diff mbox series

[v2,3/4] arm64: dts: mediatek: Split PCIe node for MT2712/MT7622

Message ID 20200528061648.32078-4-chuanjia.liu@mediatek.com (mailing list archive)
State New, archived
Headers show
Series Spilt PCIe node to comply with hardware design | expand

Commit Message

Chuanjia Liu May 28, 2020, 6:16 a.m. UTC 
From: "chuanjia.liu" <Chuanjia.Liu@mediatek.com>

There are two independent PCIe controllers in MT2712/MT7622 platform,
and each of them should contain an independent MSI domain.

In current architecture, MSI domain will be inherited from the root
bridge, and all of the devices will share the same MSI domain.
Hence that, the PCIe devices will not work properly if the irq number
which required is more than 32.

Split the PCIe node for MT2712/MT7622 platform to fix MSI issue and
comply with the hardware design.

Signed-off-by: chuanjia.liu <Chuanjia.Liu@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt2712e.dtsi     | 75 +++++++++++--------
 .../dts/mediatek/mt7622-bananapi-bpi-r64.dts  | 16 ++--
 arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts  |  6 +-
 arch/arm64/boot/dts/mediatek/mt7622.dtsi      | 68 +++++++++++------
 4 files changed, 96 insertions(+), 69 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index 2cd8b33886e5..ab27ff4a869e 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -797,60 +797,73 @@ 
 		};
 	};
 
-	pcie: pcie@11700000 {
+	pcie1: pcie@112ff000 {
 		compatible = "mediatek,mt2712-pcie";
 		device_type = "pci";
-		reg = <0 0x11700000 0 0x1000>,
-		      <0 0x112ff000 0 0x1000>;
-		reg-names = "port0", "port1";
+		reg = <0 0x112ff000 0 0x1000>;
+		reg-names = "port1";
 		#address-cells = <3>;
 		#size-cells = <2>;
-		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>,
-			 <&topckgen CLK_TOP_PE2_MAC_P1_SEL>,
-			 <&pericfg CLK_PERI_PCIE0>,
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>,
 			 <&pericfg CLK_PERI_PCIE1>;
-		clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1";
-		phys = <&u3port0 PHY_TYPE_PCIE>, <&u3port1 PHY_TYPE_PCIE>;
-		phy-names = "pcie-phy0", "pcie-phy1";
+		clock-names = "sys_ck1", "ahb_ck1";
+		phys = <&u3port1 PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy1";
 		bus-range = <0x00 0xff>;
-		ranges = <0x82000000 0 0x20000000  0x0 0x20000000  0 0x10000000>;
+		ranges = <0x82000000 0 0x11400000  0x0 0x11400000  0 0x300000>;
+		status = "disabled";
 
-		pcie0: pcie@0,0 {
-			device_type = "pci";
-			status = "disabled";
-			reg = <0x0000 0 0 0 0>;
+		slot1: pcie@1,0 {
+			reg = <0x0800 0 0 0 0>;
 			#address-cells = <3>;
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges;
 			interrupt-map-mask = <0 0 0 7>;
-			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
-					<0 0 0 2 &pcie_intc0 1>,
-					<0 0 0 3 &pcie_intc0 2>,
-					<0 0 0 4 &pcie_intc0 3>;
-			pcie_intc0: interrupt-controller {
+			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+					<0 0 0 2 &pcie_intc1 1>,
+					<0 0 0 3 &pcie_intc1 2>,
+					<0 0 0 4 &pcie_intc1 3>;
+			pcie_intc1: interrupt-controller {
 				interrupt-controller;
 				#address-cells = <0>;
 				#interrupt-cells = <1>;
 			};
 		};
+	};
 
-		pcie1: pcie@1,0 {
-			device_type = "pci";
-			status = "disabled";
-			reg = <0x0800 0 0 0 0>;
+	pcie0: pcie@11700000 {
+		compatible = "mediatek,mt2712-pcie";
+		device_type = "pci";
+		reg = <0 0x11700000 0 0x1000>;
+		reg-names = "port0";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>,
+			 <&pericfg CLK_PERI_PCIE0>;
+		clock-names = "sys_ck0", "ahb_ck0";
+		phys = <&u3port0 PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy0";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>;
+		status = "disabled";
+
+		slot0: pcie@0,0 {
+			reg = <0x0000 0 0 0 0>;
 			#address-cells = <3>;
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges;
 			interrupt-map-mask = <0 0 0 7>;
-			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
-					<0 0 0 2 &pcie_intc1 1>,
-					<0 0 0 3 &pcie_intc1 2>,
-					<0 0 0 4 &pcie_intc1 3>;
-			pcie_intc1: interrupt-controller {
+			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+					<0 0 0 2 &pcie_intc0 1>,
+					<0 0 0 3 &pcie_intc0 2>,
+					<0 0 0 4 &pcie_intc0 3>;
+			pcie_intc0: interrupt-controller {
 				interrupt-controller;
 				#address-cells = <0>;
 				#interrupt-cells = <1>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
index 83e10591e0e5..7574d88cc46a 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -207,18 +207,16 @@ 
 	};
 };
 
