diff mbox series

[v2,5/7] power: reset: add driver for mt6323 poweroff

Message ID 20190703164822.17924-6-frank-w@public-files.de (mailing list archive)
State New, archived
Headers show
Series implement poweroff for mt6323/6397 | expand

Commit Message

Frank Wunderlich July 3, 2019, 4:48 p.m. UTC
From: Josef Friedl <josef.friedl@speed.at>

Suggested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
 drivers/power/reset/Kconfig           | 10 +++
 drivers/power/reset/Makefile          |  1 +
 drivers/power/reset/mt6323-poweroff.c | 97 +++++++++++++++++++++++++++
 include/linux/mfd/mt6397/core.h       |  2 +
 4 files changed, 110 insertions(+)
 create mode 100644 drivers/power/reset/mt6323-poweroff.c

--
2.17.1

Comments

Matthias Brugger July 4, 2019, 9:15 a.m. UTC | #1
On 03/07/2019 18:48, Frank Wunderlich wrote:
> From: Josef Friedl <josef.friedl@speed.at>
> 
> Suggested-by: Frank Wunderlich <frank-w@public-files.de>
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>

Why is there a Signed-off-by from Josef for this patch but not for the others?
Ran Bi July 4, 2019, 10:03 a.m. UTC | #2
On Wed, 2019-07-03 at 18:48 +0200, Frank Wunderlich wrote:
> From: Josef Friedl <josef.friedl@speed.at>
> 
> Suggested-by: Frank Wunderlich <frank-w@public-files.de>
> Signed-off-by: Josef Friedl <josef.friedl@speed.at>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
>  drivers/power/reset/Kconfig           | 10 +++
>  drivers/power/reset/Makefile          |  1 +
>  drivers/power/reset/mt6323-poweroff.c | 97 +++++++++++++++++++++++++++
>  include/linux/mfd/mt6397/core.h       |  2 +
>  4 files changed, 110 insertions(+)
>  create mode 100644 drivers/power/reset/mt6323-poweroff.c
> 
> --
> 2.17.1
> 
> diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
> index 980951dff834..492678e22088 100644
> --- a/drivers/power/reset/Kconfig
> +++ b/drivers/power/reset/Kconfig
> @@ -140,6 +140,16 @@ config POWER_RESET_LTC2952
>  	  This driver supports an external powerdown trigger and board power
>  	  down via the LTC2952. Bindings are made in the device tree.
> 
> +config POWER_RESET_MT6323
> +       bool "MediaTek MT6323 power-off driver"
> +       depends on MFD_MT6397
> +       help
> +         The power-off driver is responsible for externally shutdown down
> +         the power of a remote MediaTek SoC MT6323 is connected to through
> +         controlling a tiny circuit BBPU inside MT6323 RTC.
> +
> +         Say Y if you have a board where MT6323 could be found.
> +
>  config POWER_RESET_QNAP
>  	bool "QNAP power-off driver"
>  	depends on OF_GPIO && PLAT_ORION
> diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
> index 0aebee954ac1..94eaceb01d66 100644
> --- a/drivers/power/reset/Makefile
> +++ b/drivers/power/reset/Makefile
> @@ -11,6 +11,7 @@ obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
>  obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
>  obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
>  obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
> +obj-$(CONFIG_POWER_RESET_MT6323) += mt6323-poweroff.o
>  obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
>  obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
>  obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o
> diff --git a/drivers/power/reset/mt6323-poweroff.c b/drivers/power/reset/mt6323-poweroff.c
> new file mode 100644
> index 000000000000..1caf43d9e46d
> --- /dev/null
> +++ b/drivers/power/reset/mt6323-poweroff.c
> @@ -0,0 +1,97 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Power off through MediaTek PMIC
> + *
> + * Copyright (C) 2018 MediaTek Inc.
> + *
> + * Author: Sean Wang <sean.wang@mediatek.com>
> + *
> + */
> +
> +#include <linux/err.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/mfd/mt6397/core.h>
> +#include <linux/mfd/mt6397/rtc.h>
> +
> +struct mt6323_pwrc {
> +	struct device *dev;
> +	struct regmap *regmap;
> +	u32 base;
> +};
> +
> +static struct mt6323_pwrc *mt_pwrc;
> +
> +static void mt6323_do_pwroff(void)
> +{
> +	struct mt6323_pwrc *pwrc = mt_pwrc;
> +	unsigned int val;
> +	int ret;
> +
> +	regmap_write(pwrc->regmap, pwrc->base + RTC_BBPU, RTC_BBPU_KEY);
> +	regmap_write(pwrc->regmap, pwrc->base + RTC_WRTGR, 1);
> +
> +	ret = regmap_read_poll_timeout(pwrc->regmap,
> +					pwrc->base + RTC_BBPU, val,
> +					!(val & RTC_BBPU_CBUSY),
> +					MTK_RTC_POLL_DELAY_US,
> +					MTK_RTC_POLL_TIMEOUT);
> +	if (ret)
> +		dev_err(pwrc->dev, "failed to write BBPU: %d\n", ret);
> +
> +	/* Wait some time until system down, otherwise, notice with a warn */
> +	mdelay(1000);
> +
> +	WARN_ONCE(1, "Unable to power off system\n");
> +}
> +
> +static int mt6323_pwrc_probe(struct platform_device *pdev)
> +{
> +	struct mt6397_chip *mt6397_chip = dev_get_drvdata(pdev->dev.parent);
> +	struct mt6323_pwrc *pwrc;
> +	struct resource *res;
> +
> +	pwrc = devm_kzalloc(&pdev->dev, sizeof(*pwrc), GFP_KERNEL);
> +	if (!pwrc)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	pwrc->base = res->start;
> +	pwrc->regmap = mt6397_chip->regmap;
> +	pwrc->dev = &pdev->dev;
> +	mt_pwrc = pwrc;
> +
> +	pm_power_off = &mt6323_do_pwroff;

