diff mbox series

[4/4] iommu/mediatek: check 4GB mode by reading infracfg

Message ID 20200702093721.6063-4-miles.chen@mediatek.com (mailing list archive)
State New, archived
Headers show
Series [1/4] dt-bindings: mediatek: add mediatek,infracfg phandle | expand

Commit Message

Miles Chen July 2, 2020, 9:37 a.m. UTC
In previous disscusion [1] and [2], we found that it is risky to
use max_pfn or totalram_pages to tell if 4GB mode is enabled.

Check 4GB mode by reading infracfg register, remove the usage
of the unexported symbol max_pfn.

[1] https://lkml.org/lkml/2020/6/3/733
[2] https://lkml.org/lkml/2020/6/4/136

Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yong Wu <yong.wu@mediatek.com>
Cc: Yingjoe Chen <yingjoe.chen@mediatek.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
---
 drivers/iommu/mtk_iommu.c | 22 ++++++++++++++++++----
 1 file changed, 18 insertions(+), 4 deletions(-)

Comments

Matthias Brugger July 15, 2020, 9:05 p.m. UTC | #1
On 02/07/2020 11:37, Miles Chen wrote:
> In previous disscusion [1] and [2], we found that it is risky to
> use max_pfn or totalram_pages to tell if 4GB mode is enabled.
> 
> Check 4GB mode by reading infracfg register, remove the usage
> of the unexported symbol max_pfn.
> 
> [1] https://lkml.org/lkml/2020/6/3/733
> [2] https://lkml.org/lkml/2020/6/4/136
> 
> Cc: Mike Rapoport <rppt@linux.ibm.com>
> Cc: David Hildenbrand <david@redhat.com>
> Cc: Yong Wu <yong.wu@mediatek.com>
> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com>
> Cc: Christoph Hellwig <hch@lst.de>
> Signed-off-by: Miles Chen <miles.chen@mediatek.com>
> ---
>   drivers/iommu/mtk_iommu.c | 22 ++++++++++++++++++----
>   1 file changed, 18 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index 2be96f1cdbd2..09be57bd8d74 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -3,7 +3,6 @@
>    * Copyright (c) 2015-2016 MediaTek Inc.
>    * Author: Yong Wu <yong.wu@mediatek.com>
>    */
> -#include <linux/memblock.h>
>   #include <linux/bug.h>
>   #include <linux/clk.h>
>   #include <linux/component.h>
> @@ -15,11 +14,13 @@
>   #include <linux/iommu.h>
>   #include <linux/iopoll.h>
>   #include <linux/list.h>
> +#include <linux/mfd/syscon.h>
>   #include <linux/of_address.h>
>   #include <linux/of_iommu.h>
>   #include <linux/of_irq.h>
>   #include <linux/of_platform.h>
>   #include <linux/platform_device.h>
> +#include <linux/regmap.h>
>   #include <linux/slab.h>
>   #include <linux/spinlock.h>
>   #include <asm/barrier.h>
> @@ -91,6 +92,9 @@
>   #define F_MMU_INT_ID_LARB_ID(a)			(((a) >> 7) & 0x7)
>   #define F_MMU_INT_ID_PORT_ID(a)			(((a) >> 2) & 0x1f)
>   
> +#define REG_INFRA_MISC				0xf00
> +#define F_DDR_4GB_SUPPORT_EN			BIT(13)
> +

As this is used for infracfg, I think it would be good to add it to 
include/linux/soc/mediatek/infracfg.h and include that file here.

>   #define MTK_PROTECT_PA_ALIGN			128
>   
>   /*
> @@ -599,8 +603,10 @@ static int mtk_iommu_probe(struct platform_device *pdev)
>   	struct resource         *res;
>   	resource_size_t		ioaddr;
>   	struct component_match  *match = NULL;
> +	struct regmap		*infracfg_regmap;

Maybe call it just infracfg.

>   	void                    *protect;
>   	int                     i, larb_nr, ret;
> +	u32			val;
>   
>   	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
>   	if (!data)
> @@ -614,10 +620,18 @@ static int mtk_iommu_probe(struct platform_device *pdev)
>   		return -ENOMEM;
>   	data->protect_base = ALIGN(virt_to_phys(protect), MTK_PROTECT_PA_ALIGN);
>   
> -	/* Whether the current dram is over 4GB */
> -	data->enable_4GB = !!(max_pfn > (BIT_ULL(32) >> PAGE_SHIFT));
> -	if (!data->plat_data->has_4gb_mode)
> +	if (data->plat_data->has_4gb_mode) {
> +		infracfg_regmap = syscon_regmap_lookup_by_phandle(dev->of_node,
> +				"mediatek,infracfg");
> +		if (IS_ERR(infracfg_regmap))
> +			return PTR_ERR(infracfg_regmap);

Do we need to error out, or could we be conservative and set endable_4GB = false?

