diff mbox series

[v2,1/5] dt-bindings: media: mtk-vcodec: Add dma-ranges property

Message ID 20210312075542.5503-2-irui.wang@mediatek.com (mailing list archive)
State New, archived
Headers show
Series Support H264 4K on MT8192 | expand

Commit Message

Irui Wang March 12, 2021, 7:55 a.m. UTC
The mt8192 iommu support 0~16GB iova. We separate it to four banks:
0~4G; 4G~8G; 8G~12G; 12G~16G.

The "dma-ranges" could be used to adjust the bank we locate.
If we don't set this property. The default range always is 0~4G.

Here we don't have actual bus/parent concept here.  And the iova
requirement is for our HW. Thus put the property in our node.

Signed-off-by: Irui Wang <irui.wang@mediatek.com>
---
 Documentation/devicetree/bindings/media/mediatek-vcodec.txt | 2 ++
 1 file changed, 2 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
index 8318f0ed492d..d852683d3e6f 100644
--- a/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
+++ b/Documentation/devicetree/bindings/media/mediatek-vcodec.txt
@@ -22,6 +22,8 @@  Required properties:
 - iommus : should point to the respective IOMMU block with master port as
   argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
   for details.
+- dma-ranges : describes how the physical address space of the IOMMU maps
+  to memory.
 One of the two following nodes:
 - mediatek,vpu : the node of the video processor unit, if using VPU.
 - mediatek,scp : the node of the SCP unit, if using SCP.