| Message ID | 20210808123840.176738-3-mans0n@gorani.run (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2,1/2] dt-bindings: usb: mtk-musb: add MT7623 compatible | expand |
On Sun, Aug 08, 2021 at 09:38:40PM +0900, Sungbo Eo wrote: > MT7623 has an musb controller that is compatible with the one from MT2701. > > Signed-off-by: Sungbo Eo <mans0n@gorani.run> > --- > v2: > * rename usb3 label to usb0 > * move usb0 & u2phy1 nodes to the right sorted place > * disable u2phy1 by default > * correct u2port2 node name to match its reg address > --- > arch/arm/boot/dts/mt7623.dtsi | 34 ++++++++++++++++++++++++++++++++++ > arch/arm/boot/dts/mt7623a.dtsi | 4 ++++ > 2 files changed, 38 insertions(+) > > diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi > index 3c11f7cfcc40..790d74439cc6 100644 > --- a/arch/arm/boot/dts/mt7623.dtsi > +++ b/arch/arm/boot/dts/mt7623.dtsi > @@ -585,6 +585,40 @@ spi2: spi@11017000 { > status = "disabled"; > }; > > + usb0: usb@11200000 { > + compatible = "mediatek,mt7623-musb", > + "mediatek,mtk-musb"; > + reg = <0 0x11200000 0 0x1000>; > + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; > + interrupt-names = "mc"; > + phys = <&u2port2 PHY_TYPE_USB2>; > + dr_mode = "otg"; > + clocks = <&pericfg CLK_PERI_USB0>, > + <&pericfg CLK_PERI_USB0_MCU>, > + <&pericfg CLK_PERI_USB_SLV>; > + clock-names = "main","mcu","univpll"; > + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; > + status = "disabled"; > + }; > + > + u2phy1: t-phy@11210000 { > + compatible = "mediatek,mt7623-tphy", > + "mediatek,generic-tphy-v1"; > + reg = <0 0x11210000 0 0x0800>; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + status = "disabled"; > + > + u2port2: usb-phy@11210800 { > + reg = <0 0x11210800 0 0x0100>; > + clocks = <&topckgen CLK_TOP_USB_PHY48M>; > + clock-names = "ref"; > + #phy-cells = <1>; > + status = "okay"; Enabled is the default and doesn't really make sense here given the parent is disabled. Drop. > + }; > + }; > + > audsys: clock-controller@11220000 { > compatible = "mediatek,mt7623-audsys", > "mediatek,mt2701-audsys", > diff --git a/arch/arm/boot/dts/mt7623a.dtsi b/arch/arm/boot/dts/mt7623a.dtsi > index 0735a1fb8ad9..d304b62d24b5 100644 > --- a/arch/arm/boot/dts/mt7623a.dtsi > +++ b/arch/arm/boot/dts/mt7623a.dtsi > @@ -35,6 +35,10 @@ &scpsys { > clock-names = "ethif"; > }; > > +&usb0 { > + power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>; > +}; > + > &usb1 { > power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>; > }; > -- > 2.32.0 > >
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 3c11f7cfcc40..790d74439cc6 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -585,6 +585,40 @@ spi2: spi@11017000 { status = "disabled"; }; + usb0: usb@11200000 { + compatible = "mediatek,mt7623-musb", + "mediatek,mtk-musb"; + reg = <0 0x11200000 0 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "mc"; + phys = <&u2port2 PHY_TYPE_USB2>; + dr_mode = "otg"; + clocks = <&pericfg CLK_PERI_USB0>, + <&pericfg CLK_PERI_USB0_MCU>, + <&pericfg CLK_PERI_USB_SLV>; + clock-names = "main","mcu","univpll"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; + status = "disabled"; + }; + + u2phy1: t-phy@11210000 { + compatible = "mediatek,mt7623-tphy", + "mediatek,generic-tphy-v1"; + reg = <0 0x11210000 0 0x0800>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + u2port2: usb-phy@11210800 { + reg = <0 0x11210800 0 0x0100>; + clocks = <&topckgen CLK_TOP_USB_PHY48M>; + clock-names = "ref"; + #phy-cells = <1>; + status = "okay"; + }; + }; + audsys: clock-controller@11220000 { compatible = "mediatek,mt7623-audsys", "mediatek,mt2701-audsys", diff --git a/arch/arm/boot/dts/mt7623a.dtsi b/arch/arm/boot/dts/mt7623a.dtsi index 0735a1fb8ad9..d304b62d24b5 100644 --- a/arch/arm/boot/dts/mt7623a.dtsi +++ b/arch/arm/boot/dts/mt7623a.dtsi @@ -35,6 +35,10 @@ &scpsys { clock-names = "ethif"; }; +&usb0 { + power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>; +}; + &usb1 { power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>; };
MT7623 has an musb controller that is compatible with the one from MT2701. Signed-off-by: Sungbo Eo <mans0n@gorani.run> --- v2: * rename usb3 label to usb0 * move usb0 & u2phy1 nodes to the right sorted place * disable u2phy1 by default * correct u2port2 node name to match its reg address --- arch/arm/boot/dts/mt7623.dtsi | 34 ++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/mt7623a.dtsi | 4 ++++ 2 files changed, 38 insertions(+)