> +		ret = regmap_read(infracfg_regmap, REG_INFRA_MISC, &val);
> +		if (ret)
> +			return ret;
> +		data->enable_4GB = !!(val & F_DDR_4GB_SUPPORT_EN);
> +	} else {
>   		data->enable_4GB = false;

Move that before the if() and update enable_4GB only in case of has_4gb_mode.

> +	}
>   
>   	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>   	data->base = devm_ioremap_resource(dev, res);
>
Miles Chen July 17, 2020, 8:26 a.m. UTC | #2
On Wed, 2020-07-15 at 23:05 +0200, Matthias Brugger wrote:
> 
> On 02/07/2020 11:37, Miles Chen wrote:
> > In previous disscusion [1] and [2], we found that it is risky to
> > use max_pfn or totalram_pages to tell if 4GB mode is enabled.
> > 
> > Check 4GB mode by reading infracfg register, remove the usage
> > of the unexported symbol max_pfn.
> > 
> > [1] https://urldefense.com/v3/__https://lkml.org/lkml/2020/6/3/733__;!!CTRNKA9wMg0ARbw!16gAfVnSY87W4t5kE4iw20QPxBgS_SHBvPKlePKU7CGIb18nUzuRUjHumcf4oYVhIQ$ 
> > [2] https://urldefense.com/v3/__https://lkml.org/lkml/2020/6/4/136__;!!CTRNKA9wMg0ARbw!16gAfVnSY87W4t5kE4iw20QPxBgS_SHBvPKlePKU7CGIb18nUzuRUjHumcfr4i9p5g$ 
> > 
> > Cc: Mike Rapoport <rppt@linux.ibm.com>
> > Cc: David Hildenbrand <david@redhat.com>
> > Cc: Yong Wu <yong.wu@mediatek.com>
> > Cc: Yingjoe Chen <yingjoe.chen@mediatek.com>
> > Cc: Christoph Hellwig <hch@lst.de>
> > Signed-off-by: Miles Chen <miles.chen@mediatek.com>
> > ---
> >   drivers/iommu/mtk_iommu.c | 22 ++++++++++++++++++----
> >   1 file changed, 18 insertions(+), 4 deletions(-)
> > 
> > diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> > index 2be96f1cdbd2..09be57bd8d74 100644
> > --- a/drivers/iommu/mtk_iommu.c
> > +++ b/drivers/iommu/mtk_iommu.c
> > @@ -3,7 +3,6 @@
> >    * Copyright (c) 2015-2016 MediaTek Inc.
> >    * Author: Yong Wu <yong.wu@mediatek.com>
> >    */
> > -#include <linux/memblock.h>
> >   #include <linux/bug.h>
> >   #include <linux/clk.h>
> >   #include <linux/component.h>
> > @@ -15,11 +14,13 @@
> >   #include <linux/iommu.h>
> >   #include <linux/iopoll.h>
> >   #include <linux/list.h>
> > +#include <linux/mfd/syscon.h>
> >   #include <linux/of_address.h>
> >   #include <linux/of_iommu.h>
> >   #include <linux/of_irq.h>
> >   #include <linux/of_platform.h>
> >   #include <linux/platform_device.h>
> > +#include <linux/regmap.h>
> >   #include <linux/slab.h>
> >   #include <linux/spinlock.h>
> >   #include <asm/barrier.h>
> > @@ -91,6 +92,9 @@
> >   #define F_MMU_INT_ID_LARB_ID(a)			(((a) >> 7) & 0x7)
> >   #define F_MMU_INT_ID_PORT_ID(a)			(((a) >> 2) & 0x1f)
> >   
> > +#define REG_INFRA_MISC				0xf00
> > +#define F_DDR_4GB_SUPPORT_EN			BIT(13)
> > +
> 
> As this is used for infracfg, I think it would be good to add it to 
> include/linux/soc/mediatek/infracfg.h and include that file here.
Thanks for your comment.

ok. I'll do this in next version.
> 
> >   #define MTK_PROTECT_PA_ALIGN			128
> >   
> >   /*
> > @@ -599,8 +603,10 @@ static int mtk_iommu_probe(struct platform_device *pdev)
> >   	struct resource         *res;
> >   	resource_size_t		ioaddr;
> >   	struct component_match  *match = NULL;
> > +	struct regmap		*infracfg_regmap;
> 
> Maybe call it just infracfg.

