@@ -49,12 +49,12 @@ struct mac_delay_struct {
struct mediatek_dwmac_plat_data {
const struct mediatek_dwmac_variant *variant;
struct mac_delay_struct mac_delay;
+ struct clk *rmii_internal_clk;
struct clk_bulk_data *clks;
- struct device_node *np;
struct regmap *peri_regmap;
+ struct device_node *np;
struct device *dev;
phy_interface_t phy_mode;
- int num_clks_to_config;
bool rmii_clk_from_mac;
bool rmii_rxc;
};
@@ -74,7 +74,7 @@ struct mediatek_dwmac_variant {
/* list of clocks required for mac */
static const char * const mt2712_dwmac_clk_l[] = {
- "axi", "apb", "mac_main", "ptp_ref", "rmii_internal"
+ "axi", "apb", "mac_main", "ptp_ref"
};
static int mt2712_set_interface(struct mediatek_dwmac_plat_data *plat)
@@ -83,23 +83,12 @@ static int mt2712_set_interface(struct mediatek_dwmac_plat_data *plat)
int rmii_rxc = plat->rmii_rxc ? RMII_CLK_SRC_RXC : 0;
u32 intf_val = 0;
- /* The clock labeled as "rmii_internal" in mt2712_dwmac_clk_l is needed
- * only in RMII(when MAC provides the reference clock), and useless for
- * RGMII/MII/RMII(when PHY provides the reference clock).
- * num_clks_to_config indicates the real number of clocks should be
- * configured, equals to (plat->variant->num_clks - 1) in default for all the case,
- * then +1 for rmii_clk_from_mac case.
- */
- plat->num_clks_to_config = plat->variant->num_clks - 1;
-
/* select phy interface in top control domain */
switch (plat->phy_mode) {
case PHY_INTERFACE_MODE_MII:
intf_val |= PHY_INTF_MII;
break;
case PHY_INTERFACE_MODE_RMII:
- if (plat->rmii_clk_from_mac)
- plat->num_clks_to_config++;
intf_val |= (PHY_INTF_RMII | rmii_rxc | rmii_clk_from_mac);
break;
case PHY_INTERFACE_MODE_RGMII:
@@ -314,18 +303,34 @@ static int mediatek_dwmac_config_dt(struct mediatek_dwmac_plat_data *plat)
static int mediatek_dwmac_clk_init(struct mediatek_dwmac_plat_data *plat)
{
const struct mediatek_dwmac_variant *variant = plat->variant;
- int i, num = variant->num_clks;
+ int i, ret;
- plat->clks = devm_kcalloc(plat->dev, num, sizeof(*plat->clks), GFP_KERNEL);
+ plat->clks = devm_kcalloc(plat->dev, variant->num_clks, sizeof(*plat->clks), GFP_KERNEL);
if (!plat->clks)
return -ENOMEM;
- for (i = 0; i < num; i++)
+ for (i = 0; i < variant->num_clks; i++)
plat->clks[i].id = variant->clk_list[i];
- plat->num_clks_to_config = variant->num_clks;
+ ret = devm_clk_bulk_get(plat->dev, variant->num_clks, plat->clks);
+ if (ret)
+ return ret;
- return devm_clk_bulk_get(plat->dev, num, plat->clks);
+ /* The clock labeled as "rmii_internal" is needed only in RMII(when
+ * MAC provides the reference clock), and useless for RGMII/MII or
+ * RMII(when PHY provides the reference clock).
+ * So, "rmii_internal" clock is got and configured only when
+ * reference clock of RMII is from MAC.
+ */
+ if (plat->rmii_clk_from_mac) {
+ plat->rmii_internal_clk = devm_clk_get(plat->dev, "rmii_internal");
+ if (IS_ERR(plat->rmii_internal_clk))
+ ret = PTR_ERR(plat->rmii_internal_clk);
+ } else {
+ plat->rmii_internal_clk = NULL;
+ }
+
+ return ret;
}
static int mediatek_dwmac_init(struct platform_device *pdev, void *priv)
@@ -350,35 +355,55 @@ static int mediatek_dwmac_init(struct platform_device *pdev, void *priv)
}
}
- ret = clk_bulk_prepare_enable(plat->num_clks_to_config, plat->clks);
+ ret = clk_bulk_prepare_enable(variant->num_clks, plat->clks);
if (ret) {
dev_err(plat->dev, "failed to enable clks, err = %d\n", ret);
return ret;
}
+ ret = clk_prepare_enable(plat->rmii_internal_clk);
+ if (ret) {
+ dev_err(plat->dev, "failed to enable rmii internal clk, err = %d\n", ret);
+ goto err_clk;
+ }
+
return 0;
+
+err_clk:
+ clk_bulk_disable_unprepare(variant->num_clks, plat->clks);
+ return ret;
}
static void mediatek_dwmac_exit(struct platform_device *pdev, void *priv)
{
struct mediatek_dwmac_plat_data *plat = priv;
+ const struct mediatek_dwmac_variant *variant = plat->variant;
- clk_bulk_disable_unprepare(plat->num_clks_to_config, plat->clks);
+ clk_disable_unprepare(plat->rmii_internal_clk);
+ clk_bulk_disable_unprepare(variant->num_clks, plat->clks);
}
static int mediatek_dwmac_clks_config(void *priv, bool enabled)
{
struct mediatek_dwmac_plat_data *plat = priv;
+ const struct mediatek_dwmac_variant *variant = plat->variant;
int ret = 0;
if (enabled) {
- ret = clk_bulk_prepare_enable(plat->num_clks_to_config, plat->clks);
+ ret = clk_bulk_prepare_enable(variant->num_clks, plat->clks);
if (ret) {
dev_err(plat->dev, "failed to enable clks, err = %d\n", ret);
return ret;
}
+
+ ret = clk_prepare_enable(plat->rmii_internal_clk);
+ if (ret) {
+ dev_err(plat->dev, "failed to enable rmii internal clk, err = %d\n", ret);
+ return ret;
+ }
} else {
- clk_bulk_disable_unprepare(plat->num_clks_to_config, plat->clks);
+ clk_disable_unprepare(plat->rmii_internal_clk);
+ clk_bulk_disable_unprepare(variant->num_clks, plat->clks);
}
return ret;
The rmii_internal clock is needed only when PHY interface is RMII, and reference clock is from MAC. Re-arrange the clock setting as following: 1. the optional "rmii_internal" is controlled by devm_clk_get(), 2. other clocks still be configured by devm_clk_bulk_get(). Signed-off-by: Biao Huang <biao.huang@mediatek.com> --- .../ethernet/stmicro/stmmac/dwmac-mediatek.c | 71 +++++++++++++------ 1 file changed, 48 insertions(+), 23 deletions(-)