diff mbox series

[v15,1/3] dt-bindings: display: mediatek: control dpi pins mode to avoid leakage

Message ID 20200415011319.25559-2-jitao.shi@mediatek.com (mailing list archive)
State New, archived
Headers show
Series mt8183 dpi support pin mode swap | expand

Commit Message

Jitao Shi April 15, 2020, 1:13 a.m. UTC 
Add property "pinctrl-names" to swap pin mode between gpio and dpi mode. Set
the dpi pins to gpio mode and output-low to avoid leakage current when dpi
disabled.

Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
---
 Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Chun-Kuang Hu April 19, 2020, 12:04 a.m. UTC | #1 
Hi, Jitao:

Jitao Shi <jitao.shi@mediatek.com> 於 2020年4月15日 週三 上午9:13寫道：
>
> Add property "pinctrl-names" to swap pin mode between gpio and dpi mode. Set
> the dpi pins to gpio mode and output-low to avoid leakage current when dpi
> disabled.

Applied to mediatek-drm-next [1], thanks.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux.git/log/?h=mediatek-drm-next

Regards,
Chun-Kuang.

>
> Acked-by: Rob Herring <robh@kernel.org>
> Reviewed-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> ---
>  Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt | 6 ++++++
>  1 file changed, 6 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
> index 58914cf681b8..77def4456706 100644
> --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
> +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
> @@ -17,6 +17,9 @@ Required properties:
>    Documentation/devicetree/bindings/graph.txt. This port should be connected
>    to the input port of an attached HDMI or LVDS encoder chip.
>
> +Optional properties:
> +- pinctrl-names: Contain "default" and "sleep".
> +
>  Example:
>
>  dpi0: dpi@1401d000 {
> @@ -27,6 +30,9 @@ dpi0: dpi@1401d000 {
>                  <&mmsys CLK_MM_DPI_ENGINE>,
>                  <&apmixedsys CLK_APMIXED_TVDPLL>;
>         clock-names = "pixel", "engine", "pll";
> +       pinctrl-names = "default", "sleep";
> +       pinctrl-0 = <&dpi_pin_func>;
> +       pinctrl-1 = <&dpi_pin_idle>;
>
>         port {
>                 dpi0_out: endpoint {
> --
> 2.12.5
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
index 58914cf681b8..77def4456706 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.txt
@@ -17,6 +17,9 @@  Required properties:
   Documentation/devicetree/bindings/graph.txt. This port should be connected
   to the input port of an attached HDMI or LVDS encoder chip.
 
+Optional properties:
+- pinctrl-names: Contain "default" and "sleep".
+
 Example:
 
 dpi0: dpi@1401d000 {
@@ -27,6 +30,9 @@  dpi0: dpi@1401d000 {
 		 <&mmsys CLK_MM_DPI_ENGINE>,
 		 <&apmixedsys CLK_APMIXED_TVDPLL>;
 	clock-names = "pixel", "engine", "pll";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dpi_pin_func>;
+	pinctrl-1 = <&dpi_pin_idle>;
 
 	port {
 		dpi0_out: endpoint {