From patchwork Wed Oct 14 01:44:32 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: =?utf-8?b?Q2h1bmZlbmcgWXVuICjkupHmmKXls7Ap?= X-Patchwork-Id: 11836629 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 722DF61C for ; Wed, 14 Oct 2020 01:51:57 +0000 (UTC) Received: from merlin.infradead.org (merlin.infradead.org [205.233.59.134]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id DE2EA21D7B for ; Wed, 14 Oct 2020 01:51:56 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="XdYq/P/i"; dkim=fail reason="signature verification failed" (1024-bit key) header.d=mediatek.com header.i=@mediatek.com header.b="sAbHXso8" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org DE2EA21D7B Authentication-Results: mail.kernel.org; dmarc=fail (p=none dis=none) header.from=mediatek.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-mediatek-bounces+patchwork-linux-mediatek=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=merlin.20170209; h=Sender:Content-Transfer-Encoding: Content-Type:Cc:List-Subscribe:List-Help:List-Post:List-Archive: List-Unsubscribe:List-Id:MIME-Version:References:In-Reply-To:Message-ID:Date: Subject:To:From:Reply-To:Content-ID:Content-Description:Resent-Date: Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=nvNLQ6hVKfcJuyt3Ogb8IvD4I1u5TW7xtS7o7Jo16C4=; b=XdYq/P/iz84ter6IgtNhv9/ax LDOUx/s46fExG+14x/b632PXlmil4dAH3xpKNQat+xPWOrkCaRyXnCdLZEpEDevNWGhi7zMBJplgt kvzSxhWO3tjsj+On9JlQxLAMFAETtgucU2hAGsObu/NyHDZGHeNh0OY5PB76sXZyp9bV/PSvIzgUa HtBrrtH+9ZHkFoTPJTgbn71RtLBQHFYe9D89UrXm9s8wQaQiIcRJkH21QCerFWHwKZbpFcCqChOv9 4BUQ82Iii6r1rsl0L2JRterwL6zK2DF2v/rI2UFs92gsrTp/PJCO9rQGMliCGBw/HaPSGEMBeDaFx W2eOGWPEw==; Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1kSVxK-0008Hi-Tt; Wed, 14 Oct 2020 01:51:54 +0000 Received: from mailgw01.mediatek.com ([216.200.240.184]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1kSVxH-0008DR-0l for linux-mediatek@lists.infradead.org; Wed, 14 Oct 2020 01:51:52 +0000 X-UUID: 724b665aebc646d6adb77891c7fae3ff-20201013 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=mediatek.com; s=dk; h=Content-Transfer-Encoding:Content-Type:MIME-Version:References:In-Reply-To:Message-ID:Date:Subject:CC:To:From; bh=T4VkQOxj22dU5Q9Aqm4nbQZ8QC1woK+XWwRhFTeSle4=; b=sAbHXso8VLDVmlW1fOnv7ftIYO0Sj1YCVNK1NUo3dMq4AkMyNRpfTNxhuO2DoXTWHylIC3KXklbr0S4hCw7qkQALffLXQLiWec/w57bUNnHykcyrES3bqoZQKpwokanL6/vRH0xAVJf8VoG92i9z2lj0FGaepnuMr5gKnxCmwi0=; X-UUID: 724b665aebc646d6adb77891c7fae3ff-20201013 Received: from mtkcas66.mediatek.inc [(172.29.193.44)] by mailgw01.mediatek.com (envelope-from ) (musrelay.mediatek.com ESMTP with TLSv1.2 ECDHE-RSA-AES256-SHA384 256/256) with ESMTP id 377688631; Tue, 13 Oct 2020 17:51:43 -0800 Received: from mtkmbs07n1.mediatek.inc (172.21.101.16) by MTKMBS62N2.mediatek.inc (172.29.193.42) with Microsoft SMTP Server (TLS) id 15.0.1497.2; Tue, 13 Oct 2020 18:44:51 -0700 Received: from mtkcas08.mediatek.inc (172.21.101.126) by mtkmbs07n1.mediatek.inc (172.21.101.16) with Microsoft SMTP Server (TLS) id 15.0.1497.2; Wed, 14 Oct 2020 09:44:41 +0800 Received: from mtkslt301.mediatek.inc (10.21.14.114) by mtkcas08.mediatek.inc (172.21.101.73) with Microsoft SMTP Server id 15.0.1497.2 via Frontend Transport; Wed, 14 Oct 2020 09:44:42 +0800 From: Chunfeng Yun To: Subject: [PATCH v2 6/8] dt-bindings: usb: convert mediatek, mtk-xhci.txt to YAML schema Date: Wed, 14 Oct 2020 09:44:32 +0800 Message-ID: <20201014014434.62239-6-chunfeng.yun@mediatek.com> X-Mailer: git-send-email 2.18.0 In-Reply-To: <20201014014434.62239-1-chunfeng.yun@mediatek.com> References: <20201014014434.62239-1-chunfeng.yun@mediatek.com> MIME-Version: 1.0 X-MTK: N X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20201013_215151_263313_1EAAC9DF X-CRM114-Status: GOOD ( 22.04 ) X-Spam-Score: -0.2 (/) X-Spam-Report: SpamAssassin version 3.4.4 on merlin.infradead.org summary: Content analysis details: (-0.2 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 SPF_PASS SPF: sender matches SPF record 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record 0.0 MIME_BASE64_TEXT RAW: Message text disguised using base64 encoding -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature -0.1 DKIM_VALID_EF Message has a valid DKIM or DK signature from envelope-from domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain 0.0 UNPARSEABLE_RELAY Informational: message has unparseable relay lines X-BeenThere: linux-mediatek@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Chunfeng Yun , srv_heupstream@mediatek.com Sender: "Linux-mediatek" Errors-To: linux-mediatek-bounces+patchwork-linux-mediatek=patchwork.kernel.org@lists.infradead.org Convert mediatek,mtk-xhci.txt to YAML schema mediatek,mtk-xhci.yaml