| Message ID | 20210830155903.13907-2-mans0n@gorani.run (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v4,1/2] arm: dts: mt7623: add musb device nodes | expand |
On Tue, 2021-08-31 at 00:59 +0900, Sungbo Eo wrote: > MT7623 has an musb controller that is compatible with the one from > MT2701. > > Signed-off-by: Sungbo Eo <mans0n@gorani.run> > Tested-by: Frank Wunderlich <frank-w@public-files.de> > --- > v4: > * add tested by Frank > > v3: > * remove unnecessary status=okay from u2port2 > > v2: > * rename usb3 label to usb0 > * move usb0 & u2phy1 nodes to the right sorted place > * disable u2phy1 by default > * correct u2port2 node name to match its reg address > --- > arch/arm/boot/dts/mt7623.dtsi | 33 > +++++++++++++++++++++++++++++++++ > arch/arm/boot/dts/mt7623a.dtsi | 4 ++++ > 2 files changed, 37 insertions(+) > > diff --git a/arch/arm/boot/dts/mt7623.dtsi > b/arch/arm/boot/dts/mt7623.dtsi > index 3c11f7cfcc40..21c8a291b74e 100644 > --- a/arch/arm/boot/dts/mt7623.dtsi > +++ b/arch/arm/boot/dts/mt7623.dtsi > @@ -585,6 +585,39 @@ spi2: spi@11017000 { > status = "disabled"; > }; > > + usb0: usb@11200000 { > + compatible = "mediatek,mt7623-musb", > + "mediatek,mtk-musb"; > + reg = <0 0x11200000 0 0x1000>; > + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; > + interrupt-names = "mc"; > + phys = <&u2port2 PHY_TYPE_USB2>; > + dr_mode = "otg"; > + clocks = <&pericfg CLK_PERI_USB0>, > + <&pericfg CLK_PERI_USB0_MCU>, > + <&pericfg CLK_PERI_USB_SLV>; > + clock-names = "main","mcu","univpll"; > + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; > + status = "disabled"; > + }; > + > + u2phy1: t-phy@11210000 { > + compatible = "mediatek,mt7623-tphy", > + "mediatek,generic-tphy-v1"; > + reg = <0 0x11210000 0 0x0800>; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + status = "disabled"; > + > + u2port2: usb-phy@11210800 { > + reg = <0 0x11210800 0 0x0100>; > + clocks = <&topckgen CLK_TOP_USB_PHY48M>; > + clock-names = "ref"; > + #phy-cells = <1>; > + }; > + }; > + > audsys: clock-controller@11220000 { > compatible = "mediatek,mt7623-audsys", > "mediatek,mt2701-audsys", > diff --git a/arch/arm/boot/dts/mt7623a.dtsi > b/arch/arm/boot/dts/mt7623a.dtsi > index 0735a1fb8ad9..d304b62d24b5 100644 > --- a/arch/arm/boot/dts/mt7623a.dtsi > +++ b/arch/arm/boot/dts/mt7623a.dtsi > @@ -35,6 +35,10 @@ &scpsys { > clock-names = "ethif"; > }; > > +&usb0 { > + power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>; > +}; > + > &usb1 { > power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>; > }; Is the dt-binding patch applied? It's better to put it into this series due to the new compatible "mediatek,mt7623-musb" is used for the first time. Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Thanks a lot
Am 31. August 2021 08:27:18 MESZ schrieb "Chunfeng Yun (云春峰)" <Chunfeng.Yun@mediatek.com>: >Is the dt-binding patch applied? >It's better to put it into this series due to the new >compatible "mediatek,mt7623-musb" is used for the first time. > >Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Hi, I don't see [1] (ack from rob) in [2]/[3] @sungbo: please leave dt-bindings patch in series. You need no new version only for adding tags (acked,tested or reviewed). Only for code-changes,but then add tags from previous versions. Imho it is better to take my musb patch [4] into the series as well to make depency cleaner [1] https://patchwork.kernel.org/project/linux-mediatek/patch/20210808123840.176738-2-mans0n@gorani.run/ [2] https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git/log/?h=for-next [3] https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux.git/log/?h=for-next [4] https://patchwork.kernel.org/project/linux-mediatek/patch/20210830145958.108605-1-linux@fw-web.de/ regards Frank
On 2021-08-31 17:59, Frank Wunderlich wrote: > Am 31. August 2021 08:27:18 MESZ schrieb "Chunfeng Yun (云春峰)" <Chunfeng.Yun@mediatek.com>: > >> Is the dt-binding patch applied? >> It's better to put it into this series due to the new >> compatible "mediatek,mt7623-musb" is used for the first time. >> >> Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com> > > Hi, > > I don't see [1] (ack from rob) in [2]/[3] You can find it here. https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git/log/?h=usb-next > > @sungbo: please leave dt-bindings patch in series. I'll keep it for a while, then. > You need no new version only for adding tags (acked,tested or reviewed). > Only for code-changes,but then add tags from previous versions. Got it. Thanks for the tip. :) > > Imho it is better to take my musb patch [4] > into the series as well to make depency cleaner Okay, I'll take it in the next version. Thanks. > > [1] https://patchwork.kernel.org/project/linux-mediatek/patch/20210808123840.176738-2-mans0n@gorani.run/ > [2] https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git/log/?h=for-next > [3] https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux.git/log/?h=for-next > [4] https://patchwork.kernel.org/project/linux-mediatek/patch/20210830145958.108605-1-linux@fw-web.de/ > regards Frank >
