| Message ID | 20220327165837.3048639-3-fparent@baylibre.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add support for MediaTek MT8195 demo board | expand |
On 27/03/2022 18:58, Fabien Parent wrote: > Add basic device-tree for the MT8195 Demo board. The > Demo board is made by MediaTek and has a MT8195 SoC, > associated with the MT6359 and MT6360 PMICs, and > the MT7921 connectivity chip. > > The IOs available on that board are: > * 1 USB Type-C connector with DP aux mode support > * 1 USB Type-A connector > * 1 full size HDMI RX and 1 full size HDMI TX connector > * 1 uSD slot > * 40 pins header > * SPI interface header > * 1 M.2 slot > * 1 audio jack > * 1 micro-USB port for serial debug > * 2 connectors for DSI displays > * 3 connectors for CSI cameras > * 1 connector for a eDP panel > * 1 MMC storage > > This commit adds basic support in order to be able to boot. > > Signed-off-by: Fabien Parent <fparent@baylibre.com> > --- > This patch depends on the following patches: > [0] https://patchwork.kernel.org/project/linux-mediatek/patch/1622011927-359-9-git-send-email-hsin-hsiung.wang@mediatek.com/ > [1] https://patchwork.kernel.org/project/linux-mediatek/patch/20220216113131.13145-4-tinghan.shen@mediatek.com/ > > arch/arm64/boot/dts/mediatek/Makefile | 1 + > arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 539 +++++++++++++++++++ > 2 files changed, 540 insertions(+) > create mode 100644 arch/arm64/boot/dts/mediatek/mt8195-demo.dts > > diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile > index 5da29e7223e4..c7d4636a2cb7 100644 > --- a/arch/arm64/boot/dts/mediatek/Makefile > +++ b/arch/arm64/boot/dts/mediatek/Makefile > @@ -38,5 +38,6 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb > diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts > new file mode 100644 > index 000000000000..f486cdf7e22b > --- /dev/null > +++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts > @@ -0,0 +1,539 @@ > +// SPDX-License-Identifier: (GPL-2.0 OR MIT) > +/* > + * Copyright (C) 2022 BayLibre, SAS. > + * Author: Fabien Parent <fparent@baylibre.com> > + */ > +/dts-v1/; > + > +#include "mt8195.dtsi" > +#include "mt6359.dtsi" > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/pinctrl/mt8195-pinfunc.h> > +#include <dt-bindings/regulator/mediatek,mt6360-regulator.h> > + > +/ { > + model = "MediaTek MT8195 demo board"; > + compatible = "mediatek,mt8195-demo", "mediatek,mt8195"; > + > + aliases { > + serial0 = &uart0; > + }; > + > + chosen { > + stdout-path = "serial0:921600n8"; > + }; > + > + memory@40000000 { > + device_type = "memory"; > + reg = <0 0x40000000 0 0x80000000>; > + }; > + > + reserved-memory { > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + /* 12 MiB reserved for OP-TEE (BL32) > + * +-----------------------+ 0x43e0_0000 > + * | SHMEM 2MiB | > + * +-----------------------+ 0x43c0_0000 > + * | | TA_RAM 8MiB | > + * + TZDRAM +--------------+ 0x4340_0000 > + * | | TEE_RAM 2MiB | > + * +-----------------------+ 0x4320_0000 > + */ > + optee_reserved: optee@43200000 { > + no-map; > + reg = <0 0x43200000 0 0x00c00000>; > + }; > + > + /* 192 KiB reserved for ARM Trusted Firmware (BL31) */ > + bl31_secmon_reserved: secmon@54600000 { > + no-map; > + reg = <0 0x54600000 0x0 0x30000>; > + }; > + }; > + > + firmware { > + optee { > + compatible = "linaro,optee-tz"; > + method = "smc"; > + }; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + input-name = "gpio-keys"; > + pinctrl-names = "default"; > + pinctrl-0 = <&gpio_keys>; > + > + volume-up { Generic node names, so "key" or "key-0" > + gpios = <&pio 106 GPIO_ACTIVE_LOW>; > + label = "volume_up"; > + linux,code = <KEY_VOLUMEUP>; > + wakeup-source; > + debounce-interval = <15>; > + }; > + }; > +}; > + > +&uart0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart0_pins>; > + status = "okay"; > +}; > + > +&mmc0 { > + status = "okay"; > + pinctrl-names = "default", "state_uhs"; > + pinctrl-0 = <&mmc0_pins_default>; > + pinctrl-1 = <&mmc0_pins_uhs>; > + bus-width = <8>; > + max-frequency = <200000000>; > + cap-mmc-highspeed; > + mmc-hs200-1_8v; > + mmc-hs400-1_8v; > + cap-mmc-hw-reset; > + no-sdio; > + no-sd; > + hs400-ds-delay = <0x14c11>; > + vmmc-supply = <&mt6359_vemc_1_ldo_reg>; > + vqmmc-supply = <&mt6359_vufs_ldo_reg>; > + non-removable; > +}; > + > +&pmic { > + interrupt-parent = <&pio>; > + interrupts = <222 IRQ_TYPE_LEVEL_HIGH>; > +}; > + > +&i2c0 { > + clock-frequency = <400000>; > + pinctrl-0 = <&i2c0_pins>; > + pinctrl-names = "default"; > + status = "okay"; What's attached here? Enabling empty i2c controller? > +}; > + > +&i2c1 { > + clock-frequency = <400000>; > + pinctrl-0 = <&i2c1_pins>; > + pinctrl-names = "default"; > + status = "okay"; What's attached here? Enabling empty i2c node? > +}; > + > +&i2c2 { > + clock-frequency = <400000>; > + pinctrl-0 = <&i2c2_pins>; > + pinctrl-names = "default"; > + status = "okay"; What's attached here? Enabling empty i2c node? > +}; > + > +&i2c6 { > + clock-frequency = <400000>; > + pinctrl-0 = <&i2c6_pins>; > + pinctrl-names = "default"; > + status = "okay"; > + > + mt6360: mt6360@34 { Generic node names, so "pmic"? > + compatible = "mediatek,mt6360"; > + reg = <0x34>; > + interrupt-controller; > + interrupt-parent = <&pio>; > + interrupts = <101 IRQ_TYPE_EDGE_FALLING>; > + interrupt-names = "IRQB"; > + > + charger { > + compatible = "mediatek,mt6360-chg"; > + richtek,vinovp-microvolt = <14500000>; > + > + otg_vbus_regulator: usb-otg-vbus-regulator { > + regulator-compatible = "usb-otg-vbus"; > + regulator-name = "usb-otg-vbus"; > + regulator-min-microvolt = <4425000>; > + regulator-max-microvolt = <5825000>; > + }; > + }; > + > + regulator { > + compatible = "mediatek,mt6360-regulator"; > + LDO_VIN3-supply = <&mt6360_buck2>; > + > + mt6360_buck1: buck1 { > + regulator-compatible = "BUCK1"; > + regulator-name = "mt6360,buck1"; > + regulator-min-microvolt = <300000>; > + regulator-max-microvolt = <1300000>; > + regulator-allowed-modes = <MT6360_OPMODE_NORMAL > + MT6360_OPMODE_LP > + MT6360_OPMODE_ULP>; > + regulator-always-on; > + }; > + > + mt6360_buck2: buck2 { > + regulator-compatible = "BUCK2"; > + regulator-name = "mt6360,buck2"; > + regulator-min-microvolt = <300000>; > + regulator-max-microvolt = <1300000>; > + regulator-allowed-modes = <MT6360_OPMODE_NORMAL > + MT6360_OPMODE_LP > + MT6360_OPMODE_ULP>; > + regulator-always-on; > + }; > + > + mt6360_ldo1: ldo1 { > + regulator-compatible = "LDO1"; > + regulator-name = "mt6360,ldo1"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <3600000>; > + regulator-allowed-modes = <MT6360_OPMODE_NORMAL > + MT6360_OPMODE_LP>; > + }; > + > + mt6360_ldo2: ldo2 { > + regulator-compatible = "LDO2"; > + regulator-name = "mt6360,ldo2"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <3600000>; > + regulator-allowed-modes = <MT6360_OPMODE_NORMAL > + MT6360_OPMODE_LP>; > + }; > + > + mt6360_ldo3: ldo3 { > + regulator-compatible = "LDO3"; > + regulator-name = "mt6360,ldo3"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <3600000>; > + regulator-allowed-modes = <MT6360_OPMODE_NORMAL > + MT6360_OPMODE_LP>; > + }; > + > + mt6360_ldo5: ldo5 { > + regulator-compatible = "LDO5"; > + regulator-name = "mt6360,ldo5"; > + regulator-min-microvolt = <2700000>; > + regulator-max-microvolt = <3600000>; > + regulator-allowed-modes = <MT6360_OPMODE_NORMAL > + MT6360_OPMODE_LP>; > + }; > + > + mt6360_ldo6: ldo6 { > + regulator-compatible = "LDO6"; > + regulator-name = "mt6360,ldo6"; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <2100000>; > + regulator-allowed-modes = <MT6360_OPMODE_NORMAL > + MT6360_OPMODE_LP>; > + }; > + > + mt6360_ldo7: ldo7 { > + regulator-compatible = "LDO7"; > + regulator-name = "mt6360,ldo7"; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <2100000>; > + regulator-allowed-modes = <MT6360_OPMODE_NORMAL > + MT6360_OPMODE_LP>; > + regulator-always-on; > + }; > + }; > + }; > +}; > + > +&spi2 { > + pinctrl-0 = <&spi2_pins>; > + pinctrl-names = "default"; > + mediatek,pad-select = <0>; > + status = "okay"; What is attached here? Empty SPI? > +}; > + > +&mt6359_vgpu11_buck_reg { > + regulator-always-on; > +}; > + > +&mt6359_vsram_others_ldo_reg { > + regulator-always-on; > +}; > + > +&mt6359_vpu_buck_reg { > + regulator-always-on; > +}; > + > +&mt6359_vcore_buck_reg { > + regulator-always-on; > +}; > + > +&mt6359_vproc1_buck_reg { > + regulator-always-on; > +}; > + > +&mt6359_vproc2_buck_reg { > + regulator-always-on; > +}; > + > +&mt6359_vsram_md_ldo_reg { > + regulator-always-on; > +}; > + > +&mt6359_vbbck_ldo_reg { > + regulator-always-on; > +}; > + > +&mt6359_vrf12_ldo_reg { > + regulator-always-on; > +}; > + > +&mmc1 { Any reasons to have all overrides/labels ordered randomly? I am not dreaming about alphabetical order, but at least some logical, so mmc1 next to mmc0... > + pinctrl-names = "default", "state_uhs"; > + pinctrl-0 = <&mmc1_pins_default>; > + pinctrl-1 = <&mmc1_pins_uhs>; > + cd-gpios = <&pio 129 GPIO_ACTIVE_LOW>; > + bus-width = <4>; > + max-frequency = <200000000>; > + cap-sd-highspeed; > + sd-uhs-sdr50; > + sd-uhs-sdr104; > + vmmc-supply = <&mt6360_ldo5>; > + vqmmc-supply = <&mt6360_ldo3>; > + status = "okay"; > +}; > + > +&xhci0 { > + vusb33-supply = <&mt6359_vusb_ldo_reg>; > + vbus-supply = <&otg_vbus_regulator>; > + status = "okay"; > +}; > + > +&xhci1 { > + vusb33-supply = <&mt6359_vusb_ldo_reg>; > + status = "okay"; > +}; > + > +&xhci2 { > + vusb33-supply = <&mt6359_vusb_ldo_reg>; > + status = "okay"; > +}; > + > +&xhci3 { > + vusb33-supply = <&mt6359_vusb_ldo_reg>; > + status = "okay"; > +}; > + > +&u3phy0 { > + status = "okay"; > +}; > + > +&u3phy1 { > + status = "okay"; > +}; > + > +&u3phy2 { > + status = "okay"; > +}; > + > +&u3phy3 { > + status = "okay"; > +}; > + > +&pio { > + mmc0_pins_default: mmc0default { > + pins_cmd_dat { No underscores in node names. Hyphens are accepted. Same in all