diff mbox series

[RFC,v2,4/4] arm64: dts: add snfi node for spi nand

Message ID 20210927054205.17960-5-xiangsheng.hou@mediatek.com (mailing list archive)
State New, archived
Headers show
Series Add a driver for Mediatek SPI Nand controller | expand

Commit Message

Xiangsheng Hou Sept. 27, 2021, 5:42 a.m. UTC 
Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts | 17 +++++++++++++++++
 arch/arm64/boot/dts/mediatek/mt7622.dtsi     | 13 +++++++++++++
 2 files changed, 30 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
index f2dc850010f1..6df575acf290 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -223,6 +223,23 @@  &nandc {
 	status = "disabled";
 };
 
+&snfi {
+	pinctrl-names = "default";
+	/* pin shared with spic */
+	pinctrl-0 = <&snfi_pins>;
+	status = "disabled";
+
+	spi_nand@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		nand-ecc-engine = <&bch>;
+		nand-ecc-algo = "ecc-mtk";
+	};
+};
+
 &nor_flash {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spi_nor_pins>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 890a942ec608..0525e4de5ec0 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -545,6 +545,19 @@  nandc: nfi@1100d000 {
 		status = "disabled";
 	};
 
+	snfi: spi@1100d000 {
+		compatible = "mediatek,mt7622-snfi";
+		reg = <0 0x1100D000 0 0x1000>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+		clocks = <&infracfg_ao CK_INFRA_NFI1_CK>,
+			 <&infracfg_ao CK_INFRA_SPINFI1_CK>,
+			 <&infracfg_ao CK_INFRA_NFI_HCK_CK>;
+		clock-names = "nfi_clk", "snfi_clk", "hclk";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	bch: ecc@1100e000 {
 		compatible = "mediatek,mt7622-ecc";
 		reg = <0 0x1100e000 0 0x1000>;