We had implement MT8173 poweroff function in arm-trusted-firmware's PSCI
plat_system_off() function. MT8173 SoC is using PMIC MT6397. (Ref:
https://github.com/ARM-software/arm-trusted-firmware/blob/master/plat/mediatek/mt8173/plat_pm.c and https://github.com/ARM-software/arm-trusted-firmware/blob/master/plat/mediatek/mt8173/drivers/rtc) Do you think it's better to implement poweroff function into arm-trusted-firmware compared to hijack pm_poweroff() function in Kernel? Right now, we are doing the upstream of other PMIC chip like MT6358's poweroff function in arm-trusted-firmware too.

> +
> +	return 0;
> +}
> +
> +static int mt6323_pwrc_remove(struct platform_device *pdev)
> +{
> +	if (pm_power_off == &mt6323_do_pwroff)
> +		pm_power_off = NULL;
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id mt6323_pwrc_dt_match[] = {
> +	{ .compatible = "mediatek,mt6323-pwrc" },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, mt6323_pwrc_dt_match);
> +
> +static struct platform_driver mt6323_pwrc_driver = {
> +	.probe          = mt6323_pwrc_probe,
> +	.remove         = mt6323_pwrc_remove,
> +	.driver         = {
> +		.name   = "mt6323-pwrc",
> +		.of_match_table = mt6323_pwrc_dt_match,
> +	},
> +};
> +
> +module_platform_driver(mt6323_pwrc_driver);
> +
> +MODULE_DESCRIPTION("Poweroff driver for MT6323 PMIC");
> +MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/mfd/mt6397/core.h b/include/linux/mfd/mt6397/core.h
> index 25a95e72179b..652da61e3711 100644
> --- a/include/linux/mfd/mt6397/core.h
> +++ b/include/linux/mfd/mt6397/core.h
> @@ -7,6 +7,8 @@
>  #ifndef __MFD_MT6397_CORE_H__
>  #define __MFD_MT6397_CORE_H__
> 
> +#include <linux/mutex.h>
> +
>  enum mt6397_irq_numbers {
>  	MT6397_IRQ_SPKL_AB = 0,
Frank Wunderlich July 4, 2019, 10:55 a.m. UTC | #3
I have splitted josefs patchseries (v1) without modifying the code. So original commits have the signed-off and the new ones not.

 Matthias Brugger:
>Why is there a Signed-off-by from Josef for this patch but not for the
>others?
Frank Wunderlich July 4, 2019, 11:06 a.m. UTC | #4
> Gesendet: Donnerstag, 04. Juli 2019 um 12:03 Uhr
> Von: "Ran Bi" <ran.bi@mediatek.com>

> We had implement MT8173 poweroff function in arm-trusted-firmware's PSCI
> plat_system_off() function. MT8173 SoC is using PMIC MT6397. (Ref:
> https://github.com/ARM-software/arm-trusted-firmware/blob/master/plat/mediatek/mt8173/plat_pm.c and https://github.com/ARM-software/arm-trusted-firmware/blob/master/plat/mediatek/mt8173/drivers/rtc) Do you think it's better to implement poweroff function into arm-trusted-firmware compared to hijack pm_poweroff() function in Kernel? Right now, we are doing the upstream of other PMIC chip like MT6358's poweroff function in arm-trusted-firmware too.

ATF imho only used for arm64, my board is 32bit armv7 and i (currently) do not boot up with ATF

regards Frank
diff mbox series

Patch

diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index 980951dff834..492678e22088 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -140,6 +140,16 @@  config POWER_RESET_LTC2952
 	  This driver supports an external powerdown trigger and board power
 	  down via the LTC2952. Bindings are made in the device tree.

