From patchwork Wed Jul 24 19:25:47 2019 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Ren=C3=A9_van_Dorst?= X-Patchwork-Id: 11057537 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 2ECB21398 for ; Wed, 24 Jul 2019 19:26:29 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id 1E152288AD for ; Wed, 24 Jul 2019 19:26:29 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id 12255288C4; Wed, 24 Jul 2019 19:26:29 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-5.2 required=2.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,MAILING_LIST_MULTI,RCVD_IN_DNSWL_MED autolearn=ham version=3.3.1 Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.wl.linuxfoundation.org (Postfix) with ESMTPS id 1F5BC2890E for ; Wed, 24 Jul 2019 19:26:28 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:Cc:List-Subscribe:List-Help:List-Post: List-Archive:List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To: Message-Id:Date:Subject:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=F0J3RlPo5gm48Y6Gkv8RULvA1sSitLWFSBsq7QBvjf4=; b=hYq5sAX81io/lA e8GJ0SysmqFhMclvTmm6NuKgM+mDFh/S0RdGTuMfnOHWB8Tggw+U7+yi1dM0/OlO2y5Xul0nNRl1s OTm16+FQMwFkuFQOR2f28QpEpj5JB6rGLQ51KBhtJzAEgBavKmKpSEtCo5iTHrge34lqRlfZAB6Ow ggklVJ7bMBieUcMy2szNQgqbimSXNf4P9KKEEfSkpz8H0sENrGiFWVulM793FOq2ypHV6CH20yR5E k9UZZWKAvyT7AQkcPMglKZm7NGeJ6XayQS4YOdINBDls9W2TxEroBP0fxZaGJ/swS52ykuyIL7E0N p1GcYpPzg1RiXlfEtQMg==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.92 #3 (Red Hat Linux)) id 1hqMuB-0007lC-Ps; Wed, 24 Jul 2019 19:26:27 +0000 Received: from mx.0dd.nl ([2a04:52c0:101:921::25]) by bombadil.infradead.org with esmtp (Exim 4.92 #3 (Red Hat Linux)) id 1hqMu4-0007ee-9X for linux-mediatek@lists.infradead.org; Wed, 24 Jul 2019 19:26:23 +0000 Received: from mail.vdorst.com (mail.vdorst.com [IPv6:fd01::250]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mx.0dd.nl (Postfix) with ESMTPS id 7E7E45FEA6; Wed, 24 Jul 2019 21:26:19 +0200 (CEST) Authentication-Results: mx.0dd.nl; dkim=pass (2048-bit key) header.d=vdorst.com header.i=@vdorst.com header.b="jcreP32V"; dkim-atps=neutral Received: from pc-rene.vdorst.com (pc-rene.vdorst.com [192.168.2.125]) by mail.vdorst.com (Postfix) with ESMTPA id F3BA21D25D3A; Wed, 24 Jul 2019 21:26:18 +0200 (CEST) DKIM-Filter: OpenDKIM Filter v2.11.0 mail.vdorst.com F3BA21D25D3A DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=vdorst.com; s=default; t=1563996379; bh=v42mfgYB8z+fNhAakpPFeHoGNCreOow3Pqb2kVWpTUs=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=jcreP32VhADIPXEbcBs6R2Q81dI2Kow6/e3AAzoiCJx2LTniAh+ib0JV+pvIt2Mdp mb4/DNNfsmsFMXZnKWvC/+L9ONNwKT7Mm5c//VVwUnWfM3tNbGvzNmxPzYX4C0TfFp G0SD2uL9W5CqlfZVVZcZZq8FygEQ29kEDb+t7O4GJ4l2W9BSsrw3rzxpdUcHl4+Po5 yw/SSLupSlAb8+0/mNiUWG//6uDbKFN/slrumzWLCz7PyXyIzdorpQLgctSMtgAV7P +Sp6/IWgvZvi4JpX2rVBjidd/v1w/XT/S4gGVZYzToU/++KE9PzDbi+0k7tcddkuH4 l5B85W/+PnCog== From: =?utf-8?q?Ren=C3=A9_van_Dorst?