Signed-off-by: Chunfeng Yun --- v2: new patch --- .../bindings/usb/mediatek,mtk-xhci.txt | 121 ------------ .../bindings/usb/mediatek,mtk-xhci.yaml | 180 ++++++++++++++++++ 2 files changed, 180 insertions(+), 121 deletions(-) delete mode 100644 Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt create mode 100644 Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt deleted file mode 100644 index 42d8814f903a..000000000000 --- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt +++ /dev/null @@ -1,121 +0,0 @@ -MT8173 xHCI - -The device node for Mediatek SOC USB3.0 host controller - -There are two scenarios: the first one only supports xHCI driver; -the second one supports dual-role mode, and the host is based on xHCI -driver. Take account of backward compatibility, we divide bindings -into two parts. - -1st: only supports xHCI driver ------------------------------------------------------------------------- - -Required properties: - - compatible : should be "mediatek,-xhci", "mediatek,mtk-xhci", - soc-model is the name of SoC, such as mt8173, mt2712 etc, when using - "mediatek,mtk-xhci" compatible string, you need SoC specific ones in - addition, one of: - - "mediatek,mt8173-xhci" - - reg : specifies physical base address and size of the registers - - reg-names: should be "mac" for xHCI MAC and "ippc" for IP port control - - interrupts : interrupt used by the controller - - power-domains : a phandle to USB power domain node to control USB's - mtcmos - - vusb33-supply : regulator of USB avdd3.3v - - - clocks : a list of phandle + clock-specifier pairs, one for each - entry in clock-names - - clock-names : must contain - "sys_ck": controller clock used by normal mode, - the following ones are optional: - "ref_ck": reference clock used by low power mode etc, - "mcu_ck": mcu_bus clock for register access, - "dma_ck": dma_bus clock for data transfer by DMA, - "xhci_ck": controller clock - - - phys : see usb-hcd.yaml in the current directory - -Optional properties: - - wakeup-source : enable USB remote wakeup; - - mediatek,syscon-wakeup : phandle to syscon used to access the register - of the USB wakeup glue layer between xHCI and SPM; it depends on - "wakeup-source", and has two arguments: - - the first one : register base address of the glue layer in syscon; - - the second one : hardware version of the glue layer - - 1 : used by mt8173 etc - - 2 : used by mt2712 etc - - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0, - bit1 for u3port1, ... etc; - - vbus-supply : reference to the VBUS regulator; - - usb3-lpm-capable : supports USB3.0 LPM - - pinctrl-names : a pinctrl state named "default" must be defined - - pinctrl-0 : pin control group - See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - - imod-interval-ns: default interrupt moderation interval is 5000ns - -additionally the properties from usb-hcd.yaml (in the current directory) are -supported. - -Example: -usb30: usb@11270000 { - compatible = "mediatek,mt8173-xhci"; - reg = <0 0x11270000 0 0x1000>, - <0 0x11280700 0 0x0100>; - reg-names = "mac", "ippc"; - interrupts = ; - power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; - clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>, - <&pericfg CLK_PERI_USB0>, - <&pericfg CLK_PERI_USB1>; - clock-names = "sys_ck", "ref_ck"; - phys = <&phy_port0 PHY_TYPE_USB3>, - <&phy_port1 PHY_TYPE_USB2>; - vusb33-supply = <&mt6397_vusb_reg>; - vbus-supply = <&usb_p1_vbus>; - usb3-lpm-capable; - mediatek,syscon-wakeup = <&pericfg 0x400 1>; - wakeup-source; - imod-interval-ns = <10000>; -}; - -2nd: dual-role mode with xHCI driver ------------------------------------------------------------------------- - -In the case, xhci is added as subnode to mtu3. An example and the DT binding -details of mtu3 can be found in: -Documentation/devicetree/bindings/usb/mediatek,mtu3.txt - -Required properties: - - compatible : should be "mediatek,-xhci", "mediatek,mtk-xhci", - soc-model is the name of SoC, such as mt8173, mt2712 etc, when using - "mediatek,mtk-xhci" compatible string, you need SoC specific ones in - addition, one of: - - "mediatek,mt8173-xhci" - - reg : specifies physical base address and size of the registers - - reg-names: should be "mac" for xHCI MAC - - interrupts : interrupt used by the host controller - - power-domains : a phandle to USB power domain node to control USB's - mtcmos - - vusb33-supply : regulator of USB avdd3.3v - - - clocks : a list of phandle + clock-specifier pairs, one for each - entry in clock-names - - clock-names : must contain "sys_ck", and the following ones are optional: - "ref_ck", "mcu_ck" and "dma_ck", "xhci_ck" - -Optional properties: - - vbus-supply : reference