other cases below. > + pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>, > + <PINMUX_GPIO125__FUNC_MSDC0_DAT1>, > + <PINMUX_GPIO124__FUNC_MSDC0_DAT2>, > + <PINMUX_GPIO123__FUNC_MSDC0_DAT3>, > + <PINMUX_GPIO119__FUNC_MSDC0_DAT4>, > + <PINMUX_GPIO118__FUNC_MSDC0_DAT5>, > + <PINMUX_GPIO117__FUNC_MSDC0_DAT6>, > + <PINMUX_GPIO116__FUNC_MSDC0_DAT7>, > + <PINMUX_GPIO121__FUNC_MSDC0_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_6mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > + }; > + > + pins_clk { > + pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>; > + drive-strength = <MTK_DRIVE_6mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_rst { > + pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>; > + drive-strength = <MTK_DRIVE_6mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > + }; > + }; > + > + mmc0_pins_uhs: mmc0uhs{ > + pins_cmd_dat { > + pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>, > + <PINMUX_GPIO125__FUNC_MSDC0_DAT1>, > + <PINMUX_GPIO124__FUNC_MSDC0_DAT2>, > + <PINMUX_GPIO123__FUNC_MSDC0_DAT3>, > + <PINMUX_GPIO119__FUNC_MSDC0_DAT4>, > + <PINMUX_GPIO118__FUNC_MSDC0_DAT5>, > + <PINMUX_GPIO117__FUNC_MSDC0_DAT6>, > + <PINMUX_GPIO116__FUNC_MSDC0_DAT7>, > + <PINMUX_GPIO121__FUNC_MSDC0_CMD>; > + input-enable; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > + }; > + > + pins_clk { > + pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_ds { > + pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_rst { > + pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > + }; > + }; > + > + mmc1_pins_default: mmc1-pins-default { > + pins_cmd_dat { > + pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>, > + <PINMUX_GPIO112__FUNC_MSDC1_DAT0>, > + <PINMUX_GPIO113__FUNC_MSDC1_DAT1>, > + <PINMUX_GPIO114__FUNC_MSDC1_DAT2>, > + <PINMUX_GPIO115__FUNC_MSDC1_DAT3>; > + input-enable; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > + }; > + > + pins_clk { > + pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > + }; > + > + pins_insert { > + pinmux = <PINMUX_GPIO129__FUNC_GPIO129>; > + bias-pull-up; > + }; > + }; > + > + mmc1_pins_uhs: mmc1-pins-uhs { Any reason keeping it inconsistent with mmc0 about naming? I mean... why having one naming pattern for mmc0 and entirely different for mmc1? Why i2c ends with "-pins" suffix and these do not? > + pins_cmd_dat { > + pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>, > + <PINMUX_GPIO112__FUNC_MSDC1_DAT0>, > + <PINMUX_GPIO113__FUNC_MSDC1_DAT1>, > + <PINMUX_GPIO114__FUNC_MSDC1_DAT2>, > + <PINMUX_GPIO115__FUNC_MSDC1_DAT3>; > + input-enable; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > + }; > + > + pins_clk { > + pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>; > + drive-strength = <MTK_DRIVE_8mA>; > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > + }; > + }; > + > + i2c0_pins: i2c0-pins { > + pins { > + pinmux = <PINMUX_GPIO8__FUNC_SDA0>, > + <PINMUX_GPIO9__FUNC_SCL0>; > + bias-pull-up; > + mediatek,rsel = <MTK_PULL_SET_RSEL_111>; > + mediatek,drive-strength-adv = <7>; > + }; > + }; > + > + i2c1_pins: i2c1-pins { > + pins { > + pinmux = <PINMUX_GPIO10__FUNC_SDA1>, > + <PINMUX_GPIO11__FUNC_SCL1>; > + bias-pull-up; > + mediatek,rsel = <MTK_PULL_SET_RSEL_111>; > + mediatek,drive-strength-adv = <7>; > + }; > + }; > + > + i2c2_pins: