diff mbox series

[net-next] net: dsa: mt7530: use resolved link config in mac_link_up()

Message ID 20200327144412.100913-1-opensource@vdorst.com (mailing list archive)
State New, archived
Headers show
Series [net-next] net: dsa: mt7530: use resolved link config in mac_link_up() | expand

Commit Message

René van Dorst March 27, 2020, 2:44 p.m. UTC 
Convert the mt7530 switch driver to use the finalised link
parameters in mac_link_up() rather than the parameters in mac_config().

Signed-off-by: René van Dorst <opensource@vdorst.com>
---
 drivers/net/dsa/mt7530.c | 57 +++++++++++++++++-----------------------
 drivers/net/dsa/mt7530.h |  4 +++
 2 files changed, 28 insertions(+), 33 deletions(-)

Comments

Sean Wang March 27, 2020, 8:25 p.m. UTC | #1 
From: Sean Wang <sean.wang@mediatek.com>

>Convert the mt7530 switch driver to use the finalised link parameters in mac_link_up() rather than the parameters in mac_config().
>
>Signed-off-by: René van Dorst <opensource@vdorst.com>

That patch works well with either TRGMI on RGMII mode on MT7623 reference board.

Tested-by: Sean Wang <sean.wang@mediatek.com>

>---
> drivers/net/dsa/mt7530.c | 57 +++++++++++++++++-----------------------
> drivers/net/dsa/mt7530.h |  4 +++
> 2 files changed, 28 insertions(+), 33 deletions(-)
>
>diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 6e91fe2f4b9a..ef57552db260 100644
>--- a/drivers/net/dsa/mt7530.c
>+++ b/drivers/net/dsa/mt7530.c
>@@ -563,17 +563,6 @@ mt7530_mib_reset(struct dsa_switch *ds)
> 	mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_ACTIVATE);  }
> 
>-static void
>-mt7530_port_set_status(struct mt7530_priv *priv, int port, int enable) -{
>-	u32 mask = PMCR_TX_EN | PMCR_RX_EN | PMCR_FORCE_LNK;
>-
>-	if (enable)
>-		mt7530_set(priv, MT7530_PMCR_P(port), mask);
>-	else
>-		mt7530_clear(priv, MT7530_PMCR_P(port), mask);
>-}
>-
>
David Miller March 30, 2020, 5:09 a.m. UTC | #2 
From: René van Dorst <opensource@vdorst.com>
Date: Fri, 27 Mar 2020 15:44:12 +0100

> Convert the mt7530 switch driver to use the finalised link
> parameters in mac_link_up() rather than the parameters in mac_config().
> 
> Signed-off-by: René van Dorst <opensource@vdorst.com>

Applied.
diff mbox series

Patch

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 6e91fe2f4b9a..ef57552db260 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -563,17 +563,6 @@  mt7530_mib_reset(struct dsa_switch *ds)
 	mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_ACTIVATE);
 }
 
-static void
-mt7530_port_set_status(struct mt7530_priv *priv, int port, int enable)
-{
-	u32 mask = PMCR_TX_EN | PMCR_RX_EN | PMCR_FORCE_LNK;
-
-	if (enable)
-		mt7530_set(priv, MT7530_PMCR_P(port), mask);
-	else
-		mt7530_clear(priv, MT7530_PMCR_P(port), mask);
-}
-
 static int mt7530_phy_read(struct dsa_switch *ds, int port, int regnum)
 {
 	struct mt7530_priv *priv = ds->priv;
@@ -750,7 +739,7 @@  mt7530_port_enable(struct dsa_switch *ds, int port,
 	priv->ports[port].enable = true;
 	mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
 		   priv->ports[port].pm);
-	mt7530_port_set_status(priv, port, 0);
+	mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK);
 
 	mutex_unlock(&priv->reg_mutex);
 
