| Message ID | 20211015074654.19615-1-miles.chen@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | scsi: sd: fix crashes in sd_resume_runtime | expand |
Am Freitag, dem 15.10.2021 um 15:46 +0800 schrieb Miles Chen: > After merging commit ed4246d37f3b ("scsi: sd: REQUEST SENSE for > BLIST_IGN_MEDIA_CHANGE devices in runtime_resume()"), I hit the > following crash on my device. > > static int sd_resume_runtime(struct device *dev) > { > struct scsi_disk *sdkp = dev_get_drvdata(dev); > struct scsi_device *sdp = sdkp->device; // sdkp == NULL and > crash > > if (sdp->ignore_media_change) { > ... > } > > I checked sd_resume() and found that sdkp is possbile to be NULL, and > there is a null pointer test in sd_resume() for this case. > To fix this crash, follow sd_resume() to test if sdkp is NULL > before dereferencing it. > > Crash: > [ 4.695171][ T151] Unable to handle kernel NULL pointer > dereference at virtual address 0000000000000008 > [ 4.696591][ T151] Mem abort info: > [ 4.697919][ T151] ESR = 0x96000005 > [ 4.699692][ T151] EC = 0x25: DABT (current EL), IL = 32 bits > [ 4.701990][ T151] SET = 0, FnV = 0 > [ 4.702513][ T151] EA = 0, S1PTW = 0 > [ 4.704431][ T151] FSC = 0x05: level 1 translation fault > [ 4.705254][ T151] Data abort info: > [ 4.705806][ T151] ISV = 0, ISS = 0x00000005 > [ 4.706484][ T151] CM = 0, WnR = 0 > [ 4.707048][ T151] [0000000000000008] user address but active_mm > is swapper > [ 4.710577][ T151] Internal error: Oops: 96000005 [#1] PREEMPT > SMP > [ 4.832361][ T151] Kernel Offset: 0x12acc80000 from > 0xffffffc010000000 > [ 4.833254][ T151] PHYS_OFFSET: 0x40000000 > [ 4.833814][ T151] pstate: 80400005 (Nzcv daif +PAN -UAO) > [ 4.834546][ T151] pc : sd_resume_runtime+0x20/0x14c > [ 4.835227][ T151] lr : scsi_runtime_resume+0x84/0xe4 > [ 4.835916][ T151] sp : ffffffc0110db8d0 > [ 4.836450][ T151] x29: ffffffc0110db8d0 x28: 0000000000000001 > [ 4.837258][ T151] x27: ffffff80c0bd1ac0 x26: ffffff80c0bd1ad0 > [ 4.838063][ T151] x25: ffffff80cea7e448 x24: ffffffd2bf961000 > [ 4.838867][ T151] x23: ffffffd2be69f838 x22: ffffffd2bd9dfb4c > [ 4.839670][ T151] x21: 0000000000000000 x20: ffffff80cea7e000 > [ 4.840474][ T151] x19: ffffff80cea7e260 x18: ffffffc0110dd078 > [ 4.841277][ T151] x17: 00000000658783d9 x16: 0000000051469dac > [ 4.842081][ T151] x15: 00000000b87f6327 x14: 0000000068fd680d > [ 4.842885][ T151] x13: ffffff80c0bd2470 x12: ffffffd2bfa7f5f0 > [ 4.843688][ T151] x11: 0000000000000078 x10: 0000000000000001 > [ 4.844492][ T151] x9 : 00000000000000b1 x8 : ffffffd2be69f88c > [ 4.845295][ T151] x7 : ffffffd2bd9e0e5c x6 : 0000000000000000 > [ 4.846099][ T151] x5 : 0000000000000080 x4 : 0000000000000001 > [ 4.846902][ T151] x3 : 68fd680dfe4ebe5e x2 : 0000000000000003 > [ 4.847706][ T151] x1 : ffffffd2bf7f9380 x0 : ffffff80cea7e260 > [ 4.856708][ T151] die+0x16c/0x59c > [ 4.857191][ T151] __do_kernel_fault+0x1e8/0x210 > [ 4.857833][ T151] do_page_fault+0xa4/0x654 > [ 4.858418][ T151] do_translation_fault+0x6c/0x1b0 > [ 4.859083][ T151] do_mem_abort+0x68/0x10c > [ 4.859655][ T151] el1_abort+0x40/0x64 > [ 4.860182][ T151] el1h_64_sync_handler+0x54/0x88 > [ 4.860834][ T151] el1h_64_sync+0x7c/0x80 > [ 4.861395][ T151] sd_resume_runtime+0x20/0x14c > [ 4.862025][ T151] scsi_runtime_resume+0x84/0xe4 > [ 4.862667][ T151] __rpm_callback+0x1f4/0x8cc > [ 4.863275][ T151] rpm_resume+0x7e8/0xaa4 > [ 4.863836][ T151] __pm_runtime_resume+0xa0/0x110 > [ 4.864489][ T151] sd_probe+0x30/0x428 > [ 4.865016][ T151] really_probe+0x14c/0x500 > [ 4.865602][ T151] __driver_probe_device+0xb4/0x18c > [ 4.866278][ T151] driver_probe_device+0x60/0x2c4 > [ 4.866931][ T151] __device_attach_driver+0x228/0x2bc > [ 4.867630][ T151] __device_attach_async_helper+0x154/0x21c > [ 4.868398][ T151] async_run_entry_fn+0x5c/0x1c4 > [ 4.869038][ T151] process_one_work+0x3ac/0x590 > [ 4.869670][ T151] worker_thread+0x320/0x758 > [ 4.870265][ T151] kthread+0x2e8/0x35c > [ 4.870792][ T151] ret_from_fork+0x10/0x20 > > Cc: Stanley Chu <stanley.chu@mediatek.com> > Fixes: ed4246d37f3b ("scsi: sd: REQUEST SENSE for > BLIST_IGN_MEDIA_CHANGE devices in runtime_resume()") > Signed-off-by: Miles Chen <miles.chen@mediatek.com> > --- > drivers/scsi/sd.c | 7 ++++++- > 1 file changed, 6 insertions(+), 1 deletion(-) > > diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c > index 523bf2fdc253..fce63335084e 100644 > --- a/drivers/scsi/sd.c > +++ b/drivers/scsi/sd.c > @@ -3683,7 +3683,12 @@ static int sd_resume(struct device *dev) > static int sd_resume_runtime(struct device *dev) > { > struct scsi_disk *sdkp = dev_get_drvdata(dev); > - struct scsi_device *sdp = sdkp->device; > + struct scsi_device *sdp; > + > + if (!sdkp) /* E.g.: runtime resume at the start of > sd_probe() */ > + return 0; > + > + sdp = sdkp->device; > > if (sdp->ignore_media_change) { > /* clear the device's sense data */ I'm fine with this, thank you. Reviewed-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Hi Miles, On Fri, 2021-10-15 at 15:46 +0800, Miles Chen wrote: > After merging commit ed4246d37f3b ("scsi: sd: REQUEST SENSE for > BLIST_IGN_MEDIA_CHANGE devices in runtime_resume()"), I hit the > following crash on my device. > > static int sd_resume_runtime(struct device *dev) > { > struct scsi_disk *sdkp = dev_get_drvdata(dev); > struct scsi_device *sdp = sdkp->device; // sdkp == NULL and > crash > > if (sdp->ignore_media_change) { > ... > } > > I checked sd_resume() and found that sdkp is possbile to be NULL, and > there is a null pointer test in sd_resume() for this case. > To fix this crash, follow sd_resume() to test if sdkp is NULL > before dereferencing it. LGTM. Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
On 10/15/21 00:46, Miles Chen wrote: > Crash: > [ 4.695171][ T151] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 > [ 4.710577][ T151] Internal error: Oops: 96000005 [#1] PREEMPT SMP > [ 4.856708][ T151] die+0x16c/0x59c > [ 4.857191][ T151] __do_kernel_fault+0x1e8/0x210 > [ 4.857833][ T151] do_page_fault+0xa4/0x654 > [ 4.858418][ T151] do_translation_fault+0x6c/0x1b0 > [ 4.859083][ T151] do_mem_abort+0x68/0x10c > [ 4.859655][ T151] el1_abort+0x40/0x64 > [ 4.860182][ T151] el1h_64_sync_handler+0x54/0x88 > [ 4.860834][ T151] el1h_64_sync+0x7c/0x80 > [ 4.861395][ T151] sd_resume_runtime+0x20/0x14c > [ 4.862025][ T151] scsi_runtime_resume+0x84/0xe4 > [ 4.862667][ T151] __rpm_callback+0x1f4/0x8cc > [ 4.863275][ T151] rpm_resume+0x7e8/0xaa4 > [ 4.863836][ T151] __pm_runtime_resume+0xa0/0x110 > [ 4.864489][ T151] sd_probe+0x30/0x428 > [ 4.865016][ T151] really_probe+0x14c/0x500 > [ 4.865602][ T151] __driver_probe_device+0xb4/0x18c > [ 4.866278][ T151] driver_probe_device+0x60/0x2c4 > [ 4.866931][ T151] __device_attach_driver+0x228/0x2bc > [ 4.867630][ T151] __device_attach_async_helper+0x154/0x21c > [ 4.868398][ T151] async_run_entry_fn+0x5c/0x1c4 > [ 4.869038][ T151] process_one_work+0x3ac/0x590 > [ 4.869670][ T151] worker_thread+0x320/0x758 > [ 4.870265][ T151] kthread+0x2e8/0x35c > [ 4.870792][ T151] ret_from_fork+0x10/0x20 > > Cc: Stanley Chu <stanley.chu@mediatek.com> > Fixes: ed4246d37f3b ("scsi: sd: REQUEST SENSE for BLIST_IGN_MEDIA_CHANGE devices in runtime_resume()") > Signed-off-by: Miles Chen <miles.chen@mediatek.com> > --- > drivers/scsi/sd.c | 7 ++++++- > 1 file changed, 6 insertions(+), 1 deletion(-) > > diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c > index 523bf2fdc253..fce63335084e 100644 > --- a/drivers/scsi/sd.c > +++ b/drivers/scsi/sd.c > @@ -3683,7 +3683,12 @@ static int sd_resume(struct device *dev) > static int sd_resume_runtime(struct device *dev) > { > struct scsi_disk *sdkp = dev_get_drvdata(dev); > - struct scsi_device *sdp = sdkp->device; > + struct scsi_device *sdp; > + > + if (!sdkp) /* E.g.: runtime resume at the start of sd_probe() */ > + return 0; > + > + sdp = sdkp->device; > > if (sdp->ignore_media_change) { > /* clear the device's sense data */ Fixing this crash by adding a check inside sd_resume_runtime() seems wrong to me. sd_probe() namely calls dev_set_drvdata(dev, sdkp) before sd_probe() has finished so even with the above patch applied sd_resume() can be called before sd_probe() has finished. With which kernel version has this crash been encountered? The scsi_autopm_get_device() / scsi_autopm_put_device() pair added by commit 6fe8c1dbefd6 ("scsi: balance out autopm get/put calls in scsi_sysfs_add_sdev()"; kernel v3.18) should be sufficient to prevent the reported crash. Thanks, Bart.
From: Miles Chen <miles.chen@mediatek.com> > Fixing this crash by adding a check inside sd_resume_runtime() seems wrong to me. sd_probe() namely calls dev_set_drvdata(dev, sdkp) before > sd_probe() has finished so even with the above patch applied sd_resume() can be called before sd_probe() has finished. > > With which kernel version has this crash been encountered? The > scsi_autopm_get_device() / scsi_autopm_put_device() pair added by commit > 6fe8c1dbefd6 ("scsi: balance out autopm get/put calls in scsi_sysfs_add_sdev()"; kernel v3.18) should be sufficient to prevent the reported crash. > > Thanks, Thanks for your comment. I hit this in v5.15-rc1 merge, I can still reproduce this with v5.15-rc5. I found two ways to avoid the crash: 1) revert commit ed4246d37f3b ("scsi: sd: REQUEST SENSE for BLIST_IGN_MEDIA_CHANGE devices in runtime_resume()") works for me. 2) adding the NULL point check in this patch. From the backtrace, dev_set_drvdata() is called after sd_resume_runtime() is called. sd_probe() { scsi_autopm_get_device() pm_runtime_get_sync() __pm_runtime_resume() rpm_resume() ... sd_resume_runtime() // crash here dev_set_drvdata(dev, sdkp); // sdkp is set later } [ 4.861395][ T151] sd_resume_runtime+0x20/0x14c [ 4.862025][ T151] scsi_runtime_resume+0x84/0xe4 [ 4.862667][ T151] __rpm_callback+0x1f4/0x8cc [ 4.863275][ T151] rpm_resume+0x7e8/0xaa4 [ 4.863836][ T151] __pm_runtime_resume+0xa0/0x110 [ 4.864489][ T151] sd_probe+0x30/0x428 [ 4.865016][ T151] really_probe+0x14c/0x500
