@@ -1353,23 +1353,6 @@ static int ufshcd_devfreq_get_dev_status(struct device *dev,
return 0;
}
-static struct devfreq_dev_profile ufs_devfreq_profile = {
- .polling_ms = 100,
- .target = ufshcd_devfreq_target,
- .get_dev_status = ufshcd_devfreq_get_dev_status,
-};
-
-#if IS_ENABLED(CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND)
-static struct devfreq_simple_ondemand_data ufs_ondemand_data = {
- .upthreshold = 70,
- .downdifferential = 5,
-};
-
-static void *gov_data = &ufs_ondemand_data;
-#else
-static void *gov_data; /* NULL */
-#endif
-
static int ufshcd_devfreq_init(struct ufs_hba *hba)
{
struct list_head *clk_list = &hba->clk_list_head;
@@ -1385,12 +1368,12 @@ static int ufshcd_devfreq_init(struct ufs_hba *hba)
dev_pm_opp_add(hba->dev, clki->min_freq, 0);
dev_pm_opp_add(hba->dev, clki->max_freq, 0);
- ufshcd_vops_config_scaling_param(hba, &ufs_devfreq_profile,
- gov_data);
+ ufshcd_vops_config_scaling_param(hba, &hba->vps->devfreq_profile,
+ &hba->vps->ondemand_data);
devfreq = devfreq_add_device(hba->dev,
- &ufs_devfreq_profile,
+ &hba->vps->devfreq_profile,
DEVFREQ_GOV_SIMPLE_ONDEMAND,
- gov_data);
+ &hba->vps->ondemand_data);
if (IS_ERR(devfreq)) {
ret = PTR_ERR(devfreq);
dev_err(hba->dev, "Unable to register with devfreq %d\n", ret);
@@ -4314,7 +4297,7 @@ int ufshcd_hba_enable(struct ufs_hba *hba)
* instruction might be read back.
* This delay can be changed based on the controller.
*/
- ufshcd_delay_us(hba->hba_enable_delay_us, 100);
+ ufshcd_delay_us(hba->vps->hba_enable_delay_us, 100);
/* wait for the host controller to complete initialization */
retry = 50;
@@ -7477,6 +7460,15 @@ static const struct attribute_group *ufshcd_driver_groups[] = {
NULL,
};
+static struct ufs_hba_variant_params ufs_hba_vps = {
+ .hba_enable_delay_us = 1000,
+ .devfreq_profile.polling_ms = 100,
+ .devfreq_profile.target = ufshcd_devfreq_target,
+ .devfreq_profile.get_dev_status = ufshcd_devfreq_get_dev_status,
+ .ondemand_data.upthreshold = 70,
+ .ondemand_data.downdifferential = 5,
+};
+
static struct scsi_host_template ufshcd_driver_template = {
.module = THIS_MODULE,
.name = UFSHCD,
@@ -8724,7 +8716,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
hba->mmio_base = mmio_base;
hba->irq = irq;
- hba->hba_enable_delay_us = 1000;
+ hba->vps = &ufs_hba_vps;
err = ufshcd_hba_init(hba);
if (err)
@@ -566,6 +566,12 @@ enum ufshcd_caps {
UFSHCD_CAP_WB_EN = 1 << 7,
};
+struct ufs_hba_variant_params {
+ struct devfreq_dev_profile devfreq_profile;
+ struct devfreq_simple_ondemand_data ondemand_data;
+ u16 hba_enable_delay_us;
+};
+
/**
* struct ufs_hba - per adapter private structure
* @mmio_base: UFSHCI base register address
@@ -663,6 +669,7 @@ struct ufs_hba {
int nutmrs;
u32 ufs_version;
const struct ufs_hba_variant_ops *vops;
+ struct ufs_hba_variant_params *vps;
void *priv;
unsigned int irq;
bool is_irq_enabled;
@@ -684,7 +691,6 @@ struct ufs_hba {
u32 eh_flags;
u32 intr_mask;
u16 ee_ctrl_mask;
- u16 hba_enable_delay_us;
bool is_powered;
/* Work Queues */
There are more and more customizable parameters showed up in UFS driver. Let's collect them into an unified place to make the driver more clean. Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> --- drivers/scsi/ufs/ufshcd.c | 38 +++++++++++++++----------------------- drivers/scsi/ufs/ufshcd.h | 8 +++++++- 2 files changed, 22 insertions(+), 24 deletions(-)