diff mbox

[v6,1/3] doc: dt: add documentation for Mediatek spi-nor controller

Message ID 20151111203823.GJ12143@google.com (mailing list archive)
State New, archived
Headers show

Commit Message

Brian Norris Nov. 11, 2015, 8:38 p.m. UTC
On Fri, Nov 06, 2015 at 11:48:07PM +0800, Bayi Cheng wrote:
> Add device tree binding documentation for serial flash with
> Mediatek serial flash controller
> 
> Signed-off-by: Bayi Cheng <bayi.cheng@mediatek.com>
> ---

Applied to l2-mtd.git/next (for 4.5). This will show up in
linux-next.git after the merge window.

Also squashed in a small diff (below), to fix up some language issues
and to refer the reader to the jedec,spi-nor.txt document.

>  .../devicetree/bindings/mtd/mtk-quadspi.txt        | 41 ++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
> 
> diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
> new file mode 100644
> index 0000000..866b492
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
> @@ -0,0 +1,41 @@
> +* MTD SPI nor driver for MTK MT81xx (and similar) serial flash controller

The DT binding document shouldn't be talking about software (i.e.,
shouldn't be talking about "drivers").

> +
> +Required properties:
> +- compatible: 	  should be "mediatek,mt8173-nor";
> +- reg: 		  physical base address and length of the controller's register
> +- clocks: 	  the phandle of the clock needed by the nor controller
> +- clock-names: 	  the name of the clocks
> +		  the clocks needed "spi" and "sf". "spi" is used for spi bus,
> +		  and "sf" is used for controller, these are the clocks witch
> +		  hardware needs to enabling nor flash and nor flash controller.
> +		  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
> +- #address-cells: should be <1>
> +- #size-cells:	  should be <0>
> +
> +The SPI Flash must be a child of the nor_flash node and must have a
> +compatible property.
> +
> +Required properties:
> +- compatible:	  May include a device-specific string consisting of the manufacturer
> +		  and name of the chip. Must also include "jedec,spi-nor" for any
> +		  SPI NOR flash that can be identified by the JEDEC READ ID opcode (0x9F).
> +- reg :		  Chip-Select number
> +
> +Example:
> +
> +nor_flash: spi@1100d000 {
> +	compatible = "mediatek,mt8173-nor";
> +	reg = <0 0x1100d000 0 0xe0>;
> +	clocks = <&pericfg CLK_PERI_SPI>,
> +		 <&topckgen CLK_TOP_SPINFI_IFR_SEL>;
> +	clock-names = "spi", "sf";
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	status = "disabled";
> +
> +	flash@0 {
> +		compatible = "jedec,spi-nor";
> +		reg = <0>;
> +	};
> +};
> +

Comments

Bayi Cheng Nov. 13, 2015, 7:20 a.m. UTC | #1
On Wed, 2015-11-11 at 12:38 -0800, Brian Norris wrote:
> On Fri, Nov 06, 2015 at 11:48:07PM +0800, Bayi Cheng wrote:
> > Add device tree binding documentation for serial flash with
> > Mediatek serial flash controller
> > 
> > Signed-off-by: Bayi Cheng <bayi.cheng@mediatek.com>
> > ---
> 
> Applied to l2-mtd.git/next (for 4.5). This will show up in
> linux-next.git after the merge window.
> 
> Also squashed in a small diff (below), to fix up some language issues
> and to refer the reader to the jedec,spi-nor.txt document.
> 

OK, I will fix it in next patch!

> >  .../devicetree/bindings/mtd/mtk-quadspi.txt        | 41 ++++++++++++++++++++++
> >  1 file changed, 41 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
> > new file mode 100644
> > index 0000000..866b492
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
> > @@ -0,0 +1,41 @@
> > +* MTD SPI nor driver for MTK MT81xx (and similar) serial flash controller
> 
> The DT binding document shouldn't be talking about software (i.e.,
> shouldn't be talking about "drivers").
> 

OK, I will fix it.