> Gesendet: Dienstag, 31. August 2021 um 13:02 Uhr > Von: "Sungbo Eo" <mans0n@gorani.run> > On 2021-08-31 17:59, Frank Wunderlich wrote: > > Am 31. August 2021 08:27:18 MESZ schrieb "Chunfeng Yun (云春峰)" <Chunfeng.Yun@mediatek.com>: > > I don't see [1] (ack from rob) in [2]/[3] > > You can find it here. > https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git/log/?h=usb-next > > > > > @sungbo: please leave dt-bindings patch in series. > > I'll keep it for a while, then. ok, then it is not needed again...have not searched in usb-tree. > > You need no new version only for adding tags (acked,tested or reviewed). > > Only for code-changes,but then add tags from previous versions. > > Got it. Thanks for the tip. :) > > > Imho it is better to take my musb patch [4] > > into the series as well to make depency cleaner > > Okay, I'll take it in the next version. okay, if dt-bindings is already in usb-tree wait what maintainers (matthias/rob) says about adding my patch to a new version of your series or if this is clear now :) > > [1] https://patchwork.kernel.org/project/linux-mediatek/patch/20210808123840.176738-2-mans0n@gorani.run/ > > [2] https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git/log/?h=for-next > > [3] https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux.git/log/?h=for-next > > [4] https://patchwork.kernel.org/project/linux-mediatek/patch/20210830145958.108605-1-linux@fw-web.de/ > > regards Frank > > >
Hi, just a gentle ping for this patch (second part is already merged to usb-tree) and my followup for bpi-r2 https://patchwork.kernel.org/project/linux-mediatek/patch/20210830145958.108605-1-linux@fw-web.de/ regards Frank > Gesendet: Montag, 30. August 2021 um 17:59 Uhr > Von: "Sungbo Eo" <mans0n@gorani.run> > An: linux-mediatek@lists.infradead.org > Cc: "Rob Herring" <robh+dt@kernel.org>, "Matthias Brugger" <matthias.bgg@gmail.com>, "Bin Liu" <b-liu@ti.com>, "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>, "Frank Wunderlich" <frank-w@public-files.de>, devicetree@vger.kernel.org, linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, "Sungbo Eo" <mans0n@gorani.run> > Betreff: [PATCH v4 1/2] arm: dts: mt7623: add musb device nodes > > MT7623 has an musb controller that is compatible with the one from MT2701. > > Signed-off-by: Sungbo Eo <mans0n@gorani.run> > Tested-by: Frank Wunderlich <frank-w@public-files.de> > --- > v4: > * add tested by Frank > > v3: > * remove unnecessary status=okay from u2port2 > > v2: > * rename usb3 label to usb0 > * move usb0 & u2phy1 nodes to the right sorted place > * disable u2phy1 by default > * correct u2port2 node name to match its reg address > --- > arch/arm/boot/dts/mt7623.dtsi | 33 +++++++++++++++++++++++++++++++++ > arch/arm/boot/dts/mt7623a.dtsi | 4 ++++ > 2 files changed, 37 insertions(+) > > diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi > index 3c11f7cfcc40..21c8a291b74e 100644 > --- a/arch/arm/boot/dts/mt7623.dtsi > +++ b/arch/arm/boot/dts/mt7623.dtsi > @@ -585,6 +585,39 @@ spi2: spi@11017000 { > status = "disabled"; > }; > > + usb0: usb@11200000 { > + compatible = "mediatek,mt7623-musb", > + "mediatek,mtk-musb"; > + reg = <0 0x11200000 0 0x1000>; > + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; > + interrupt-names = "mc"; > + phys = <&u2port2 PHY_TYPE_USB2>; > + dr_mode = "otg"; > + clocks = <&pericfg CLK_PERI_USB0>, > + <&pericfg CLK_PERI_USB0_MCU>, > + <&pericfg CLK_PERI_USB_SLV>; > + clock-names = "main","mcu","univpll"; > + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; > + status = "disabled"; > + }; > + > + u2phy1: t-phy@11210000 { > + compatible = "mediatek,mt7623-tphy", > + "mediatek,generic-tphy-v1"; > + reg = <0 0x11210000 0 0x0800>; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + status = "disabled"; > + > + u2port2: usb-phy@11210800 { > + reg = <0 0x11210800 0 0x0100>; > + clocks = <&topckgen CLK_TOP_USB_PHY48M>; > + clock-names = "ref"; > + #phy-cells = <1>; > + }; > + }; > + > audsys: clock-controller@11220000 { > compatible = "mediatek,mt7623-audsys", > "mediatek,mt2701-audsys", > diff --git a/arch/arm/boot/dts/mt7623a.dtsi b/arch/arm/boot/dts/mt7623a.dtsi > index 0735a1fb8ad9..d304b62d24b5 100644 > --- a/arch/arm/boot/dts/mt7623a.dtsi > +++ b/arch/arm/boot/dts/mt7623a.dtsi > @@ -35,6 +35,10 @@ &scpsys { > clock-names = "ethif"; > }; > > +&usb0 { > + power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>; > +}; > + > &usb1 { > power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>; > }; > -- > 2.33.0 > > > _______________________________________________ > Linux-mediatek mailing list > Linux-mediatek@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-mediatek >
