diff mbox series

[v4,5/7] arm64: dts: mt8183: Add the mmsys reset bit to reset the dsi0

Message ID 20210930103105.v4.5.I933f1532d7a1b2910843a9644c86a7d94a4b44e1@changeid (mailing list archive)
State New, archived
Headers show
Series Add support to the mmsys driver to be a reset controller | expand

Commit Message

Enric Balletbo i Serra Sept. 30, 2021, 8:31 a.m. UTC 
Reset the DSI hardware is needed to prevent different settings between
the bootloader and the kernel.

While here, also remove the undocumented and also not used
'mediatek,syscon-dsi' property.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
---

(no changes since v1)

 arch/arm64/boot/dts/mediatek/mt8183.dtsi  | 3 ++-
 include/dt-bindings/reset/mt8183-resets.h | 3 +++
 2 files changed, 5 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 9639ca17638e..9c4158a1057c 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -1251,6 +1251,7 @@  mmsys: syscon@14000000 {
 			compatible = "mediatek,mt8183-mmsys", "syscon";
 			reg = <0 0x14000000 0 0x1000>;
 			#clock-cells = <1>;
+			#reset-cells = <1>;
 			mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
 				 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
@@ -1365,11 +1366,11 @@  dsi0: dsi@14014000 {
 			reg = <0 0x14014000 0 0x1000>;
 			interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_LOW>;
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
-			mediatek,syscon-dsi = <&mmsys 0x140>;
 			clocks = <&mmsys CLK_MM_DSI0_MM>,
 				 <&mmsys CLK_MM_DSI0_IF>,
 				 <&mipi_tx0>;
 			clock-names = "engine", "digital", "hs";
+			resets = <&mmsys MT8183_MMSYS_SW0_RST_B_DISP_DSI0>;
 			phys = <&mipi_tx0>;
 			phy-names = "dphy";
 		};
diff --git a/include/dt-bindings/reset/mt8183-resets.h b/include/dt-bindings/reset/mt8183-resets.h
index a1bbd41e0d12..48c5d2de0a38 100644
--- a/include/dt-bindings/reset/mt8183-resets.h
+++ b/include/dt-bindings/reset/mt8183-resets.h
@@ -80,6 +80,9 @@ 
 
 #define MT8183_INFRACFG_SW_RST_NUM				128
 
+/* MMSYS resets */
+#define MT8183_MMSYS_SW0_RST_B_DISP_DSI0			25
+
 #define MT8183_TOPRGU_MM_SW_RST					1
 #define MT8183_TOPRGU_MFG_SW_RST				2
 #define MT8183_TOPRGU_VENC_SW_RST				3