> > +
> > +Required properties:
> > +- compatible: 	  should be "mediatek,mt8173-nor";
> > +- reg: 		  physical base address and length of the controller's register
> > +- clocks: 	  the phandle of the clock needed by the nor controller
> > +- clock-names: 	  the name of the clocks
> > +		  the clocks needed "spi" and "sf". "spi" is used for spi bus,
> > +		  and "sf" is used for controller, these are the clocks witch
> > +		  hardware needs to enabling nor flash and nor flash controller.
> > +		  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
> > +- #address-cells: should be <1>
> > +- #size-cells:	  should be <0>
> > +
> > +The SPI Flash must be a child of the nor_flash node and must have a
> > +compatible property.
> > +
> > +Required properties:
> > +- compatible:	  May include a device-specific string consisting of the manufacturer
> > +		  and name of the chip. Must also include "jedec,spi-nor" for any
> > +		  SPI NOR flash that can be identified by the JEDEC READ ID opcode (0x9F).
> > +- reg :		  Chip-Select number
> > +
> > +Example:
> > +
> > +nor_flash: spi@1100d000 {
> > +	compatible = "mediatek,mt8173-nor";
> > +	reg = <0 0x1100d000 0 0xe0>;
> > +	clocks = <&pericfg CLK_PERI_SPI>,
> > +		 <&topckgen CLK_TOP_SPINFI_IFR_SEL>;
> > +	clock-names = "spi", "sf";
> > +	#address-cells = <1>;
> > +	#size-cells = <0>;
> > +	status = "disabled";
> > +
> > +	flash@0 {
> > +		compatible = "jedec,spi-nor";
> > +		reg = <0>;
> > +	};
> > +};
> > +
> 
> diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
> index 866b492c38d2..fb314f09861b 100644
> --- a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
> +++ b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
> @@ -1,19 +1,19 @@
> -* MTD SPI nor driver for MTK MT81xx (and similar) serial flash controller
> +* Serial NOR flash controller for MTK MT81xx (and similar)
>  
>  Required properties:
>  - compatible: 	  should be "mediatek,mt8173-nor";
>  - reg: 		  physical base address and length of the controller's register
> -- clocks: 	  the phandle of the clock needed by the nor controller
> -- clock-names: 	  the name of the clocks
> -		  the clocks needed "spi" and "sf". "spi" is used for spi bus,
> +- clocks: 	  the phandle of the clocks needed by the nor controller
> +- clock-names: 	  the names of the clocks
> +		  the clocks should be named "spi" and "sf". "spi" is used for spi bus,
>  		  and "sf" is used for controller, these are the clocks witch
>  		  hardware needs to enabling nor flash and nor flash controller.
>  		  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
>  - #address-cells: should be <1>
>  - #size-cells:	  should be <0>
>  
> -The SPI Flash must be a child of the nor_flash node and must have a
> -compatible property.
> +The SPI flash must be a child of the nor_flash node and must have a
> +compatible property. Also see jedec,spi-nor.txt.
>  
>  Required properties:
>  - compatible:	  May include a device-specific string consisting of the manufacturer

Thanks for your instruction! and I will fix it in the next patch!
Brian Norris Nov. 13, 2015, 7:13 p.m. UTC | #2
On Fri, Nov 13, 2015 at 03:20:45PM +0800, Bayi Cheng wrote:
> On Wed, 2015-11-11 at 12:38 -0800, Brian Norris wrote:
> > Applied to l2-mtd.git/next (for 4.5). This will show up in
> > linux-next.git after the merge window.
> > 
> > Also squashed in a small diff (below), to fix up some language issues
> > and to refer the reader to the jedec,spi-nor.txt document.
> > 
> 
> OK, I will fix it in next patch!

No, you don't need to send another patch. I already merged just this one
(the DT documentation) with my own small fixes, with a plan to go into
4.5. You only need to send another version of patch 2 (the driver).

During the merge window, I'm stashing changes in l2-mtd.git's 'next'
branch, so we can keep stuff that's going to 4.5 separate from stuff
thats getting merged to 4.4 right now. You can see it here for now:

http://git.infradead.org/l2-mtd.git/shortlog/refs/heads/next

After the merge window closes (probably on Sunday), I'll bring this into
+master.

Regards,
Brian
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
index 866b492c38d2..fb314f09861b 100644
--- a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
+++ b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt
@@ -1,19 +1,19 @@ 
-* MTD SPI nor driver for MTK MT81xx (and similar) serial flash controller
+* Serial NOR flash controller for MTK MT81xx (and similar)
 
 Required properties:
 - compatible: 	  should be "mediatek,mt8173-nor";
 - reg: 		  physical base address and length of the controller's register
-- clocks: 	  the phandle of the clock needed by the nor controller
-- clock-names: 	  the name of the clocks
-		  the clocks needed "spi" and "sf". "spi" is used for spi bus,
+- clocks: 	  the phandle of the clocks needed by the nor controller
+- clock-names: 	  the names of the clocks
+		  the clocks should be named "spi" and "sf". "spi" is used for spi bus,
 		  and "sf" is used for controller, these are the clocks witch
 		  hardware needs to enabling nor flash and nor flash controller.
 		  See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
 - #address-cells: should be <1>
 - #size-cells:	  should be <0>
 
-The SPI Flash must be a child of the nor_flash node and must have a
-compatible property.
+The SPI flash must be a child of the nor_flash node and must have a
+compatible property. Also see jedec,spi-nor.txt.
 
 Required properties:
 - compatible:	  May include a device-specific string consisting of the manufacturer