diff mbox series

[v2,07/12] soc: mediatek: pm-domains: Add extra sram control

Message ID 20201001160154.3587848-8-enric.balletbo@collabora.com (mailing list archive)
State New, archived
Headers show
Series soc: mediatek: pm-domains: Add new driver for SCPSYS power domains controller | expand

Commit Message

Enric Balletbo i Serra Oct. 1, 2020, 4:01 p.m. UTC
From: Matthias Brugger <mbrugger@suse.com>

For some power domains like vpu_core on MT8183 whose sram need to do clock
and internal isolation while power on/off sram. We add a cap
"MTK_SCPD_SRAM_ISO" to judge if we need to do the extra sram isolation
control or not.

Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---

Changes in v2:
- Nit, split readl(ctl_addr) | pd->data->sram_pdn_bits in two lines.
- Use regmap API

 drivers/soc/mediatek/mtk-pm-domains.c | 30 +++++++++++++++++++++++++--
 1 file changed, 28 insertions(+), 2 deletions(-)

Comments

Matthias Brugger Oct. 2, 2020, 9:24 a.m. UTC | #1
On 01/10/2020 18:01, Enric Balletbo i Serra wrote:
> From: Matthias Brugger <mbrugger@suse.com>
> 
> For some power domains like vpu_core on MT8183 whose sram need to do clock
> and internal isolation while power on/off sram. We add a cap
> "MTK_SCPD_SRAM_ISO" to judge if we need to do the extra sram isolation
> control or not.
> 
> Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> ---
> 
> Changes in v2:
> - Nit, split readl(ctl_addr) | pd->data->sram_pdn_bits in two lines.

Nit: si was done in 2/12 :)

Regards,
Matthias
diff mbox series

Patch

diff --git a/drivers/soc/mediatek/mtk-pm-domains.c b/drivers/soc/mediatek/mtk-pm-domains.c
index 38f2630bdd0a..e0a52d489fea 100644
--- a/drivers/soc/mediatek/mtk-pm-domains.c
+++ b/drivers/soc/mediatek/mtk-pm-domains.c
@@ -21,6 +21,7 @@ 
 
 #define MTK_SCPD_ACTIVE_WAKEUP		BIT(0)
 #define MTK_SCPD_FWAIT_SRAM		BIT(1)
+#define MTK_SCPD_SRAM_ISO		BIT(2)
 #define MTK_SCPD_CAPS(_scpd, _x)	((_scpd)->data->caps & (_x))
 
 #define SPM_VDE_PWR_CON			0x0210
@@ -42,6 +43,8 @@ 
 #define PWR_ON_BIT			BIT(2)
 #define PWR_ON_2ND_BIT			BIT(3)
 #define PWR_CLK_DIS_BIT			BIT(4)
+#define PWR_SRAM_CLKISO_BIT		BIT(5)
+#define PWR_SRAM_ISOINT_B_BIT		BIT(6)
 
 #define PWR_STATUS_DISP			BIT(3)
 #define PWR_STATUS_MFG			BIT(4)
@@ -155,14 +158,28 @@  static int scpsys_sram_enable(struct scpsys_domain *pd)
 	struct scpsys *scpsys = pd->scpsys;
 	u32 val;
 	int tmp;
+	int ret;
 
 	regmap_read(scpsys->base, pd->data->ctl_offs, &val);
 	val &= ~pd->data->sram_pdn_bits;
 	regmap_write(scpsys->base, pd->data->ctl_offs, val);
 
 	/* Either wait until SRAM_PDN_ACK all 1 or 0 */
-	return regmap_read_poll_timeout(scpsys->base, pd->data->ctl_offs, tmp,
-					(tmp & pdn_ack) == 0, MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
+	ret = regmap_read_poll_timeout(scpsys->base, pd->data->ctl_offs, tmp,
+				       (tmp & pdn_ack) == 0, MTK_POLL_DELAY_US, MTK_POLL_TIMEOUT);
+	if (ret < 0)
+		return ret;
+
+	if (MTK_SCPD_CAPS(pd, MTK_SCPD_SRAM_ISO)) {
+		regmap_read(scpsys->base, pd->data->ctl_offs, &val);
+		val |= PWR_SRAM_ISOINT_B_BIT;
+		regmap_write(scpsys->base, pd->data->ctl_offs, val);
+		udelay(1);
+		val &= ~PWR_SRAM_CLKISO_BIT;
+		regmap_write(scpsys->base, pd->data->ctl_offs, val);
+	}
+
+	return 0;
 }
 
 static int scpsys_sram_disable(struct scpsys_domain *pd)
@@ -172,6 +189,15 @@  static int scpsys_sram_disable(struct scpsys_domain *pd)
 	u32 val;
 	int tmp;
 
+	if (MTK_SCPD_CAPS(pd, MTK_SCPD_SRAM_ISO)) {
+		regmap_read(scpsys->base, pd->data->ctl_offs, &val);
+		val |= PWR_SRAM_CLKISO_BIT;
+		regmap_write(scpsys->base, pd->data->ctl_offs, val);
+		val &= ~PWR_SRAM_ISOINT_B_BIT;
+		regmap_write(scpsys->base, pd->data->ctl_offs, val);
+		udelay(1);
+	}
+
 	regmap_read(scpsys->base, pd->data->ctl_offs, &val);
 	val |= pd->data->sram_pdn_bits;
 	regmap_write(scpsys->base, pd->data->ctl_offs, val);