+config POWER_RESET_MT6323
+       bool "MediaTek MT6323 power-off driver"
+       depends on MFD_MT6397
+       help
+         The power-off driver is responsible for externally shutdown down
+         the power of a remote MediaTek SoC MT6323 is connected to through
+         controlling a tiny circuit BBPU inside MT6323 RTC.
+
+         Say Y if you have a board where MT6323 could be found.
+
 config POWER_RESET_QNAP
 	bool "QNAP power-off driver"
 	depends on OF_GPIO && PLAT_ORION
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index 0aebee954ac1..94eaceb01d66 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -11,6 +11,7 @@  obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
 obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
 obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
 obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
+obj-$(CONFIG_POWER_RESET_MT6323) += mt6323-poweroff.o
 obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
 obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
 obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o
diff --git a/drivers/power/reset/mt6323-poweroff.c b/drivers/power/reset/mt6323-poweroff.c
new file mode 100644
index 000000000000..1caf43d9e46d
--- /dev/null
+++ b/drivers/power/reset/mt6323-poweroff.c
@@ -0,0 +1,97 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Power off through MediaTek PMIC
+ *
+ * Copyright (C) 2018 MediaTek Inc.
+ *
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/mt6397/core.h>
+#include <linux/mfd/mt6397/rtc.h>
+
+struct mt6323_pwrc {
+	struct device *dev;
+	struct regmap *regmap;
+	u32 base;
+};
+
+static struct mt6323_pwrc *mt_pwrc;
+
+static void mt6323_do_pwroff(void)
+{
+	struct mt6323_pwrc *pwrc = mt_pwrc;
+	unsigned int val;
+	int ret;
+
+	regmap_write(pwrc->regmap, pwrc->base + RTC_BBPU, RTC_BBPU_KEY);
+	regmap_write(pwrc->regmap, pwrc->base + RTC_WRTGR, 1);
+
+	ret = regmap_read_poll_timeout(pwrc->regmap,
+					pwrc->base + RTC_BBPU, val,
+					!(val & RTC_BBPU_CBUSY),
+					MTK_RTC_POLL_DELAY_US,
+					MTK_RTC_POLL_TIMEOUT);
+	if (ret)
+		dev_err(pwrc->dev, "failed to write BBPU: %d\n", ret);
+
+	/* Wait some time until system down, otherwise, notice with a warn */
+	mdelay(1000);
+
+	WARN_ONCE(1, "Unable to power off system\n");
+}
+
+static int mt6323_pwrc_probe(struct platform_device *pdev)
+{
+	struct mt6397_chip *mt6397_chip = dev_get_drvdata(pdev->dev.parent);
+	struct mt6323_pwrc *pwrc;
+	struct resource *res;
+
+	pwrc = devm_kzalloc(&pdev->dev, sizeof(*pwrc), GFP_KERNEL);
+	if (!pwrc)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	pwrc->base = res->start;
+	pwrc->regmap = mt6397_chip->regmap;
+	pwrc->dev = &pdev->dev;
+	mt_pwrc = pwrc;
+
+	pm_power_off = &mt6323_do_pwroff;
+
+	return 0;
+}
+
+static int mt6323_pwrc_remove(struct platform_device *pdev)
+{
+	if (pm_power_off == &mt6323_do_pwroff)
+		pm_power_off = NULL;
+
+	return 0;
+}
+
+static const struct of_device_id mt6323_pwrc_dt_match[] = {
+	{ .compatible = "mediatek,mt6323-pwrc" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mt6323_pwrc_dt_match);
+
+static struct platform_driver mt6323_pwrc_driver = {
+	.probe          = mt6323_pwrc_probe,
+	.remove         = mt6323_pwrc_remove,
+	.driver         = {
+		.name   = "mt6323-pwrc",
+		.of_match_table = mt6323_pwrc_dt_match,
+	},
+};
+
+module_platform_driver(mt6323_pwrc_driver);
+
+MODULE_DESCRIPTION("Poweroff driver for MT6323 PMIC");
+MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/mt6397/core.h b/include/linux/mfd/mt6397/core.h
index 25a95e72179b..652da61e3711 100644
--- a/include/linux/mfd/mt6397/core.h
+++ b/include/linux/mfd/mt6397/core.h
@@ -7,6 +7,8 @@ 
 #ifndef __MFD_MT6397_CORE_H__
 #define __MFD_MT6397_CORE_H__

+#include <linux/mutex.h>
+
 enum mt6397_irq_numbers {
 	MT6397_IRQ_SPKL_AB = 0,
 	MT6397_IRQ_SPKR_AB,