diff mbox series

phy: qcom-qmp: remove redundant error of clock bulk

Message ID 1617937630-24832-1-git-send-email-chunfeng.yun@mediatek.com (mailing list archive)
State New
Headers show
Series phy: qcom-qmp: remove redundant error of clock bulk | expand

Commit Message

Chunfeng Yun April 9, 2021, 3:07 a.m. UTC
There is error log in clk_bulk_prepare/enable()

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
 drivers/phy/qualcomm/phy-qcom-qmp.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

Comments

Bjorn Andersson April 12, 2021, 11:53 p.m. UTC | #1
On Thu 08 Apr 22:07 CDT 2021, Chunfeng Yun wrote:

> There is error log in clk_bulk_prepare/enable()
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp.c | 8 ++------
>  1 file changed, 2 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
> index 9cdebe7..f14b8be 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
> @@ -3598,10 +3598,8 @@ static int qcom_qmp_phy_com_init(struct qmp_phy *qphy)
>  	}
>  
>  	ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
> -	if (ret) {
> -		dev_err(qmp->dev, "failed to enable clks, err=%d\n", ret);
> +	if (ret)
>  		goto err_rst;
> -	}
>  
>  	if (cfg->has_phy_dp_com_ctrl) {
>  		qphy_setbits(dp_com, QPHY_V3_DP_COM_POWER_DOWN_CTRL,
> @@ -4035,10 +4033,8 @@ static int __maybe_unused qcom_qmp_phy_runtime_resume(struct device *dev)
>  	}
>  
>  	ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
> -	if (ret) {
> -		dev_err(qmp->dev, "failed to enable clks, err=%d\n", ret);
> +	if (ret)
>  		return ret;
> -	}
>  
>  	ret = clk_prepare_enable(qphy->pipe_clk);
>  	if (ret) {
> -- 
> 1.8.1.1.dirty
>
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 9cdebe7..f14b8be 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -3598,10 +3598,8 @@  static int qcom_qmp_phy_com_init(struct qmp_phy *qphy)
 	}
 
 	ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
-	if (ret) {
-		dev_err(qmp->dev, "failed to enable clks, err=%d\n", ret);
+	if (ret)
 		goto err_rst;
-	}
 
 	if (cfg->has_phy_dp_com_ctrl) {
 		qphy_setbits(dp_com, QPHY_V3_DP_COM_POWER_DOWN_CTRL,
@@ -4035,10 +4033,8 @@  static int __maybe_unused qcom_qmp_phy_runtime_resume(struct device *dev)
 	}
 
 	ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
-	if (ret) {
-		dev_err(qmp->dev, "failed to enable clks, err=%d\n", ret);
+	if (ret)
 		return ret;
-	}
 
 	ret = clk_prepare_enable(qphy->pipe_clk);
 	if (ret) {