On 10/15/21 13:11, miles.chen@mediatek.com wrote: > I hit this in v5.15-rc1 merge, I can still reproduce this with v5.15-rc5. > I found two ways to avoid the crash: > 1) revert commit ed4246d37f3b ("scsi: sd: REQUEST SENSE for > BLIST_IGN_MEDIA_CHANGE devices in runtime_resume()") works for me. > 2) adding the NULL point check in this patch. > >>From the backtrace, dev_set_drvdata() is called after sd_resume_runtime() > is called. > > sd_probe() > { > scsi_autopm_get_device() > pm_runtime_get_sync() > __pm_runtime_resume() > rpm_resume() > ... > sd_resume_runtime() // crash here > > dev_set_drvdata(dev, sdkp); // sdkp is set later > } > > [ 4.861395][ T151] sd_resume_runtime+0x20/0x14c > [ 4.862025][ T151] scsi_runtime_resume+0x84/0xe4 > [ 4.862667][ T151] __rpm_callback+0x1f4/0x8cc > [ 4.863275][ T151] rpm_resume+0x7e8/0xaa4 > [ 4.863836][ T151] __pm_runtime_resume+0xa0/0x110 > [ 4.864489][ T151] sd_probe+0x30/0x428 > [ 4.865016][ T151] really_probe+0x14c/0x500 Thanks for the clarification. Given this clarification I'm fine with your patch. Bart.
> Thanks for the clarification. Given this clarification I'm fine with your patch. > Bart. thanks for your review Miles
On Fri, 15 Oct 2021 15:46:54 +0800, Miles Chen wrote: > After merging commit ed4246d37f3b ("scsi: sd: REQUEST SENSE for > BLIST_IGN_MEDIA_CHANGE devices in runtime_resume()"), I hit the > following crash on my device. > > static int sd_resume_runtime(struct device *dev) > { > struct scsi_disk *sdkp = dev_get_drvdata(dev); > struct scsi_device *sdp = sdkp->device; // sdkp == NULL and crash > > [...] Applied to 5.15/scsi-fixes, thanks! [1/1] scsi: sd: fix crashes in sd_resume_runtime https://git.kernel.org/mkp/scsi/c/85374b639229
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 523bf2fdc253..fce63335084e 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -3683,7 +3683,12 @@ static int sd_resume(struct device *dev) static int sd_resume_runtime(struct device *dev) { struct scsi_disk *sdkp = dev_get_drvdata(dev); - struct scsi_device *sdp = sdkp->device; + struct scsi_device *sdp; + + if (!sdkp) /* E.g.: runtime resume at the start of sd_probe() */ + return 0; + + sdp = sdkp->device; if (sdp->ignore_media_change) { /* clear the device's sense data */
After merging commit ed4246d37f3b ("scsi: sd: REQUEST SENSE for BLIST_IGN_MEDIA_CHANGE devices in runtime_resume()"), I hit the following crash on my device. static int sd_resume_runtime(struct device *dev) { struct scsi_disk *sdkp = dev_get_drvdata(dev); struct scsi_device *sdp = sdkp->device; // sdkp == NULL and crash if (sdp->ignore_media_change) { ... } I checked sd_resume() and found that sdkp is possbile to be NULL, and there is a null pointer test in sd_resume() for this case. To fix this crash, follow sd_resume() to test if sdkp is NULL before dereferencing it. Crash: [ 4.695171][ T151] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 [ 4.696591][ T151] Mem abort info: [ 4.697919][ T151] ESR = 0x96000005 [ 4.699692][ T151] EC = 0x25: DABT (current EL), IL = 32 bits [ 4.701990][ T151] SET = 0, FnV = 0 [ 4.702513][ T151] EA = 0, S1PTW = 0 [ 4.704431][ T151] FSC = 0x05: level 1 translation fault [ 4.705254][ T151] Data abort info: [ 4.705806][ T151] ISV = 0, ISS = 0x00000005 [ 4.706484][ T151] CM = 0, WnR = 0 [ 4.707048][ T151] [0000000000000008] user address but active_mm is swapper [ 4.710577][ T151] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 4.832361][ T151] Kernel Offset: 0x12acc80000 from 0xffffffc010000000 [ 4.833254][ T151] PHYS_OFFSET: 0x40000000 [ 4.833814][ T151] pstate: 80400005 (Nzcv daif +PAN -UAO) [ 4.834546][ T151] pc : sd_resume_runtime+0x20/0x14c [ 4.835227][ T151] lr : scsi_runtime_resume+0x84/0xe4 [ 4.835916][ T151] sp : ffffffc0110db8d0 [ 4.836450][ T151] x29: ffffffc0110db8d0 x28: 0000000000000001 [ 4.837258][ T151] x27: ffffff80c0bd1ac0 x26: ffffff80c0bd1ad0 [ 4.838063][ T151] x25: ffffff80cea7e448 x24: ffffffd2bf961000 [ 4.838867][ T151] x23: ffffffd2be69f838 x22: ffffffd2bd9dfb4c [ 4.839670][ T151] x21: 0000000000000000 x20: ffffff80cea7e000 [ 4.840474][ T151] x19: ffffff80cea7e260 x18: ffffffc0110dd078 [ 4.841277][ T151] x17: 00000000658783d9 x16: 0000000051469dac [ 4.842081][ T151] x15: 00000000b87f6327 x14: 0000000068fd680d [ 4.842885][ T151] x13: ffffff80c0bd2470 x12: ffffffd2bfa7f5f0 [ 4.843688][ T151] x11: 0000000000000078 x10: 0000000000000001 [ 4.844492][ T151] x9 : 00000000000000b1 x8 : ffffffd2be69f88c [ 4.845295][ T151] x7 : ffffffd2bd9e0e5c x6 : 0000000000000000 [ 4.846099][ T151] x5 : 0000000000000080 x4 : 0000000000000001 [ 4.846902][ T151] x3 : 68fd680dfe4ebe5e x2 : 0000000000000003 [ 4.847706][ T151] x1 : ffffffd2bf7f9380 x0 : ffffff80cea7e260 [ 4.856708][ T151] die+0x16c/0x59c [ 4.857191][ T151] __do_kernel_fault+0x1e8/0x210 [ 4.857833][ T151] do_page_fault+0xa4/0x654 [ 4.858418][ T151] do_translation_fault+0x6c/0x1b0 [ 4.859083][ T151] do_mem_abort+0x68/0x10c [ 4.859655][ T151] el1_abort+0x40/0x64 [ 4.860182][ T151] el1h_64_sync_handler+0x54/0x88 [ 4.860834][ T151] el1h_64_sync+0x7c/0x80 [ 4.861395][ T151] sd_resume_runtime+0x20/0x14c [ 4.862025][ T151] scsi_runtime_resume+0x84/0xe4 [ 4.862667][ T151] __rpm_callback+0x1f4/0x8cc [ 4.863275][ T151] rpm_resume+0x7e8/0xaa4 [ 4.863836][ T151] __pm_runtime_resume+0xa0/0x110 [ 4.864489][ T151] sd_probe+0x30/0x428 [ 4.865016][ T151] really_probe+0x14c/0x500 [ 4.865602][ T151] __driver_probe_device+0xb4/0x18c [ 4.866278][ T151] driver_probe_device+0x60/0x2c4 [ 4.866931][ T151] __device_attach_driver+0x228/0x2bc [ 4.867630][ T151] __device_attach_async_helper+0x154/0x21c [ 4.868398][ T151] async_run_entry_fn+0x5c/0x1c4 [ 4.869038][ T151] process_one_work+0x3ac/0x590 [ 4.869670][ T151] worker_thread+0x320/0x758 [ 4.870265][ T151] kthread+0x2e8/0x35c [ 4.870792][ T151] ret_from_fork+0x10/0x20 Cc: Stanley Chu <stanley.chu@mediatek.com> Fixes: ed4246d37f3b ("scsi: sd: REQUEST SENSE for BLIST_IGN_MEDIA_CHANGE devices in runtime_resume()") Signed-off-by: Miles Chen <miles.chen@mediatek.com> --- drivers/scsi/sd.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)