diff mbox series

net: ethernet: mtk_eth_soc: fix error checking in mtk_mac_config()

Message ID 20220108155003.3991055-1-trix@redhat.com (mailing list archive)
State New
Headers show
Series net: ethernet: mtk_eth_soc: fix error checking in mtk_mac_config() | expand

Commit Message

Tom Rix Jan. 8, 2022, 3:50 p.m. UTC
From: Tom Rix <trix@redhat.com>

Clang static analysis reports this problem
mtk_eth_soc.c:394:7: warning: Branch condition evaluates
  to a garbage value
                if (err)
                    ^~~

err is not initialized and only conditionally set.
Check err consistently with the rest of mtk_mac_config(),
after even possible setting.

Fixes: 7e538372694b ("net: ethernet: mediatek: Re-add support SGMII")
Signed-off-by: Tom Rix <trix@redhat.com>
---
 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

Comments

Jakub Kicinski Jan. 10, 2022, 12:43 a.m. UTC | #1
On Sat,  8 Jan 2022 07:50:03 -0800 trix@redhat.com wrote:
> From: Tom Rix <trix@redhat.com>
> 
> Clang static analysis reports this problem
> mtk_eth_soc.c:394:7: warning: Branch condition evaluates
>   to a garbage value
>                 if (err)
>                     ^~~
> 
> err is not initialized and only conditionally set.
> Check err consistently with the rest of mtk_mac_config(),
> after even possible setting.
> 
> Fixes: 7e538372694b ("net: ethernet: mediatek: Re-add support SGMII")
> Signed-off-by: Tom Rix <trix@redhat.com>
> ---
>  drivers/net/ethernet/mediatek/mtk_eth_soc.c | 12 +++++++-----
>  1 file changed, 7 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
> index b67b4323cff08..a27e548488584 100644
> --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
> +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
> @@ -385,14 +385,16 @@ static void mtk_mac_config(struct phylink_config *config, unsigned int mode,
>  		       0 : mac->id;
>  
>  		/* Setup SGMIISYS with the determined property */
> -		if (state->interface != PHY_INTERFACE_MODE_SGMII)
> +		if (state->interface != PHY_INTERFACE_MODE_SGMII) {
>  			err = mtk_sgmii_setup_mode_force(eth->sgmii, sid,
>  							 state);
> -		else if (phylink_autoneg_inband(mode))
> +			if (err)
> +				goto init_err;
> +		} else if (phylink_autoneg_inband(mode)) {
>  			err = mtk_sgmii_setup_mode_an(eth->sgmii, sid);
> -
> -		if (err)
> -			goto init_err;
> +			if (err)
> +				goto init_err;
> +		}
>  
>  		regmap_update_bits(eth->ethsys, ETHSYS_SYSCFG0,
>  				   SYSCFG0_SGMII_MASK, val);

Why not init err to 0 before the if or add an else err = 0; branch?
Tom Rix Jan. 10, 2022, 1:43 p.m. UTC | #2
On 1/9/22 4:43 PM, Jakub Kicinski wrote:
> On Sat,  8 Jan 2022 07:50:03 -0800 trix@redhat.com wrote:
>> From: Tom Rix <trix@redhat.com>
>>
>> Clang static analysis reports this problem
>> mtk_eth_soc.c:394:7: warning: Branch condition evaluates
>>    to a garbage value
>>                  if (err)
>>                      ^~~
>>
>> err is not initialized and only conditionally set.
>> Check err consistently with the rest of mtk_mac_config(),
>> after even possible setting.
>>
>> Fixes: 7e538372694b ("net: ethernet: mediatek: Re-add support SGMII")
>> Signed-off-by: Tom Rix <trix@redhat.com>
>> ---
>>   drivers/net/ethernet/mediatek/mtk_eth_soc.c | 12 +++++++-----
>>   1 file changed, 7 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
>> index b67b4323cff08..a27e548488584 100644
>> --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
>> +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
>> @@ -385,14 +385,16 @@ static void mtk_mac_config(struct phylink_config *config, unsigned int mode,
>>   		       0 : mac->id;
>>   
>>   		/* Setup SGMIISYS with the determined property */
>> -		if (state->interface != PHY_INTERFACE_MODE_SGMII)
>> +		if (state->interface != PHY_INTERFACE_MODE_SGMII) {
>>   			err = mtk_sgmii_setup_mode_force(eth->sgmii, sid,
>>   							 state);
>> -		else if (phylink_autoneg_inband(mode))
>> +			if (err)
>> +				goto init_err;
>> +		} else if (phylink_autoneg_inband(mode)) {
>>   			err = mtk_sgmii_setup_mode_an(eth->sgmii, sid);
>> -
>> -		if (err)
>> -			goto init_err;
>> +			if (err)
>> +				goto init_err;
>> +		}
>>   
>>   		regmap_update_bits(eth->ethsys, ETHSYS_SYSCFG0,
>>   				   SYSCFG0_SGMII_MASK, val);
> Why not init err to 0 before the if or add an else err = 0; branch?

This is the way I would have preferred to do it but the function's 
existing error handling does it this way.

I'll respin the patch.

Tom


>
diff mbox series

Patch

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index b67b4323cff08..a27e548488584 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -385,14 +385,16 @@  static void mtk_mac_config(struct phylink_config *config, unsigned int mode,
 		       0 : mac->id;
 
 		/* Setup SGMIISYS with the determined property */
-		if (state->interface != PHY_INTERFACE_MODE_SGMII)
+		if (state->interface != PHY_INTERFACE_MODE_SGMII) {
 			err = mtk_sgmii_setup_mode_force(eth->sgmii, sid,
 							 state);
-		else if (phylink_autoneg_inband(mode))
+			if (err)
+				goto init_err;
+		} else if (phylink_autoneg_inband(mode)) {
 			err = mtk_sgmii_setup_mode_an(eth->sgmii, sid);
-
-		if (err)
-			goto init_err;
+			if (err)
+				goto init_err;
+		}
 
 		regmap_update_bits(eth->ethsys, ETHSYS_SYSCFG0,
 				   SYSCFG0_SGMII_MASK, val);