i2c2-pins { > + pins { > + pinmux = <PINMUX_GPIO12__FUNC_SDA2>, > + <PINMUX_GPIO13__FUNC_SCL2>; > + bias-pull-up; > + mediatek,rsel = <MTK_PULL_SET_RSEL_111>; > + mediatek,drive-strength-adv = <7>; > + }; > + }; > + > + i2c6_pins: i2c6-pin { > + pins { > + pinmux = <PINMUX_GPIO25__FUNC_SDA6>, > + <PINMUX_GPIO26__FUNC_SCL6>; > + bias-pull-up; > + mediatek,rsel = <MTK_PULL_SET_RSEL_111>; > + }; > + }; > + > + spi2_pins: spi-pins { > + pins { > + pinmux = <PINMUX_GPIO140__FUNC_SPIM2_CSB>, > + <PINMUX_GPIO141__FUNC_SPIM2_CLK>, > + <PINMUX_GPIO142__FUNC_SPIM2_MO>, > + <PINMUX_GPIO143__FUNC_SPIM2_MI>; > + bias-disable; > + }; > + }; > + > + pcie0_pins_default: pcie0default { > + pins { > + pinmux = <PINMUX_GPIO19__FUNC_WAKEN>, > + <PINMUX_GPIO20__FUNC_PERSTN>, > + <PINMUX_GPIO21__FUNC_CLKREQN>; > + bias-pull-up; > + }; > + }; > + > + pcie1_pins_default: pcie1default { No pins suffix? One more pattern of naming... > + pins { > + pinmux = <PINMUX_GPIO22__FUNC_PERSTN_1>, > + <PINMUX_GPIO23__FUNC_CLKREQN_1>, > + <PINMUX_GPIO24__FUNC_WAKEN_1>; > + bias-pull-up; > + }; > + > + mt7921 { > + pinmux = <PINMUX_GPIO65__FUNC_GPIO65>, > + <PINMUX_GPIO67__FUNC_GPIO67>; > + output-high; > + }; > + }; > + > + gpio_keys: gpio-keys { gpio-keys-pins > + pins { > + pinmux = <PINMUX_GPIO106__FUNC_GPIO106>; > + input-enable; > + }; > + }; > + Best regards, Krzysztof
Hi Krzysztof, On Sun, Mar 27, 2022 at 08:52:41PM +0200, Krzysztof Kozlowski wrote: > On 27/03/2022 18:58, Fabien Parent wrote: > > Add basic device-tree for the MT8195 Demo board. The > > Demo board is made by MediaTek and has a MT8195 SoC, > > associated with the MT6359 and MT6360 PMICs, and > > the MT7921 connectivity chip. > > > > The IOs available on that board are: > > * 1 USB Type-C connector with DP aux mode support > > * 1 USB Type-A connector > > * 1 full size HDMI RX and 1 full size HDMI TX connector > > * 1 uSD slot > > * 40 pins header > > * SPI interface header > > * 1 M.2 slot > > * 1 audio jack > > * 1 micro-USB port for serial debug > > * 2 connectors for DSI displays > > * 3 connectors for CSI cameras > > * 1 connector for a eDP panel > > * 1 MMC storage > > > > This commit adds basic support in order to be able to boot. > > > > Signed-off-by: Fabien Parent <fparent@baylibre.com> > > --- > > This patch depends on the following patches: > > [0] https://patchwork.kernel.org/project/linux-mediatek/patch/1622011927-359-9-git-send-email-hsin-hsiung.wang@mediatek.com/ > > [1] https://patchwork.kernel.org/project/linux-mediatek/patch/20220216113131.13145-4-tinghan.shen@mediatek.com/ > > > > arch/arm64/boot/dts/mediatek/Makefile | 1 + > > arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 539 +++++++++++++++++++ > > 2 files changed, 540 insertions(+) > > create mode 100644 arch/arm64/boot/dts/mediatek/mt8195-demo.dts > > > > diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile > > index 5da29e7223e4..c7d4636a2cb7 100644 > > --- a/arch/arm64/boot/dts/mediatek/Makefile > > +++ b/arch/arm64/boot/dts/mediatek/Makefile > > @@ -38,5 +38,6 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb > > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb > > dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb > > diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts > > new file