@@ -48,7 +48,8 @@ config PHY_SUN9I_USB
config PHY_SUN50I_USB3
tristate "Allwinner H6 SoC USB3 PHY driver"
- depends on ARCH_SUNXI && HAS_IOMEM && OF
+ depends on ARCH_SUNXI || COMPILE_TEST
+ depends on HAS_IOMEM && OF
depends on RESET_CONTROLLER
select GENERIC_PHY
help
@@ -50,7 +50,7 @@ config PHY_BCM_NS_USB3
config PHY_NS2_PCIE
tristate "Broadcom Northstar2 PCIe PHY driver"
- depends on OF && MDIO_BUS_MUX_BCM_IPROC
+ depends on (OF && MDIO_BUS_MUX_BCM_IPROC) || (COMPILE_TEST && MDIO_BUS)
select GENERIC_PHY
default ARCH_BCM_IPROC
help
@@ -83,7 +83,7 @@ config PHY_BRCM_SATA
config PHY_BRCM_USB
tristate "Broadcom STB USB PHY driver"
- depends on ARCH_BRCMSTB
+ depends on ARCH_BRCMSTB || COMPILE_TEST
depends on OF
select GENERIC_PHY
select SOC_BRCMSTB
@@ -10,14 +10,16 @@ config ARMADA375_USBCLUSTER_PHY
config PHY_BERLIN_SATA
tristate "Marvell Berlin SATA PHY driver"
- depends on ARCH_BERLIN && HAS_IOMEM && OF
+ depends on ARCH_BERLIN || COMPILE_TEST
+ depends on OF && HAS_IOMEM
select GENERIC_PHY
help
Enable this to support the SATA PHY on Marvell Berlin SoCs.
config PHY_BERLIN_USB
tristate "Marvell Berlin USB PHY Driver"
- depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
+ depends on ARCH_BERLIN || COMPILE_TEST
+ depends on OF && HAS_IOMEM && RESET_CONTROLLER
select GENERIC_PHY
help
Enable this to support the USB PHY on Marvell Berlin SoCs.
@@ -95,7 +97,7 @@ config PHY_PXA_28NM_USB2
config PHY_PXA_USB
tristate "Marvell PXA USB PHY Driver"
- depends on ARCH_PXA || ARCH_MMP
+ depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST
select GENERIC_PHY
help
Enable this to support Marvell PXA USB PHY driver for Marvell
@@ -4,7 +4,8 @@
#
config PHY_MTK_TPHY
tristate "MediaTek T-PHY Driver"
- depends on ARCH_MEDIATEK && OF
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on OF
select GENERIC_PHY
help
Say 'Y' here to add support for MediaTek T-PHY driver,
@@ -16,7 +17,8 @@ config PHY_MTK_TPHY
config PHY_MTK_UFS
tristate "MediaTek UFS M-PHY driver"
- depends on ARCH_MEDIATEK && OF
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on OF
select GENERIC_PHY
help
Support for UFS M-PHY on MediaTek chipsets.
@@ -26,7 +28,8 @@ config PHY_MTK_UFS
config PHY_MTK_XSPHY
tristate "MediaTek XS-PHY Driver"
- depends on ARCH_MEDIATEK && OF
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ depends on OF
select GENERIC_PHY
help
Enable this to support the SuperSpeedPlus XS-PHY transceiver for
@@ -32,7 +32,7 @@ config PHY_EXYNOS_PCIE
config PHY_SAMSUNG_USB2
tristate "Samsung USB 2.0 PHY driver"
depends on HAS_IOMEM
- depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
+ depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 || COMPILE_TEST
select GENERIC_PHY
select MFD_SYSCON
default ARCH_EXYNOS
@@ -60,7 +60,7 @@ config PHY_EXYNOS5250_USB2
config PHY_S5PV210_USB2
bool "Support for S5PV210"
depends on PHY_SAMSUNG_USB2
- depends on ARCH_S5PV210
+ depends on ARCH_S5PV210 || COMPILE_TEST
help
Enable USB PHY support for S5PV210. This option requires that Samsung
USB 2.0 PHY driver is enabled and means that support for this
@@ -69,7 +69,7 @@ config PHY_S5PV210_USB2
config PHY_EXYNOS5_USBDRD
tristate "Exynos5 SoC series USB DRD PHY driver"
- depends on ARCH_EXYNOS && OF
+ depends on (ARCH_EXYNOS && OF) || COMPILE_TEST
depends on HAS_IOMEM
depends on USB_DWC3_EXYNOS
select GENERIC_PHY
@@ -82,7 +82,7 @@ config PHY_EXYNOS5_USBDRD
config PHY_EXYNOS5250_SATA
tristate "Exynos5250 Sata SerDes/PHY driver"
- depends on SOC_EXYNOS5250
+ depends on SOC_EXYNOS5250 || COMPILE_TEST
depends on HAS_IOMEM
depends on OF
select GENERIC_PHY
@@ -4,7 +4,7 @@
#
config PHY_DA8XX_USB
tristate "TI DA8xx USB PHY Driver"
- depends on ARCH_DAVINCI_DA8XX
+ depends on ARCH_DAVINCI_DA8XX || COMPILE_TEST
select GENERIC_PHY
select MFD_SYSCON
help
@@ -14,7 +14,7 @@ config PHY_DA8XX_USB
config PHY_DM816X_USB
tristate "TI dm816x USB PHY driver"
- depends on ARCH_OMAP2PLUS
+ depends on ARCH_OMAP2PLUS || COMPILE_TEST
depends on USB_SUPPORT
select GENERIC_PHY
select USB_PHY
Some of the phy drivers can be compile tested to increase build coverage. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- Changes since v1: 1. Add COMPILE_TEST to two Broadcom drivers. --- drivers/phy/allwinner/Kconfig | 3 ++- drivers/phy/broadcom/Kconfig | 4 ++-- drivers/phy/marvell/Kconfig | 8 +++++--- drivers/phy/mediatek/Kconfig | 9 ++++++--- drivers/phy/samsung/Kconfig | 8 ++++---- drivers/phy/ti/Kconfig | 4 ++-- 6 files changed, 21 insertions(+), 15 deletions(-)