt_range_ops, \ > + .type = REGULATOR_VOLTAGE, \ > + .id = _bid, \ > + .owner = THIS_MODULE, \ > + .n_voltages = 0xbf, \ > + .linear_ranges = mt_volt_range1, \ > + .n_linear_ranges = ARRAY_SIZE(mt_volt_range1), \ > + .vsel_reg = _vsel, \ > + .vsel_mask = 0xff, \ > + .enable_reg = MT6315_BUCK_TOP_CON0, \ > + .enable_mask = BIT(_bid), \ > + .of_map_mode = mt6315_map_mode, \ > + }, \ > + .status_reg = _bid##_DBG4, \ > + .lp_mode_mask = BIT(_bid), \ > + .lp_mode_shift = _bid, \ > +} > + > +static const struct linear_range mt_volt_range1[] = { > + REGULATOR_LINEAR_RANGE(0, 0, 0xbf, 6250), > +}; > + > +static unsigned int mt6315_map_mode(u32 mode) > +{ > + switch (mode) { > + case MT6315_BUCK_MODE_AUTO: > + return REGULATOR_MODE_NORMAL; > + case MT6315_BUCK_MODE_FORCE_PWM: > + return REGULATOR_MODE_FAST; > + case MT6315_BUCK_MODE_LP: > + return REGULATOR_MODE_IDLE; > + default: > + return -EINVAL; > + } > +} > + > +static unsigned int mt6315_regulator_get_mode(struct regulator_dev *rdev) > +{ > + struct mt_regulator_init_data *init = rdev_get_drvdata(rdev); > + const struct mt6315_regulator_info *info = (struct mt6315_regulator_info *)rdev->desc; This is a little bit scary at first sight, please use container_of instead: container_of(rdev->desc, struct mt6315_regulator_info, desc) > + int ret, regval; > + u32 modeset_mask; > + > + modeset_mask = init->modeset_mask[rdev_get_id(rdev)]; > + ret = regmap_read(rdev->regmap, MT6315_BUCK_TOP_4PHASE_ANA_CON42, ®val); > + if (ret != 0) { > + dev_notice(&rdev->dev, "Failed to get mode: %d\n", ret); > + return ret; > + } > + > + if ((regval & modeset_mask) == modeset_mask) > + return REGULATOR_MODE_FAST; > + > + ret = regmap_read(rdev->regmap, MT6315_BUCK_TOP_CON1, ®val); > + if (ret != 0) { > + dev_notice(&rdev->dev, "Failed to get lp mode: %d\n", ret); > + return ret; > + } > + > + if (regval & info->lp_mode_mask) > + return REGULATOR_MODE_IDLE; > + else > + return REGULATOR_MODE_NORMAL; > +} > + > +static int mt6315_regulator_set_mode(struct regulator_dev *rdev, > + u32 mode) > +{ > + struct mt_regulator_init_data *init = rdev_get_drvdata(rdev); > + const struct mt6315_regulator_info *info = (struct mt6315_regulator_info *)rdev->desc; ditto (container_of) > + int ret, val, curr_mode; > + u32 modeset_mask; > + > + modeset_mask = init->modeset_mask[rdev_get_id(rdev)]; > + curr_mode = mt6315_regulator_get_mode(rdev); > + switch (mode) { > + case REGULATOR_MODE_FAST: This seems to assume that you can't transition from REGULATOR_MODE_IDLE to REGULATOR_MODE_FAST directly? Is that guaranteed? > + ret = regmap_update_bits(rdev->regmap, > + MT6315_BUCK_TOP_4PHASE_ANA_CON42, > + modeset_mask, > + modeset_mask); > + break; > + case REGULATOR_MODE_NORMAL: > + if (curr_mode == REGULATOR_MODE_FAST) { > + ret = regmap_update_bits(rdev->regmap, > + MT6315_BUCK_TOP_4PHASE_ANA_CON42, > + modeset_mask, > + 0); > + } else if (curr_mode == REGULATOR_MODE_IDLE) { > + ret = regmap_update_bits(rdev->regmap, > + MT6315_BUCK_TOP_CON1, > + info->lp_mode_mask, > + 0); > + usleep_range(100, 110); > + } > + break; > + case REGULATOR_MODE_IDLE: > + val = MT6315_BUCK_MODE_LP >> 1; > + val <<= info->lp_mode_shift; > + ret = regmap_update_bits(rdev->regmap, > + MT6315_BUCK_TOP_CON1, > + info->lp_mode_mask, > + val); > + break; > + default: > + ret = -EINVAL; > + dev_notice(&rdev->dev, "Not support (%d)\n", mode); "Unsupported mode: %d\n" > + break; > + } > + > + if (ret != 0) { > + dev_notice(&rdev->dev, "Failed to set mode: %d\n", ret); > + return ret; > + } > + > + return 0; > +} > + > +static int mt6315_get_status(struct regulator_dev *rdev) > +{ > + const struct mt6315_regulator_info *info = (struct mt6315_regulator_info *)rdev->desc; ditto (container_of) > + int ret; > + u32 regval; > + > + ret = regmap_read(rdev->regmap, info->status_reg, ®val); > + if (ret < 0) { > + dev_notice(&rdev->dev, "Failed to get enable reg: %d\n", ret); > + return ret; > + } > + > + return (regval & BIT(0)) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF; > +} > + > +static const struct regulator_ops mt6315_volt_range_ops = { > + .list_voltage = regulator_list_voltage_linear_range, > + .map_voltage = regulator_map_voltage_linear_range, > + .set_voltage_sel = regulator_set_voltage_sel_regmap, > + .get_voltage_sel = regulator_get_voltage_sel_regmap, > + .set_voltage_time_sel = regulator_set_voltage_time_sel, > + .enable = regulator_enable_regmap, > + .disable = regulator_disable_regmap, > + .is_enabled = regulator_is_enabled_regmap, > + .get_status = mt6315_get_status, > + .set_mode = mt6315_regulator_set_mode, > + .get_mode = mt6315_regulator_get_mode, > +}; > + > +static const struct mt6315_regulator_info mt6315_regulators[MT6315_VBUCK_MAX] = { > + MT_BUCK("vbuck1", MT6315_VBUCK1, MT6315_BUCK_TOP_ELR0), > + MT_BUCK("vbuck2", MT6315_VBUCK2, MT6315_BUCK_TOP_ELR2), > + MT_BUCK("vbuck3", MT6315_VBUCK3, MT6315_BUCK_TOP_ELR4), > + MT_BUCK("vbuck4", MT6315_VBUCK4, MT6315_BUCK_TOP_ELR6), > +}; > + > +static const struct regmap_config mt6315_regmap_config = { > + .reg_bits = 16, > + .val_bits = 8, > + .max_register = 0x16d0, > + .fast_io = true, > +}; > + > +static const struct of_device_id mt6315_of_match[] = { > + { > + .compatible = "mediatek,mt6315-regulator", > + }, { > + /* sentinel */ > + }, > +}; > +MODULE_DEVICE_TABLE(of, mt6315_of_match); > + > +static int mt6315_regulator_probe(struct spmi_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct regmap *regmap; > + struct mt6315_chip *chip; > + struct mt_regulator_init_data *init_data; > + struct regulator_config config = {}; > + struct regulator_dev *rdev; > + int i; > + > + regmap = devm_regmap_init_spmi_ext(pdev, &mt6315_regmap_config); > + if (!regmap) > + return -ENODEV; > + > + chip = devm_kzalloc(dev, sizeof(struct mt6315_chip), GFP_KERNEL); > + if (!chip) > + return -ENOMEM; > + > + init_data = devm_kzalloc(dev, sizeof(struct mt_regulator_init_data), GFP_KERNEL); > + if (!init_data) > + return -ENOMEM; > + > + chip->dev = dev; > + chip->regmap = regmap; > + dev_set_drvdata(dev, chip); > + > + config.dev = dev; > + config.regmap = regmap; > + for (i = MT6315_VBUCK1; i < MT6315_VBUCK_MAX; i++) { > + init_data->modeset_mask[i] = 1 << (i - 1); BIT(i-1) But, wait, MT6315_VBUCK1 is 0 right? Should this