@@ -915,20 +915,19 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
}
/**
- * s3c2410_nand_update_chip - post probe update
- * @info: The controller instance.
- * @nmtd: The driver version of the MTD instance.
+ * s3c2410_nand_attach_chip - Init the ECC engine after NAND scan
+ * @chip: The NAND chip
*
- * This routine is called after the chip probe has successfully completed
- * and the relevant per-chip information updated. This call ensure that
+ * This hook is called by the core after the identification of the NAND chip,
+ * once the relevant per-chip information is up to date.. This call ensure that
* we update the internal state accordingly.
*
* The internal state is currently limited to the ECC state information.
*/
-static int s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
- struct s3c2410_nand_mtd *nmtd)
+static int s3c2410_nand_attach_chip(struct nand_chip *chip)
{
- struct nand_chip *chip = &nmtd->chip;
+ struct mtd_info *mtd = nand_to_mtd(chip);
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
switch (chip->ecc.mode) {
@@ -1161,15 +1160,8 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
mtd->dev.parent = &pdev->dev;
s3c2410_nand_init_chip(info, nmtd, sets);
- err = nand_scan_ident(mtd, (sets) ? sets->nr_chips : 1, NULL);
- if (err)
- goto exit_error;
-
- err = s3c2410_nand_update_chip(info, nmtd);
- if (err < 0)
- goto exit_error;
-
- err = nand_scan_tail(mtd);
+ nmtd->chip.controller->attach_chip = s3c2410_nand_attach_chip;
+ err = nand_scan(mtd, sets ? sets->nr_chips : 1);
if (err)
goto exit_error;
Two helpers have been added to the core to make ECC-related configuration between the detection phase and the final NAND scan. Use these hooks and convert the driver to just use nand_scan() instead of both nand_scan_ident() and nand_scan_tail(). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- drivers/mtd/nand/raw/s3c2410.c | 26 +++++++++----------------- 1 file changed, 9 insertions(+), 17 deletions(-)