On 30/08/2021 17:59, Sungbo Eo wrote: > MT7623 has an musb controller that is compatible with the one from MT2701. > > Signed-off-by: Sungbo Eo <mans0n@gorani.run> > Tested-by: Frank Wunderlich <frank-w@public-files.de> Applied to v5.15-next/dts32 Thanks > --- > v4: > * add tested by Frank > > v3: > * remove unnecessary status=okay from u2port2 > > v2: > * rename usb3 label to usb0 > * move usb0 & u2phy1 nodes to the right sorted place > * disable u2phy1 by default > * correct u2port2 node name to match its reg address > --- > arch/arm/boot/dts/mt7623.dtsi | 33 +++++++++++++++++++++++++++++++++ > arch/arm/boot/dts/mt7623a.dtsi | 4 ++++ > 2 files changed, 37 insertions(+) > > diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi > index 3c11f7cfcc40..21c8a291b74e 100644 > --- a/arch/arm/boot/dts/mt7623.dtsi > +++ b/arch/arm/boot/dts/mt7623.dtsi > @@ -585,6 +585,39 @@ spi2: spi@11017000 { > status = "disabled"; > }; > > + usb0: usb@11200000 { > + compatible = "mediatek,mt7623-musb", > + "mediatek,mtk-musb"; > + reg = <0 0x11200000 0 0x1000>; > + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; > + interrupt-names = "mc"; > + phys = <&u2port2 PHY_TYPE_USB2>; > + dr_mode = "otg"; > + clocks = <&pericfg CLK_PERI_USB0>, > + <&pericfg CLK_PERI_USB0_MCU>, > + <&pericfg CLK_PERI_USB_SLV>; > + clock-names = "main","mcu","univpll"; > + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; > + status = "disabled"; > + }; > + > + u2phy1: t-phy@11210000 { > + compatible = "mediatek,mt7623-tphy", > + "mediatek,generic-tphy-v1"; > + reg = <0 0x11210000 0 0x0800>; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + status = "disabled"; > + > + u2port2: usb-phy@11210800 { > + reg = <0 0x11210800 0 0x0100>; > + clocks = <&topckgen CLK_TOP_USB_PHY48M>; > + clock-names = "ref"; > + #phy-cells = <1>; > + }; > + }; > + > audsys: clock-controller@11220000 { > compatible = "mediatek,mt7623-audsys", > "mediatek,mt2701-audsys", > diff --git a/arch/arm/boot/dts/mt7623a.dtsi b/arch/arm/boot/dts/mt7623a.dtsi > index 0735a1fb8ad9..d304b62d24b5 100644 > --- a/arch/arm/boot/dts/mt7623a.dtsi > +++ b/arch/arm/boot/dts/mt7623a.dtsi > @@ -35,6 +35,10 @@ &scpsys { > clock-names = "ethif"; > }; > > +&usb0 { > + power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>; > +}; > + > &usb1 { > power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>; > }; >
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 3c11f7cfcc40..21c8a291b74e 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -585,6 +585,39 @@ spi2: spi@11017000 { status = "disabled"; }; + usb0: usb@11200000 { + compatible = "mediatek,mt7623-musb", + "mediatek,mtk-musb"; + reg = <0 0x11200000 0 0x1000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "mc"; + phys = <&u2port2 PHY_TYPE_USB2>; + dr_mode = "otg"; + clocks = <&pericfg CLK_PERI_USB0>, + <&pericfg CLK_PERI_USB0_MCU>, + <&pericfg CLK_PERI_USB_SLV>; + clock-names = "main","mcu","univpll"; + power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>; + status = "disabled"; + }; + + u2phy1: t-phy@11210000 { + compatible = "mediatek,mt7623-tphy", + "mediatek,generic-tphy-v1"; + reg = <0 0x11210000 0 0x0800>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + status = "disabled"; + + u2port2: usb-phy@11210800 { + reg = <0 0x11210800 0 0x0100>; + clocks = <&topckgen CLK_TOP_USB_PHY48M>; + clock-names = "ref"; + #phy-cells = <1>; + }; + }; + audsys: clock-controller@11220000 { compatible = "mediatek,mt7623-audsys", "mediatek,mt2701-audsys", diff --git a/arch/arm/boot/dts/mt7623a.dtsi b/arch/arm/boot/dts/mt7623a.dtsi index 0735a1fb8ad9..d304b62d24b5 100644 --- a/arch/arm/boot/dts/mt7623a.dtsi +++ b/arch/arm/boot/dts/mt7623a.dtsi @@ -35,6 +35,10 @@ &scpsys { clock-names = "ethif"; }; +&usb0 { + power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>; +}; + &usb1 { power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>; };