just be 1 << i ==> BIT(i) ? > + config.driver_data = init_data; > + rdev = devm_regulator_register(dev, &mt6315_regulators[i].desc, &config); This also initializes the regulators 2,4 on MT6315_CPU, is that ok? I'd assume we'd not want to initialize those linked regulators (and that's what your previous change did) > + if (IS_ERR(rdev)) { > + dev_notice(dev, "Failed to register %s\n", mt6315_regulators[i].desc.name); > + continue; > + } It feels incorrect to call devm_regulator_register before modeset_mask has been set properly... 2 options: 1. Fold the logic below into this loop. 2. Something like this: switch (init_data->slvid) { init_data->modeset_mask[MT6315_VBUCK1] = 0x3, 0xB, or default 0x1; } for (i = MT6315_VBUCK2; i < MT6315_VBUCK_MAX; i++) init_data->modeset_mask[i] = 1 << i; for (i = MT6315_VBUCK1; i < MT6315_VBUCK_MAX; i++) { devm_regulator_register() } > + } > + > + init_data->slvid = pdev->usid; > + switch (init_data->slvid) { Just use pdev->usid directly here? (you don't use init_data->slvid anywhere else so it doesn't seem useful to copy it) > + case MT6315_CPU: > + init_data->modeset_mask[MT6315_VBUCK1] = 0xB; I'd almost prefer seeing BIT(MT6315_VBUCK1) | BIT(MT6315_VBUCK2) | BIT(MT6315_VBUCK4) (or maybe add a small comment above this line to explain that 1,2,4 are combined) > + break; > + case MT6315_GPU: > + case MT6315_MD: > + init_data->modeset_mask[MT6315_VBUCK1] = 0x3; > + break; > + default: > + break; > + } Oh, I see, so you got rid of the device tree property `mtk,combined-regulator` and instead match the USID (it would have been great to document that clearly in your changelog). I think this is ok as long as all MT6315 part numbers have a different USID, but please see my comment below. > + > + return 0; > +} > + > +static void mt6315_regulator_shutdown(struct spmi_device *pdev) > +{ > + struct mt6315_chip *chip = dev_get_drvdata(&pdev->dev); > + int ret = 0; > + > + ret |= regmap_write(chip->regmap, MT6315_TOP_TMA_KEY_H, PROTECTION_KEY_H); > + ret |= regmap_write(chip->regmap, MT6315_TOP_TMA_KEY, PROTECTION_KEY); > + ret |= regmap_update_bits(chip->regmap, MT6315_TOP2_ELR7, 1, 1); > + ret |= regmap_write(chip->regmap, MT6315_TOP_TMA_KEY, 0); > + ret |= regmap_write(chip->regmap, MT6315_TOP_TMA_KEY_H, 0); > + if (ret < 0) > + dev_notice(&pdev->dev, "[%#x] Failed to enable power off sequence. %d\n", > + pdev->usid, ret); > +} > + > +static struct spmi_driver mt6315_regulator_driver = { > + .driver = { > + .name = "mt6315-regulator", > + .of_match_table = mt6315_of_match, > + }, > + .probe = mt6315_regulator_probe, > + .shutdown = mt6315_regulator_shutdown, > +}; > + > +module_spmi_driver(mt6315_regulator_driver); > + > +MODULE_AUTHOR("Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>"); > +MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6315 PMIC"); > +MODULE_LICENSE("GPL"); > diff --git a/include/linux/regulator/mt6315-regulator.h b/include/linux/regulator/mt6315-regulator.h > new file mode 100644 > index 000000000000..38bf365de24d > --- /dev/null > +++ b/include/linux/regulator/mt6315-regulator.h > @@ -0,0 +1,45 