diff mbox series

[v2,3/5] arm64: dts: mt8195: add gce node

Message ID 20210705053429.4380-4-jason-jh.lin@mediatek.com (mailing list archive)
State New, archived
Headers show
Series Add gce support for mt8195 | expand

Commit Message

Jason-JH.Lin July 5, 2021, 5:34 a.m. UTC
Add gce node and gce alias on mt8195 dts file.

Signed-off-by: jason-jh.lin <jason-jh.lin@mediatek.com>
---
This patch is based on [1]
[1] Add Mediatek SoC MT8195 and evaluation board dts and Makefile
    - https://patchwork.kernel.org/project/linux-mediatek/patch/20210601075350.31515-2-seiya.wang@mediatek.com/
---
 arch/arm64/boot/dts/mediatek/mt8195.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index c146a91c6272..c10b48ef455f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -6,6 +6,7 @@ 
 
 /dts-v1/;
 #include <dt-bindings/clock/mt8195-clk.h>
+#include <dt-bindings/gce/mt8195-gce.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/power/mt8195-power.h>
@@ -16,6 +17,11 @@ 
 	#address-cells = <2>;
 	#size-cells = <2>;
 
+	aliases {
+		gce0 = &gce0;
+		gce1 = &gce1;
+	};
+
 	clocks {
 		clk26m: oscillator0 {
 			compatible = "fixed-clock";
@@ -717,6 +723,24 @@ 
 			#clock-cells = <1>;
 		};
 
+		gce0: mdp_mailbox@10320000 {
+			compatible = "mediatek,mt8195-gce";
+			reg = <0 0x10320000 0 0x4000>;
+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <1>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_GCE>;
+			clock-names = "gce";
+		};
+
+		gce1: disp_mailbox@10330000 {
+			compatible = "mediatek,mt8195-gce";
+			reg = <0 0x10330000 0 0x4000>;
+			interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <1>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_GCE2>;
+			clock-names = "gce";
+		};
+
 		uart0: serial@11001100 {
 			compatible = "mediatek,mt8195-uart", "mediatek,mt6577-uart";
 			reg = <0 0x11001100 0 0x100>;