= To: netdev@vger.kernel.org Subject: [PATCH net-next 1/3] net: dsa: mt7530: Convert to PHYLINK API Date: Wed, 24 Jul 2019 21:25:47 +0200 Message-Id: <20190724192549.24615-2-opensource@vdorst.com> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20190724192549.24615-1-opensource@vdorst.com> References: <20190724192549.24615-1-opensource@vdorst.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20190724_122620_608392_B56880D7 X-CRM114-Status: GOOD ( 17.54 ) X-BeenThere: linux-mediatek@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: andrew@lunn.ch, f.fainelli@gmail.com, frank-w@public-files.de, sean.wang@mediatek.com, linux@armlinux.org.uk, vivien.didelot@gmail.com, =?utf-8?q?Ren=C3=A9_van_Dorst?= , devicetree@vger.kernel.org, robh+dt@kernel.org, linux-mediatek@lists.infradead.org, john@phrozen.org, matthias.bgg@gmail.com, linux-mips@vger.kernel.org, davem@davemloft.net Sender: "Linux-mediatek" Errors-To: linux-mediatek-bounces+patchwork-linux-mediatek=patchwork.kernel.org@lists.infradead.org X-Virus-Scanned: ClamAV using ClamSMTP Convert mt7530 to PHYLINK API Signed-off-by: René van Dorst rfc->v1: * Renamed P5_MODE_* to P5_INTF_SEL_*. fits the function more * Convert if-statement for speed bits to a switch suggested by Daniel Santos * Refactor flow_control pause bits and don't use state->link in mt7530_phylink_mac_config() suggested by Russell King * Move MAC tx/rx en/disable to mt7530_phylink_mac_link_up/down() suggested by Russell King * Always support PHY_INTERFACE_MODE_NA in mt7530_phylink_validate() suggested by Russell King * Added phylink_set_port_modes() in mt7530_phylink_validate() suggested by Russell King * Remove dev_err on the end of mt7530_phylink_mac_config() suggested by Russell King --- drivers/net/dsa/mt7530.c | 255 +++++++++++++++++++++++++++++---------- drivers/net/dsa/mt7530.h | 32 +++-- 2 files changed, 203 insertions(+), 84 deletions(-) diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 3181e95586d6..73a2204bf81a 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -13,7 +13,7 @@ #include #include #include -#include +#include #include #include #include @@ -633,63 +633,6 @@ mt7530_get_sset_count(struct dsa_switch *ds, int port, int sset) return ARRAY_SIZE(mt7530_mib); } -static void mt7530_adjust_link(struct dsa_switch *ds, int port, - struct phy_device *phydev) -{ - struct mt7530_priv *priv = ds->priv; - - if (phy_is_pseudo_fixed_link(phydev)) { - dev_dbg(priv->dev, "phy-mode for master device = %x\n", - phydev->interface); - - /* Setup TX circuit incluing relevant PAD and driving */ - mt7530_pad_clk_setup(ds, phydev->interface); - - if (priv->id == ID_MT7530) { - /* Setup RX circuit, relevant PAD and driving on the - * host which must be placed after the setup on the - * device side is all finished. - */ - mt7623_pad_clk_setup(ds); - } - } else { - u16 lcl_adv = 0, rmt_adv = 0; - u8 flowctrl; - u32 mcr = PMCR_USERP_LINK | PMCR_FORCE_MODE; - - switch (phydev->speed) { - case SPEED_1000: - mcr |= PMCR_FORCE_SPEED_1000; - break; - case SPEED_100: - mcr |= PMCR_FORCE_SPEED_100; - break; - } - - if (phydev->link) - mcr |= PMCR_FORCE_LNK; - - if (phydev->duplex) { - mcr |= PMCR_FORCE_FDX; - - if (phydev->pause) - rmt_adv = LPA_PAUSE_CAP; - if (phydev->asym_pause) - rmt_adv |= LPA_PAUSE_ASYM; - - lcl_adv = linkmode_adv_to_lcl_adv_t( - phydev->advertising); - flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv); - - if (flowctrl & FLOW_CTRL_TX) - mcr |= PMCR_TX_FC_EN; - if (flowctrl & FLOW_CTRL_RX) - mcr |= PMCR_RX_FC_EN; - } - mt7530_write(priv, MT7530_PMCR_P(port), mcr); - } -} - static int mt7530_cpu_port_enable(struct mt7530_priv *priv, int port) @@ -698,9 +641,6 @@ mt7530_cpu_port_enable(struct mt7530_priv *priv, mt7530_write(priv, MT7530_PVC_P(port), PORT_SPEC_TAG); - /* Setup the MAC by default for the cpu port */ - mt7530_write(priv, MT7530_PMCR_P(port), PMCR_CPUP_LINK); - /* Disable auto learning on the cpu port */ mt7530_set(priv, MT7530_PSC_P(port), SA_DIS); @@ -728,9 +668,6 @@ mt7530_port_enable(struct dsa_switch *ds, int port, mutex_lock(&priv->reg_mutex); - /* Setup the MAC for the user port */ - mt7530_write(priv, MT7530_PMCR_P(port), PMCR_USERP_LINK); - /* Allow the user port gets connected to the cpu port and also * restore the port matrix if the port is the member of a certain * bridge. @@ -739,7 +676,7 @@ mt7530_port_enable(struct dsa_switch *ds, int port, priv->ports[port].enable = true; mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, priv->ports[port].pm); - mt7530_port_set_status(priv, port, 1); + mt7530_port_set_status(priv, port, 0); mutex_unlock(&priv->reg_mutex); @@ -1299,6 +1236,8 @@ mt7530_setup(struct dsa_switch *ds) val |= MHWTRAP_MANUAL; mt7530_write(priv, MT7530_MHWTRAP, val); + priv->p6_interface = PHY_INTERFACE_MODE_NA; + /* Enable and reset MIB counters */ mt7530_mib_reset(ds); @@ -1323,6 +1262,186 @@ mt7530_setup(struct dsa_switch *ds) return 0; } +static void mt7530_phylink_mac_config(struct dsa_switch *ds, int port, + unsigned int mode, + const struct phylink_link_state *state) +{ + struct mt7530_priv *priv = ds->priv; + u32 mcr_cur, mcr_new; + + switch (port) { + case 0: /* Internal phy */ + case 1: + case 2: + case 3: + case 4: + if (state->interface != PHY_INTERFACE_MODE_GMII) + return; + break; + /* case 5: Port 5 is not supported! */ + case 6: /* 1st cpu port */ + if (state->interface != PHY_INTERFACE_MODE_RGMII && + state->interface != PHY_INTERFACE_MODE_TRGMII) + return; + + if (priv->p6_interface == state->interface) + break; + /* Setup TX circuit incluing relevant PAD and driving */ + mt7530_pad_clk_setup(ds, state->interface); + + if (priv->id == ID_MT7530) { + /* Setup RX circuit, relevant PAD and driving on the + * host which must be placed after the setup on the + * device side is all finished. + */ + mt7623_pad_clk_setup(ds); + } + priv->p6_interface = state->interface; + break; + default: + dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port); + return; + } + + mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port)); + mcr_new = mcr_cur; + mcr_new &= ~(PMCR_FORCE_SPEED_1000 | PMCR_FORCE_SPEED_100 | + PMCR_FORCE_FDX | PMCR_TX_FC_EN | PMCR_RX_FC_EN); + mcr_new |= PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | PMCR_BACKOFF_EN | + PMCR_BACKPR_EN | PMCR_FORCE_MODE | PMCR_FORCE_LNK; + + switch (state->speed) { + case SPEED_1000: + mcr_new |= PMCR_FORCE_SPEED_1000; + break; + case SPEED_100: + mcr_new |= PMCR_FORCE_SPEED_100; + break; + } + if (state->duplex == DUPLEX_FULL) { + mcr_new |= PMCR_FORCE_FDX; + if (state->pause & MLO_PAUSE_TX) + mcr_new |= PMCR_TX_FC_EN; + if (state->pause & MLO_PAUSE_RX) + mcr_new |= PMCR_RX_FC_EN; + } + + if (mcr_new != mcr_cur) + mt7530_write(priv, MT7530_PMCR_P(port), mcr_new); +} + +static void mt7530_phylink_mac_link_down(struct dsa_switch *ds, int port, + unsigned int mode, + phy_interface_t interface) +{ + struct mt7530_priv *priv = ds->priv; + + mt7530_port_set_status(priv, port, 0); +} + +static void mt7530_phylink_mac_link_up(struct dsa_switch *ds, int port, + unsigned int mode, + phy_interface_t interface, + struct phy_device *phydev) +{ + struct mt7530_priv *priv = ds->priv; + + mt7530_port_set_status(priv, port, 1); +} + +static void mt7530_phylink_validate(struct dsa_switch *ds, int port, + unsigned long *supported, + struct phylink_link_state *state) +{ + __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; + + switch (port) { + case 0: /* Internal phy */ + case 1: + case 2: + case 3: + case 4: + if (state->interface != PHY_INTERFACE_MODE_NA && + state->interface != PHY_INTERFACE_MODE_GMII) + goto unsupported; + break; + /* case 5: Port 5 not supported! */ + case 6: /* 1st cpu port */ + if (state->interface != PHY_INTERFACE_MODE_NA && + state->interface != PHY_INTERFACE_MODE_RGMII && + state->interface != PHY_INTERFACE_MODE_TRGMII) + goto unsupported; + break; + default: + linkmode_zero(supported); + dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port); + return; + } + + phylink_set_port_modes(mask); + phylink_set(mask, Autoneg); + + if (state->interface != PHY_INTERFACE_MODE_TRGMII) { + phylink_set(mask, 10baseT_Half); + phylink_set(mask, 10baseT_Full); + phylink_set(mask, 100baseT_Half); + phylink_set(mask, 100baseT_Full); + phylink_set(mask, 1000baseT_Half); + } + + phylink_set(mask, 1000baseT_Full); + + phylink_set(mask, Pause); + phylink_set(mask, Asym_Pause); + + linkmode_and(supported, supported, mask); + linkmode_and(state->advertising, state->advertising, mask); + return; + +unsupported: + linkmode_zero(supported); +} + +static int +mt7530_phylink_mac_link_state(struct dsa_switch *ds, int port, + struct phylink_link_state *state) +{ + struct mt7530_priv *priv = ds->priv; + u32 pmsr; + + if (port < 0 || port >= MT7530_NUM_PORTS) + return -EINVAL; + + pmsr = mt7530_read(priv, MT7530_PMSR_P(port)); + + state->link = (pmsr & PMSR_LINK); + state->an_complete = state->link; + state->duplex = !!