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * Copyright (c) 2020 MediaTek Inc. > + */ > + > +#ifndef __LINUX_REGULATOR_MT6315_H > +#define __LINUX_REGULATOR_MT6315_H > + > +#define MT6315_MD 3 > +#define MT6315_CPU 6 > +#define MT6315_GPU 7 MD/CPU/GPU is the application, can we use the part numbers instead? And actually there seem to be 2 MT6315 that could be used for GPU: QP or SP, so "GPU" could be confusing later on if you added support for QP. Does each 5 MT6315 use a unique USID? (PP, QP, RP, SP, TP?) If so, can we use the following instead? #define MT6315_XX 3 // The datasheet I have doesn't specify USID for the part numbers, so I'm not clear if this is RP or TP. #define MT6315_PP 6 #define MT6315_SP 7 > + > +enum { > + MT6315_VBUCK1 = 0, > + MT6315_VBUCK2, > + MT6315_VBUCK3, > + MT6315_VBUCK4, > + MT6315_VBUCK_MAX, > +}; > + > +/* Register */ > +#define MT6315_SWCID_H 0xC > +#define MT6315_TOP2_ELR7 0x139 > +#define MT6315_TOP_TMA_KEY 0x39F > +#define MT6315_TOP_TMA_KEY_H 0x3A0 > +#define MT6315_BUCK_TOP_CON0 0x1440 > +#define MT6315_BUCK_TOP_CON1 0x1443 > +#define MT6315_BUCK_TOP_ELR0 0x1449 > +#define MT6315_BUCK_TOP_ELR2 0x144B > +#define MT6315_BUCK_TOP_ELR4 0x144D > +#define MT6315_BUCK_TOP_ELR6 0x144F > +#define MT6315_VBUCK1_DBG0 0x1499 > +#define MT6315_VBUCK1_DBG4 0x149D > +#define MT6315_VBUCK2_DBG0 0x1519 > +#define MT6315_VBUCK2_DBG4 0x151D > +#define MT6315_VBUCK3_DBG0 0x1599 > +#define MT6315_VBUCK3_DBG4 0x159D > +#define MT6315_VBUCK4_DBG0 0x1619 > +#define MT6315_VBUCK4_DBG4 0x161D > +#define MT6315_BUCK_TOP_4PHASE_ANA_CON42 0x16B1 > + > +#define PROTECTION_KEY_H 0x9C > +#define PROTECTION_KEY 0xEA > + > +#endif /* __LINUX_REGULATOR_MT6315_H */ > -- > 2.18.0 >
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 020a00d6696b..65612ba2734f 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -703,6 +703,16 @@ config REGULATOR_MT6311 This driver supports the control of different power rails of device through regulator interface. +config REGULATOR_MT6315 + tristate "MediaTek MT6315 PMIC" + depends on SPMI + select REGMAP_SPMI + help + Say y here to select this option to enable the power regulator of + MediaTek MT6315 PMIC. + This driver supports the control of different power rails of device + through regulator interface. + config REGULATOR_MT6323 tristate "MediaTek MT6323 PMIC" depends on MFD_MT6397 diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 6ebae516258e..b2f47dd67112 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -87,6 +87,7 @@ obj-$(CONFIG_REGULATOR_MP8859) += mp8859.o obj-$(CONFIG_REGULATOR_MP886X) += mp886x.o obj-$(CONFIG_REGULATOR_MPQ7920) += mpq7920.o obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o +obj-$(CONFIG_REGULATOR_MT6315) += mt6315-regulator.o obj-$(CONFIG_REGULATOR_MT6323) += mt6323-regulator.o obj-$(CONFIG_REGULATOR_MT6358) += mt6358-regulator.o obj-$(CONFIG_REGULATOR_MT6360) += mt6360-regulator.o diff --git a/drivers/regulator/mt6315-regulator.c b/drivers/regulator/mt6315-regulator.c new file mode 100644 index 000000000000..57ef628d48b4 --- /dev/null +++ b/drivers/regulator/mt6315-regulator.c @@ -0,0 +1,298 