to the VBUS regulator; - - usb3-lpm-capable : supports USB3.0 LPM - -Example: -usb30: usb@11270000 { - compatible = "mediatek,mt8173-xhci"; - reg = <0 0x11270000 0 0x1000>; - reg-names = "mac"; - interrupts = ; - power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; - clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>; - clock-names = "sys_ck", "ref_ck"; - vusb33-supply = <&mt6397_vusb_reg>; - usb3-lpm-capable; -}; diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml new file mode 100644 index 000000000000..ea696c8f1269 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml @@ -0,0 +1,180 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 MediaTek +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/mediatek,mtk-xhci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek USB3 xHCI Device Tree Bindings + +maintainers: + - Chunfeng Yun + +allOf: + - $ref: "usb-hcd.yaml" + +description: | + There are two scenarios: + case 1: only supports xHCI driver; + case 2: supports dual-role mode, and the host is based on xHCI driver. + +properties: + #common properties for both case 1 and case 2 + compatible: + items: + - enum: + - mediatek,mt2712-xhci + - mediatek,mt7622-xhci + - mediatek,mt7629-xhci + - mediatek,mt8173-xhci + - mediatek,mt8183-xhci + - const: mediatek,mtk-xhci + + reg: + minItems: 1 + maxItems: 2 + items: + - description: the registers of xHCI MAC + - description: the registers of IP Port Control + + reg-names: + minItems: 1 + maxItems: 2 + items: + - const: mac + - const: ippc #optional, only needed for case 1. + + interrupts: + maxItems: 1 + + power-domains: + description: A phandle to USB power domain node to control USB's MTCMOS + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 5 + items: + - description: Controller clock used by normal mode + - description: Reference clock used by low power mode etc + - description: Mcu bus clock for register access + - description: DMA bus clock for data transfer + - description: controller clock + + clock-names: + minItems: 1 + maxItems: 5 + items: + - const: sys_ck #required, the following ones are optional + - const: ref_ck + - const: mcu_ck + - const: dma_ck + - const: xhci_ck + + phys: + $ref: /usb/usb-hcd.yaml# + + vusb33-supply: + description: Regulator of USB AVDD3.3v + + vbus-supply: + description: Regulator of USB VBUS5v + + usb3-lpm-capable: + description: supports USB3.0 LPM + type: boolean + + imod-interval-ns: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Interrupt moderation interval value, it is 8 times as much as that + defined in the xHCI spec on MTK's controller. + default: 5000 + + #the following properties are only used for case 1 + pinctrl-0: + description: A phandle to the default pinctrl state. + + pinctrl-names: + description: A pinctrl state named "default" must be defined. + See pinctrl/pinctrl-bindings.txt + const: default + + wakeup-source: + description: enable USB remote wakeup, see power/wakeup-source.txt + type: boolean + + mediatek,syscon-wakeup: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + description: | + A phandle to syscon used to access the register of the USB wakeup glue + layer between xHCI and SPM, the field should always be a multiple of + 3 cells long. + + items: + - description: + The first cell represents a phandle to syscon + - description: + The second cell represents the register base address of the glue + layer in syscon + - description: + The third cell represents the hardware version of the glue layer, + 1 is used by mt8173 etc, 2 is used by mt2712 etc + enum: [1, 2] + + mediatek,u3p-dis-msk: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The mask to disable u3ports, bit0 for u3port0, + bit1 for u3port1, ... etc + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^[a-f]+@[0-9a-f]+$": + $ref: /usb/usb-hcd.yaml# + type: object + description: The hard wired USB devices. + +dependencies: + wakeup-source: [ 'mediatek,syscon-wakeup' ] + +required: + - compatible + - reg + - reg-names + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include + #include + #include + #include + #include + + usb3: usb@11270000 { + compatible = "mediatek,mt8173-xhci", "mediatek,mtk-xhci"; + reg = <0x11270000 0x1000>, <0x11280700 0x0100>; + reg-names = "mac", "ippc"; + interrupts = ; + power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; + clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>; + clock-names = "sys_ck", "ref_ck"; + phys = <&u3port0 PHY_TYPE_USB3>, <&u2port1 PHY_TYPE_USB2>; + vusb33-supply = <&mt6397_vusb_reg>; + vbus-supply = <&usb_p1_vbus>; + imod-interval-ns = <10000>; + mediatek,syscon-wakeup = <&pericfg 0x400 1>; + wakeup-source; + usb3-lpm-capable; + }; +...