diff mbox series

[RESEND,v3,4/4] scsi: ufs-mediatek: gate ref-clk during Auto-Hibern8

Message ID 20200129105251.12466-5-stanley.chu@mediatek.com (mailing list archive)
State New, archived
Headers show
Series MediaTek UFS vendor implemenation part III and Auto-Hibern8 fix | expand

Commit Message

Stanley Chu Jan. 29, 2020, 10:52 a.m. UTC
In current UFS driver design, hba->uic_link_state will not
be changed after link enters Hibern8 state by Auto-Hibern8 mechanism.
In this case, reference clock gating will be skipped unless special
handling is implemented in vendor's callbacks.

Support reference clock gating during Auto-Hibern8 period in
MediaTek Chipsets: If link state is already in Hibern8 while
Auto-Hibern8 feature is enabled, gate reference clock in
setup_clocks callback.

Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
---
 drivers/scsi/ufs/ufs-mediatek.c | 38 +++++++++++++++++++++++----------
 drivers/scsi/ufs/ufs-mediatek.h | 12 +++++++++++
 2 files changed, 39 insertions(+), 11 deletions(-)

Comments

Bean Huo Jan. 30, 2020, 5:46 p.m. UTC | #1
> Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Avri Altman Jan. 31, 2020, 6:48 p.m. UTC | #2
> 
> +static u32 ufs_mtk_link_get_state(struct ufs_hba *hba)
> +{
> +       u32 val;
> +
> +       ufshcd_writel(hba, 0x20, REG_UFS_DEBUG_SEL);
> +       val = ufshcd_readl(hba, REG_UFS_PROBE);
> +       val = val >> 28;
> +
> +       return val;
> +}
A little bit strange that you are relying on debug registers to setup your ref-clock.
Is this this debug info is always available?

Thanks,
Avri
Stanley Chu Feb. 1, 2020, 1:45 a.m. UTC | #3
Hi Avri,

On Fri, 2020-01-31 at 18:48 +0000, Avri Altman wrote:
> > 
> > +static u32 ufs_mtk_link_get_state(struct ufs_hba *hba)
> > +{
> > +       u32 val;
> > +
> > +       ufshcd_writel(hba, 0x20, REG_UFS_DEBUG_SEL);
> > +       val = ufshcd_readl(hba, REG_UFS_PROBE);
> > +       val = val >> 28;
> > +
> > +       return val;
> > +}
> A little bit strange that you are relying on debug registers to setup your ref-clock.
> Is this this debug info is always available?
> 

Yes, this register is only for this purpose now (query link state) and
always existed in MediaTek UFS host.

Thanks,
Stanley
diff mbox series

Patch

diff --git a/drivers/scsi/ufs/ufs-mediatek.c b/drivers/scsi/ufs/ufs-mediatek.c
index d78897a14905..0ce08872d671 100644
--- a/drivers/scsi/ufs/ufs-mediatek.c
+++ b/drivers/scsi/ufs/ufs-mediatek.c
@@ -143,6 +143,17 @@  static int ufs_mtk_setup_ref_clk(struct ufs_hba *hba, bool on)
 	return 0;
 }
 
+static u32 ufs_mtk_link_get_state(struct ufs_hba *hba)
+{
+	u32 val;
+
+	ufshcd_writel(hba, 0x20, REG_UFS_DEBUG_SEL);
+	val = ufshcd_readl(hba, REG_UFS_PROBE);
+	val = val >> 28;
+
+	return val;
+}
+
 /**
  * ufs_mtk_setup_clocks - enables/disable clocks
  * @hba: host controller instance
@@ -155,7 +166,7 @@  static int ufs_mtk_setup_clocks(struct ufs_hba *hba, bool on,
 				enum ufs_notify_change_status status)
 {
 	struct ufs_mtk_host *host = ufshcd_get_variant(hba);
-	int ret = -EINVAL;
+	int ret = 0;
 
 	/*
 	 * In case ufs_mtk_init() is not yet done, simply ignore.
@@ -165,19 +176,24 @@  static int ufs_mtk_setup_clocks(struct ufs_hba *hba, bool on,
 	if (!host)
 		return 0;
 
-	switch (status) {
-	case PRE_CHANGE:
-		if (!on && !ufshcd_is_link_active(hba)) {
+	if (!on && status == PRE_CHANGE) {
+		if (!ufshcd_is_link_active(hba)) {
 			ufs_mtk_setup_ref_clk(hba, on);
 			ret = phy_power_off(host->mphy);
+		} else {
+			/*
+			 * Gate ref-clk if link state is in Hibern8
+			 * triggered by Auto-Hibern8.
+			 */
+			if (!ufshcd_can_hibern8_during_gating(hba) &&
+			    ufshcd_is_auto_hibern8_enabled(hba) &&
+			    ufs_mtk_link_get_state(hba) ==
+			    VS_LINK_HIBERN8)
+				ufs_mtk_setup_ref_clk(hba, on);
 		}
-		break;
-	case POST_CHANGE:
-		if (on) {
-			ret = phy_power_on(host->mphy);
-			ufs_mtk_setup_ref_clk(hba, on);
-		}
-		break;
+	} else if (on && status == POST_CHANGE) {
+		ret = phy_power_on(host->mphy);
+		ufs_mtk_setup_ref_clk(hba, on);
 	}
 
 	return ret;
diff --git a/drivers/scsi/ufs/ufs-mediatek.h b/drivers/scsi/ufs/ufs-mediatek.h
index fccdd979d6fb..492414e5f481 100644
--- a/drivers/scsi/ufs/ufs-mediatek.h
+++ b/drivers/scsi/ufs/ufs-mediatek.h
@@ -53,6 +53,18 @@ 
 #define VS_SAVEPOWERCONTROL         0xD0A6
 #define VS_UNIPROPOWERDOWNCONTROL   0xD0A8
 
+/*
+ * Vendor specific link state
+ */
+enum {
+	VS_LINK_DISABLED            = 0,
+	VS_LINK_DOWN                = 1,
+	VS_LINK_UP                  = 2,
+	VS_LINK_HIBERN8             = 3,
+	VS_LINK_LOST                = 4,
+	VS_LINK_CFG                 = 5,
+};
+
 /*
  * SiP commands
  */