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// Copyright (c) 2020 MediaTek Inc. + +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/mt6315-regulator.h> +#include <linux/regulator/of_regulator.h> +#include <linux/spmi.h> + +#define MT6315_REG_WIDTH 8 + +#define MT6315_BUCK_MODE_AUTO 0 +#define MT6315_BUCK_MODE_FORCE_PWM 1 +#define MT6315_BUCK_MODE_LP 2 + +struct mt6315_regulator_info { + struct regulator_desc desc; + u32 status_reg; + u32 lp_mode_mask; + u32 lp_mode_shift; +}; + +struct mt_regulator_init_data { + u32 slvid; + u32 modeset_mask[MT6315_VBUCK_MAX]; +}; + +struct mt6315_chip { + struct device *dev; + struct regmap *regmap; +}; + +#define MT_BUCK(_name, _bid, _vsel) \ +[_bid] = { \ + .desc = { \ + .name = _name, \ + .of_match = of_match_ptr(_name), \ + .regulators_node = "regulators", \ + .ops = &mt6315_volt_range_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = _bid, \ + .owner = THIS_MODULE, \ + .n_voltages = 0xbf, \ + .linear_ranges = mt_volt_range1, \ + .n_linear_ranges = ARRAY_SIZE(mt_volt_range1), \ + .vsel_reg = _vsel, \ + .vsel_mask = 0xff, \ + .enable_reg = MT6315_BUCK_TOP_CON0, \ + .enable_mask = BIT(_bid), \ + .of_map_mode = mt6315_map_mode, \ + }, \ + .status_reg = _bid##_DBG4, \ + .lp_mode_mask = BIT(_bid), \ + .lp_mode_shift = _bid, \ +} + +static const struct linear_range mt_volt_range1[] = { + REGULATOR_LINEAR_RANGE(0, 0, 0xbf, 6250), +}; + +static unsigned int mt6315_map_mode(u32 mode) +{ + switch (mode) { + case MT6315_BUCK_MODE_AUTO: + return REGULATOR_MODE_NORMAL; + case MT6315_BUCK_MODE_FORCE_PWM: + return REGULATOR_MODE_FAST; + case MT6315_BUCK_MODE_LP: + return REGULATOR_MODE_IDLE; + default: + return -EINVAL; + } +} + +static unsigned int mt6315_regulator_get_mode(struct regulator_dev *rdev) +{ + struct mt_regulator_init_data *init = rdev_get_drvdata(rdev); + const struct mt6315_regulator_info *info = (struct mt6315_regulator_info *)rdev->desc; + int ret, regval; + u32 modeset_mask; + + modeset_mask = init->modeset_mask[rdev_get_id(rdev)]; + ret = regmap_read(rdev->regmap, MT6315_BUCK_TOP_4PHASE_ANA_CON42, ®val); + if (ret != 0) { + dev_notice(&rdev->dev, "Failed to get mode: %d\n", ret); + return ret; + } + + if ((regval & modeset_mask) == modeset_mask) + return REGULATOR_MODE_FAST; + + ret = regmap_read(rdev->regmap, MT6315_BUCK_TOP_CON1, ®val); + if (ret != 0) { + dev_notice(&rdev->dev, "Failed to get lp mode: %d\n", ret); + return ret; + } + + if (regval & info->lp_mode_mask) + return REGULATOR_MODE_IDLE; + else + return REGULATOR_MODE_NORMAL; +} + +static int mt6315_regulator_set_mode(struct regulator_dev *rdev, + u32 mode) +{ + struct mt_regulator_init_data *init = rdev_get_drvdata(rdev); + const struct mt6315_regulator_info *info = (struct mt6315_regulator_info *)rdev->desc; + int ret, val, curr_mode; + u32 modeset_mask; + + modeset_mask = init->modeset_mask[rdev_get_id(rdev)]; + curr_mode = mt6315_regulator_get_mode(rdev); + switch (mode) { + case REGULATOR_MODE_FAST: + ret = regmap_update_bits(rdev->regmap, + MT6315_BUCK_TOP_4PHASE_ANA_CON42, + modeset_mask, + modeset_mask); + break; + case REGULATOR_MODE_NORMAL: + if (curr_mode == REGULATOR_MODE_FAST) { + ret = regmap_update_bits(rdev->regmap, + MT6315_BUCK_TOP_4PHASE_ANA_CON42, + modeset_mask, + 0); + } else if (curr_mode == REGULATOR_MODE_IDLE) { + ret = regmap_update_bits(rdev->regmap, + MT6315_BUCK_TOP_CON1, + info->lp_mode_mask, + 0); + usleep_range(100, 110); + } + break; + case REGULATOR_MODE_IDLE: + val = MT6315_BUCK_MODE_LP >> 1; + val <<= info->lp_mode_shift; + ret = regmap_update_bits(rdev->regmap, + MT6315_BUCK_TOP_CON1, + info->lp_mode_mask, + val); + break; + default: + ret = -EINVAL; + dev_notice(&rdev->dev, "Not support (%d)\n", mode); + break; + } + + if (ret != 0) { + dev_notice(&rdev->dev, "Failed to set mode: %d\n", ret); + return ret; + } + + return 0; +} + +static int mt6315_get_status(struct regulator_dev *rdev) +{ + const struct mt6315_regulator_info *info = (struct mt6315_regulator_info *)rdev->desc; + int ret; + u32 regval; + + ret = regmap_read(rdev->regmap, info->status_reg, ®val); + if (ret < 0) { + dev_notice(&rdev->dev, "Failed to get enable reg: %d\n", ret); + return ret; + } + + return (regval & BIT(0)) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF; +} + +static const struct regulator_ops mt6315_volt_range_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6315_get_status, + .set_mode = mt6315_regulator_set_mode, + .get_mode = mt6315_regulator_get_mode, +}; + +static const struct mt6315_regulator_info mt6315_regulators[MT6315_VBUCK_MAX] = { + MT_BUCK("vbuck1", MT6315_VBUCK1, MT6315_BUCK_TOP_ELR0), + MT_BUCK("vbuck2", MT6315_VBUCK2, MT6315_BUCK_TOP_ELR2), + MT_BUCK("vbuck3", MT6315_VBUCK3, MT6315_BUCK_TOP_ELR4), + MT_BUCK("vbuck4", MT6315_VBUCK4, MT6315_BUCK_TOP_ELR6), +}; + +static const struct regmap_config mt6315_regmap_config = { + .reg_bits = 16, + .val_bits = 8, + .max_register = 0x16d0, + .fast_io = true, +}; + +static const struct of_device_id mt6315_of_match[] = { + { + .compatible = "mediatek,mt6315-regulator", + }, { + /* sentinel */ + }, +}; +MODULE_DEVICE_TABLE(of, mt6315_of_match); + +static int mt6315_regulator_probe(struct spmi_device *pdev) +{ + struct device *dev = &pdev->dev; + struct regmap *regmap; + struct mt6315_chip *chip; + struct mt_regulator_init_data *init_data; + struct regulator_config config = {}; + struct regulator_dev *rdev; + int i; + + regmap = devm_regmap_init_spmi_ext(pdev, &mt6315_regmap_config); + if (!regmap) + return -ENODEV; + + chip = devm_kzalloc(dev, sizeof(struct mt6315_chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + init_data = devm_kzalloc(dev, sizeof(struct mt_regulator_init_data), GFP_KERNEL); + if (!init_data) + return -ENOMEM; + + chip->dev = dev; + chip->regmap = regmap; + dev_set_drvdata(dev, chip); + + config.dev = dev; + config.regmap = regmap; + for (i = MT6315_VBUCK1; i < MT6315_VBUCK_MAX; i++) { + init_data->modeset_mask[i] = 1 << (i - 1); + config.driver_data = init_data; + rdev = devm_regulator_register(dev, &mt6315_regulators[i].desc, &config); + if (IS_ERR(rdev)) { + dev_notice(dev, "Failed to register %s\n", mt6315_regulators[i].desc.name); + continue; + } + } + + init_data->slvid = pdev->usid; + switch (init_data->slvid) { + case