diff mbox series

[net-next,3/4] dt-bindings: net: dsa: add MT7530 interrupt controller binding

Message ID 20210429062130.29403-4-dqfext@gmail.com (mailing list archive)
State New, archived
Headers show
Series MT7530 interrupt support | expand

Commit Message

Qingfang Deng April 29, 2021, 6:21 a.m. UTC
Add device tree binding to support MT7530 interrupt controller.

Signed-off-by: DENG Qingfang <dqfext@gmail.com>
---
RFC v4 -> PATCH v1:
- No changes.

 Documentation/devicetree/bindings/net/dsa/mt7530.txt | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Andrew Lunn April 29, 2021, 9:30 p.m. UTC | #1
On Thu, Apr 29, 2021 at 02:21:29PM +0800, DENG Qingfang wrote:
> Add device tree binding to support MT7530 interrupt controller.
> 
> Signed-off-by: DENG Qingfang <dqfext@gmail.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
Florian Fainelli April 29, 2021, 11:31 p.m. UTC | #2
On 4/28/2021 11:21 PM, DENG Qingfang wrote:
> Add device tree binding to support MT7530 interrupt controller.
> 
> Signed-off-by: DENG Qingfang <dqfext@gmail.com>
> ---
> RFC v4 -> PATCH v1:
> - No changes.
> 
>  Documentation/devicetree/bindings/net/dsa/mt7530.txt | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
> index de04626a8e9d..892b1570c496 100644
> --- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt
> +++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
> @@ -81,6 +81,12 @@ Optional properties:
>  - gpio-controller: Boolean; if defined, MT7530's LED controller will run on
>  	GPIO mode.
>  - #gpio-cells: Must be 2 if gpio-controller is defined.
> +- interrupt-controller: Boolean; Enables the internal interrupt controller.
> +
> +If interrupt-controller is defined, the following property is required.

s/is/are/

It would be good to follow up with a converstion of this binding file to
YAML eventually.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Rob Herring May 3, 2021, 7:35 p.m. UTC | #3
On Thu, 29 Apr 2021 14:21:29 +0800, DENG Qingfang wrote:
> Add device tree binding to support MT7530 interrupt controller.
> 
> Signed-off-by: DENG Qingfang <dqfext@gmail.com>
> ---
> RFC v4 -> PATCH v1:
> - No changes.
> 
>  Documentation/devicetree/bindings/net/dsa/mt7530.txt | 6 ++++++
>  1 file changed, 6 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/dsa/mt7530.txt b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
index de04626a8e9d..892b1570c496 100644
--- a/Documentation/devicetree/bindings/net/dsa/mt7530.txt
+++ b/Documentation/devicetree/bindings/net/dsa/mt7530.txt
@@ -81,6 +81,12 @@  Optional properties:
 - gpio-controller: Boolean; if defined, MT7530's LED controller will run on
 	GPIO mode.
 - #gpio-cells: Must be 2 if gpio-controller is defined.
+- interrupt-controller: Boolean; Enables the internal interrupt controller.
+
+If interrupt-controller is defined, the following property is required.
+
+- #interrupt-cells: Must be 1.
+- interrupts: Parent interrupt for the interrupt controller.
 
 See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
 required, optional properties and how the integrated switch subnodes must