(pmsr & PMSR_DPX); + + switch (pmsr & PMSR_SPEED_MASK) { + case PMSR_SPEED_10: + state->speed = SPEED_10; + break; + case PMSR_SPEED_100: + state->speed = SPEED_100; + break; + case PMSR_SPEED_1000: + state->speed = SPEED_1000; + break; + default: + state->speed = SPEED_UNKNOWN; + break; + } + + state->pause &= ~(MLO_PAUSE_RX | MLO_PAUSE_TX); + if (pmsr & PMSR_RX_FC) + state->pause |= MLO_PAUSE_RX; + if (pmsr & PMSR_TX_FC) + state->pause |= MLO_PAUSE_TX; + + return 1; +} + static const struct dsa_switch_ops mt7530_switch_ops = { .get_tag_protocol = mtk_get_tag_protocol, .setup = mt7530_setup, @@ -1331,7 +1450,6 @@ static const struct dsa_switch_ops mt7530_switch_ops = { .phy_write = mt7530_phy_write, .get_ethtool_stats = mt7530_get_ethtool_stats, .get_sset_count = mt7530_get_sset_count, - .adjust_link = mt7530_adjust_link, .port_enable = mt7530_port_enable, .port_disable = mt7530_port_disable, .port_stp_state_set = mt7530_stp_state_set, @@ -1344,6 +1462,11 @@ static const struct dsa_switch_ops mt7530_switch_ops = { .port_vlan_prepare = mt7530_port_vlan_prepare, .port_vlan_add = mt7530_port_vlan_add, .port_vlan_del = mt7530_port_vlan_del, + .phylink_validate = mt7530_phylink_validate, + .phylink_mac_link_state = mt7530_phylink_mac_link_state, + .phylink_mac_config = mt7530_phylink_mac_config, + .phylink_mac_link_down = mt7530_phylink_mac_link_down, + .phylink_mac_link_up = mt7530_phylink_mac_link_up, }; static const struct of_device_id mt7530_of_match[] = { diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h index bfac90f48102..107dd04acede 100644 --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h @@ -198,26 +198,20 @@ enum mt7530_vlan_port_attr { #define PMCR_FORCE_SPEED_100 BIT(2) #define PMCR_FORCE_FDX BIT(1) #define PMCR_FORCE_LNK BIT(0) -#define PMCR_COMMON_LINK (PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | \ - PMCR_BACKOFF_EN | PMCR_BACKPR_EN | \ - PMCR_TX_EN | PMCR_RX_EN | \ - PMCR_TX_FC_EN | PMCR_RX_FC_EN) -#define PMCR_CPUP_LINK (PMCR_COMMON_LINK | PMCR_FORCE_MODE | \ - PMCR_FORCE_SPEED_1000 | \ - PMCR_FORCE_FDX | \ - PMCR_FORCE_LNK) -#define PMCR_USERP_LINK PMCR_COMMON_LINK -#define PMCR_FIXED_LINK (PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | \ - PMCR_FORCE_MODE | PMCR_TX_EN | \ - PMCR_RX_EN | PMCR_BACKPR_EN | \ - PMCR_BACKOFF_EN | \ - PMCR_FORCE_SPEED_1000 | \ - PMCR_FORCE_FDX | \ - PMCR_FORCE_LNK) -#define PMCR_FIXED_LINK_FC (PMCR_FIXED_LINK | \ - PMCR_TX_FC_EN | PMCR_RX_FC_EN) +#define PMCR_SPEED_MASK (PMCR_FORCE_SPEED_100 | \ + PMCR_FORCE_SPEED_1000) #define MT7530_PMSR_P(x) (0x3008 + (x) * 0x100) +#define PMSR_EEE1G BIT(7) +#define PMSR_EEE100M BIT(6) +#define PMSR_RX_FC BIT(5) +#define PMSR_TX_FC BIT(4) +#define PMSR_SPEED_1000 BIT(3) +#define PMSR_SPEED_100 BIT(2) +#define PMSR_SPEED_10 0x00 +#define PMSR_SPEED_MASK (PMSR_SPEED_100 | PMSR_SPEED_1000) +#define PMSR_DPX BIT(1) +#define PMSR_LINK BIT(0) /* Register for MIB */ #define MT7530_PORT_MIB_COUNTER(x) (0x4000 + (x) * 0x100) @@ -423,6 +417,7 @@ struct mt7530_port { * @ports: Holding the state among ports * @reg_mutex: The lock for protecting among process accessing * registers + * @p6_interface Holding the current port 6 interface */ struct mt7530_priv { struct device *dev; @@ -435,6 +430,7 @@ struct mt7530_priv { struct gpio_desc *reset; unsigned int id; bool mcm; + phy_interface_t p6_interface; struct mt7530_port ports[MT7530_NUM_PORTS]; /* protect among processes for registers access*/