ok. I'll do this in next version. 
> 
> >   	void                    *protect;
> >   	int                     i, larb_nr, ret;
> > +	u32			val;
> >   
> >   	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> >   	if (!data)
> > @@ -614,10 +620,18 @@ static int mtk_iommu_probe(struct platform_device *pdev)
> >   		return -ENOMEM;
> >   	data->protect_base = ALIGN(virt_to_phys(protect), MTK_PROTECT_PA_ALIGN);
> >   
> > -	/* Whether the current dram is over 4GB */
> > -	data->enable_4GB = !!(max_pfn > (BIT_ULL(32) >> PAGE_SHIFT));
> > -	if (!data->plat_data->has_4gb_mode)
> > +	if (data->plat_data->has_4gb_mode) {
> > +		infracfg_regmap = syscon_regmap_lookup_by_phandle(dev->of_node,
> > +				"mediatek,infracfg");
> > +		if (IS_ERR(infracfg_regmap))
> > +			return PTR_ERR(infracfg_regmap);
> 
> Do we need to error out, or could we be conservative and set endable_4GB = false?

We have to error out in this case because the 4gb_mode setting must be
consistent with the h/w setting.

> 
> > +		ret = regmap_read(infracfg_regmap, REG_INFRA_MISC, &val);
> > +		if (ret)
> > +			return ret;
> > +		data->enable_4GB = !!(val & F_DDR_4GB_SUPPORT_EN);
> > +	} else {
> >   		data->enable_4GB = false;
> 
> Move that before the if() and update enable_4GB only in case of has_4gb_mode.

ok. I'll do this in next version.

Miles
> 
> > +	}
> >   
> >   	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> >   	data->base = devm_ioremap_resource(dev, res);
> >
diff mbox series

Patch

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 2be96f1cdbd2..09be57bd8d74 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -3,7 +3,6 @@ 
  * Copyright (c) 2015-2016 MediaTek Inc.
  * Author: Yong Wu <yong.wu@mediatek.com>
  */
-#include <linux/memblock.h>
 #include <linux/bug.h>
 #include <linux/clk.h>
 #include <linux/component.h>
@@ -15,11 +14,13 @@ 
 #include <linux/iommu.h>
 #include <linux/iopoll.h>
 #include <linux/list.h>
+#include <linux/mfd/syscon.h>
 #include <linux/of_address.h>
 #include <linux/of_iommu.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
+#include <linux/regmap.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <asm/barrier.h>
@@ -91,6 +92,9 @@ 
 #define F_MMU_INT_ID_LARB_ID(a)			(((a) >> 7) & 0x7)
 #define F_MMU_INT_ID_PORT_ID(a)			(((a) >> 2) & 0x1f)
 
+#define REG_INFRA_MISC				0xf00
+#define F_DDR_4GB_SUPPORT_EN			BIT(13)
+
 #define MTK_PROTECT_PA_ALIGN			128
 
 /*
@@ -599,8 +603,10 @@  static int mtk_iommu_probe(struct platform_device *pdev)
 	struct resource         *res;
 	resource_size_t		ioaddr;
 	struct component_match  *match = NULL;
+	struct regmap		*infracfg_regmap;
 	void                    *protect;
 	int                     i, larb_nr, ret;
+	u32			val;
 
 	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
 	if (!data)
@@ -614,10 +620,18 @@  static int mtk_iommu_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	data->protect_base = ALIGN(virt_to_phys(protect), MTK_PROTECT_PA_ALIGN);
 
-	/* Whether the current dram is over 4GB */
-	data->enable_4GB = !!(max_pfn > (BIT_ULL(32) >> PAGE_SHIFT));
-	if (!data->plat_data->has_4gb_mode)
+	if (data->plat_data->has_4gb_mode) {
+		infracfg_regmap = syscon_regmap_lookup_by_phandle(dev->of_node,
+				"mediatek,infracfg");
+		if (IS_ERR(infracfg_regmap))
+			return PTR_ERR(infracfg_regmap);
+		ret = regmap_read(infracfg_regmap, REG_INFRA_MISC, &val);
+		if (ret)
+			return ret;
+		data->enable_4GB = !!(val & F_DDR_4GB_SUPPORT_EN);
+	} else {
 		data->enable_4GB = false;
+	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	data->base = devm_ioremap_resource(dev, res);