MT6315_CPU: + init_data->modeset_mask[MT6315_VBUCK1] = 0xB; + break; + case MT6315_GPU: + case MT6315_MD: + init_data->modeset_mask[MT6315_VBUCK1] = 0x3; + break; + default: + break; + } + + return 0; +} + +static void mt6315_regulator_shutdown(struct spmi_device *pdev) +{ + struct mt6315_chip *chip = dev_get_drvdata(&pdev->dev); + int ret = 0; + + ret |= regmap_write(chip->regmap, MT6315_TOP_TMA_KEY_H, PROTECTION_KEY_H); + ret |= regmap_write(chip->regmap, MT6315_TOP_TMA_KEY, PROTECTION_KEY); + ret |= regmap_update_bits(chip->regmap, MT6315_TOP2_ELR7, 1, 1); + ret |= regmap_write(chip->regmap, MT6315_TOP_TMA_KEY, 0); + ret |= regmap_write(chip->regmap, MT6315_TOP_TMA_KEY_H, 0); + if (ret < 0) + dev_notice(&pdev->dev, "[%#x] Failed to enable power off sequence. %d\n", + pdev->usid, ret); +} + +static struct spmi_driver mt6315_regulator_driver = { + .driver = { + .name = "mt6315-regulator", + .of_match_table = mt6315_of_match, + }, + .probe = mt6315_regulator_probe, + .shutdown = mt6315_regulator_shutdown, +}; + +module_spmi_driver(mt6315_regulator_driver); + +MODULE_AUTHOR("Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>"); +MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6315 PMIC"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/regulator/mt6315-regulator.h b/include/linux/regulator/mt6315-regulator.h new file mode 100644 index 000000000000..38bf365de24d --- /dev/null +++ b/include/linux/regulator/mt6315-regulator.h @@ -0,0 +1,45 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2020 MediaTek Inc. + */ + +#ifndef __LINUX_REGULATOR_MT6315_H +#define __LINUX_REGULATOR_MT6315_H + +#define MT6315_MD 3 +#define MT6315_CPU 6 +#define MT6315_GPU 7 + +enum { + MT6315_VBUCK1 = 0, + MT6315_VBUCK2, + MT6315_VBUCK3, + MT6315_VBUCK4, + MT6315_VBUCK_MAX, +}; + +/* Register */ +#define MT6315_SWCID_H 0xC +#define MT6315_TOP2_ELR7 0x139 +#define MT6315_TOP_TMA_KEY 0x39F +#define MT6315_TOP_TMA_KEY_H 0x3A0 +#define MT6315_BUCK_TOP_CON0 0x1440 +#define MT6315_BUCK_TOP_CON1 0x1443 +#define MT6315_BUCK_TOP_ELR0 0x1449 +#define MT6315_BUCK_TOP_ELR2 0x144B +#define MT6315_BUCK_TOP_ELR4 0x144D +#define MT6315_BUCK_TOP_ELR6 0x144F +#define MT6315_VBUCK1_DBG0 0x1499 +#define MT6315_VBUCK1_DBG4 0x149D +#define MT6315_VBUCK2_DBG0 0x1519 +#define MT6315_VBUCK2_DBG4 0x151D +#define MT6315_VBUCK3_DBG0 0x1599 +#define MT6315_VBUCK3_DBG4 0x159D +#define MT6315_VBUCK4_DBG0 0x1619 +#define MT6315_VBUCK4_DBG4 0x161D +#define MT6315_BUCK_TOP_4PHASE_ANA_CON42 0x16B1 + +#define PROTECTION_KEY_H 0x9C +#define PROTECTION_KEY 0xEA + +#endif /* __LINUX_REGULATOR_MT6315_H */
The MT6315 is a regulator found on boards based on MediaTek MT8192 and probably other SoCs. It connects as a slave to SoC using SPMI. Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com> --- drivers/regulator/Kconfig | 10 + drivers/regulator/Makefile | 1 + drivers/regulator/mt6315-regulator.c | 298 +++++++++++++++++++++ include/linux/regulator/mt6315-regulator.h | 45 ++++ 4 files changed, 354 insertions(+) create mode 100644 drivers/regulator/mt6315-regulator.c create mode 100644 include/linux/regulator/mt6315-regulator.h