@@ -773,7 +762,7 @@  mt7530_port_disable(struct dsa_switch *ds, int port)
 	priv->ports[port].enable = false;
 	mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
 		   PCR_MATRIX_CLR);
-	mt7530_port_set_status(priv, port, 0);
+	mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK);
 
 	mutex_unlock(&priv->reg_mutex);
 }
@@ -1499,8 +1488,7 @@  static void mt7530_phylink_mac_config(struct dsa_switch *ds, int port,
 
 	mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port));
 	mcr_new = mcr_cur;
-	mcr_new &= ~(PMCR_FORCE_SPEED_1000 | PMCR_FORCE_SPEED_100 |
-		     PMCR_FORCE_FDX | PMCR_TX_FC_EN | PMCR_RX_FC_EN);
+	mcr_new &= ~PMCR_LINK_SETTINGS_MASK;
 	mcr_new |= PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | PMCR_BACKOFF_EN |
 		   PMCR_BACKPR_EN | PMCR_FORCE_MODE;
 
@@ -1508,22 +1496,6 @@  static void mt7530_phylink_mac_config(struct dsa_switch *ds, int port,
 	if (port == 5 && dsa_is_user_port(ds, 5))
 		mcr_new |= PMCR_EXT_PHY;
 
-	switch (state->speed) {
-	case SPEED_1000:
-		mcr_new |= PMCR_FORCE_SPEED_1000;
-		break;
-	case SPEED_100:
-		mcr_new |= PMCR_FORCE_SPEED_100;
-		break;
-	}
-	if (state->duplex == DUPLEX_FULL) {
-		mcr_new |= PMCR_FORCE_FDX;
-		if (state->pause & MLO_PAUSE_TX)
-			mcr_new |= PMCR_TX_FC_EN;
-		if (state->pause & MLO_PAUSE_RX)
-			mcr_new |= PMCR_RX_FC_EN;
-	}
-
 	if (mcr_new != mcr_cur)
 		mt7530_write(priv, MT7530_PMCR_P(port), mcr_new);
 }
@@ -1534,7 +1506,7 @@  static void mt7530_phylink_mac_link_down(struct dsa_switch *ds, int port,
 {
 	struct mt7530_priv *priv = ds->priv;
 
-	mt7530_port_set_status(priv, port, 0);
+	mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK);
 }
 
 static void mt7530_phylink_mac_link_up(struct dsa_switch *ds, int port,
@@ -1545,8 +1517,27 @@  static void mt7530_phylink_mac_link_up(struct dsa_switch *ds, int port,
 				       bool tx_pause, bool rx_pause)
 {
 	struct mt7530_priv *priv = ds->priv;
+	u32 mcr;
+
+	mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK;
+
+	switch (speed) {
+	case SPEED_1000:
+		mcr |= PMCR_FORCE_SPEED_1000;
+		break;
+	case SPEED_100:
+		mcr |= PMCR_FORCE_SPEED_100;
+		break;
+	}
+	if (duplex == DUPLEX_FULL) {
+		mcr |= PMCR_FORCE_FDX;
+		if (tx_pause)
+			mcr |= PMCR_TX_FC_EN;
+		if (rx_pause)
+			mcr |= PMCR_RX_FC_EN;
+	}
 
-	mt7530_port_set_status(priv, port, 1);
+	mt7530_set(priv, MT7530_PMCR_P(port), mcr);
 }
 
 static void mt7530_phylink_validate(struct dsa_switch *ds, int port,
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index b7cfb3d52b1c..ef9b52f3152b 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -206,6 +206,10 @@  enum mt7530_vlan_port_attr {
 #define  PMCR_FORCE_LNK			BIT(0)
 #define  PMCR_SPEED_MASK		(PMCR_FORCE_SPEED_100 | \
 					 PMCR_FORCE_SPEED_1000)
+#define  PMCR_LINK_SETTINGS_MASK	(PMCR_TX_EN | PMCR_FORCE_SPEED_1000 | \
+					 PMCR_RX_EN | PMCR_FORCE_SPEED_100 | \
+					 PMCR_TX_FC_EN | PMCR_RX_FC_EN | \
+					 PMCR_FORCE_FDX | PMCR_FORCE_LNK)
 
 #define MT7530_PMSR_P(x)		(0x3008 + (x) * 0x100)
 #define  PMSR_EEE1G			BIT(7)