-&pcie {
+&pcie0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pcie0_pins>, <&pcie1_pins>;
+	pinctrl-0 = <&pcie0_pins>;
 	status = "okay";
+};
 
-	pcie@0,0 {
-		status = "okay";
-	};
-
-	pcie@1,0 {
-		status = "okay";
-	};
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_pins>;
+	status = "okay";
 };
 
 &pio {
diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index 3f783348c66a..2e6b4e37cb7d 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -183,14 +183,10 @@ 
 	};
 };
 
-&pcie {
+&pcie0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie0_pins>;
 	status = "okay";
-
-	pcie@0,0 {
-		status = "okay";
-	};
 };
 
 &pio {
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 339dc9f88f43..d5131c8b6a79 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -766,45 +766,41 @@ 
 		#reset-cells = <1>;
 	};
 
-	pcie: pcie@1a140000 {
+	pciecfg: pciecfg@1a140000 {
+		compatible = "mediatek,mt7622-pciecfg", "syscon";
+		reg = <0 0x1a140000 0 0x1000>;
+	};
+
+	pcie0: pcie@1a143000 {
 		compatible = "mediatek,mt7622-pcie";
 		device_type = "pci";
-		reg = <0 0x1a140000 0 0x1000>,
-		      <0 0x1a143000 0 0x1000>,
-		      <0 0x1a145000 0 0x1000>;
-		reg-names = "subsys", "port0", "port1";
+		reg = <0 0x1a143000 0 0x1000>;
+		reg-names = "port0";
+		mediatek,pcie-cfg = <&pciecfg>;
 		#address-cells = <3>;
 		#size-cells = <2>;
-		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "pcie_irq";
 		clocks = <&pciesys CLK_PCIE_P0_MAC_EN>,
-			 <&pciesys CLK_PCIE_P1_MAC_EN>,
-			 <&pciesys CLK_PCIE_P0_AHB_EN>,
 			 <&pciesys CLK_PCIE_P0_AHB_EN>,
 			 <&pciesys CLK_PCIE_P0_AUX_EN>,
-			 <&pciesys CLK_PCIE_P1_AUX_EN>,
 			 <&pciesys CLK_PCIE_P0_AXI_EN>,
-			 <&pciesys CLK_PCIE_P1_AXI_EN>,
 			 <&pciesys CLK_PCIE_P0_OBFF_EN>,
-			 <&pciesys CLK_PCIE_P1_OBFF_EN>,
-			 <&pciesys CLK_PCIE_P0_PIPE_EN>,
-			 <&pciesys CLK_PCIE_P1_PIPE_EN>;
-		clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1",
-			      "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1",
-			      "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1";
+			 <&pciesys CLK_PCIE_P0_PIPE_EN>;
+		clock-names = "sys_ck0", "ahb_ck0", "aux_ck0",
+			      "axi_ck0", "obff_ck0", "pipe_ck0";
+
 		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
 		bus-range = <0x00 0xff>;
-		ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>;
+		ranges = <0x82000000 0 0x20000000  0x0 0x20000000  0 0x8000000>;
 		status = "disabled";
 
-		pcie0: pcie@0,0 {
+		slot0: pcie@0,0 {
 			reg = <0x0000 0 0 0 0>;
 			#address-cells = <3>;
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges;
-			status = "disabled";
-
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
 					<0 0 0 2 &pcie_intc0 1>,
@@ -816,15 +812,39 @@ 
 				#interrupt-cells = <1>;
 			};
 		};
+	};
 
-		pcie1: pcie@1,0 {
+	pcie1: pcie@1a145000 {
+		compatible = "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0 0x1a145000 0 0x1000>;
+		reg-names = "port1";
+		mediatek,pcie-cfg = <&pciecfg>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "pcie_irq";
+		clocks = <&pciesys CLK_PCIE_P1_MAC_EN>,
+			 /* designer has connect RC1 with p0_ahb clock */
+			 <&pciesys CLK_PCIE_P0_AHB_EN>,
+			 <&pciesys CLK_PCIE_P1_AUX_EN>,
+			 <&pciesys CLK_PCIE_P1_AXI_EN>,
+			 <&pciesys CLK_PCIE_P1_OBFF_EN>,
+			 <&pciesys CLK_PCIE_P1_PIPE_EN>;
+		clock-names = "sys_ck1", "ahb_ck1", "aux_ck1",
+			      "axi_ck1", "obff_ck1", "pipe_ck1";
+
+		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x28000000  0x0 0x28000000  0 0x8000000>;
+		status = "disabled";
+
+		slot1: pcie@1,0 {
 			reg = <0x0800 0 0 0 0>;
 			#address-cells = <3>;
 			#size-cells = <2>;
 			#interrupt-cells = <1>;
 			ranges;
-			status = "disabled";
-
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
 					<0 0 0 2 &pcie_intc1 1>,