mode 100644 > > index 000000000000..f486cdf7e22b > > --- /dev/null > > +++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts > > @@ -0,0 +1,539 @@ > > +// SPDX-License-Identifier: (GPL-2.0 OR MIT) > > +/* > > + * Copyright (C) 2022 BayLibre, SAS. > > + * Author: Fabien Parent <fparent@baylibre.com> > > + */ > > +/dts-v1/; > > + > > +#include "mt8195.dtsi" > > +#include "mt6359.dtsi" > > + > > +#include <dt-bindings/gpio/gpio.h> > > +#include <dt-bindings/input/input.h> > > +#include <dt-bindings/pinctrl/mt8195-pinfunc.h> > > +#include <dt-bindings/regulator/mediatek,mt6360-regulator.h> > > + > > +/ { > > + model = "MediaTek MT8195 demo board"; > > + compatible = "mediatek,mt8195-demo", "mediatek,mt8195"; > > + > > + aliases { > > + serial0 = &uart0; > > + }; > > + > > + chosen { > > + stdout-path = "serial0:921600n8"; > > + }; > > + > > + memory@40000000 { > > + device_type = "memory"; > > + reg = <0 0x40000000 0 0x80000000>; > > + }; > > + > > + reserved-memory { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + ranges; > > + > > + /* 12 MiB reserved for OP-TEE (BL32) > > + * +-----------------------+ 0x43e0_0000 > > + * | SHMEM 2MiB | > > + * +-----------------------+ 0x43c0_0000 > > + * | | TA_RAM 8MiB | > > + * + TZDRAM +--------------+ 0x4340_0000 > > + * | | TEE_RAM 2MiB | > > + * +-----------------------+ 0x4320_0000 > > + */ > > + optee_reserved: optee@43200000 { > > + no-map; > > + reg = <0 0x43200000 0 0x00c00000>; > > + }; > > + > > + /* 192 KiB reserved for ARM Trusted Firmware (BL31) */ > > + bl31_secmon_reserved: secmon@54600000 { > > + no-map; > > + reg = <0 0x54600000 0x0 0x30000>; > > + }; > > + }; > > + > > + firmware { > > + optee { > > + compatible = "linaro,optee-tz"; > > + method = "smc"; > > + }; > > + }; > > + > > + gpio-keys { > > + compatible = "gpio-keys"; > > + input-name = "gpio-keys"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&gpio_keys>; > > + > > + volume-up { > > Generic node names, so "key" or "key-0" > > > + gpios = <&pio 106 GPIO_ACTIVE_LOW>; > > + label = "volume_up"; > > + linux,code = <KEY_VOLUMEUP>; > > + wakeup-source; > > + debounce-interval = <15>; > > + }; > > + }; > > +}; > > + > > +&uart0 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&uart0_pins>; > > + status = "okay"; > > +}; > > + > > +&mmc0 { > > + status = "okay"; > > + pinctrl-names = "default", "state_uhs"; > > + pinctrl-0 = <&mmc0_pins_default>; > > + pinctrl-1 = <&mmc0_pins_uhs>; > > + bus-width = <8>; > > + max-frequency = <200000000>; > > + cap-mmc-highspeed; > > + mmc-hs200-1_8v; > > + mmc-hs400-1_8v; > > + cap-mmc-hw-reset; > > + no-sdio; > > + no-sd; > > + hs400-ds-delay = <0x14c11>; > > + vmmc-supply = <&mt6359_vemc_1_ldo_reg>; > > + vqmmc-supply = <&mt6359_vufs_ldo_reg>; > > + non-removable; > > +}; > > + > > +&pmic { > > + interrupt-parent = <&pio>; > > + interrupts = <222 IRQ_TYPE_LEVEL_HIGH>; > > +}; > > + > > +&i2c0 { > > + clock-frequency = <400000>; > > + pinctrl-0 = <&i2c0_pins>; > > + pinctrl-names = "default"; > > + status = "okay"; > > What's attached here? Enabling empty i2c controller? It is attached to CSI cameras but the CSI IP is not yet supported on MT8195. I will remove the node for the time being. > > > +}; > > + > > +&i2c1 { > > + clock-frequency = <400000>; > > + pinctrl-0 = <&i2c1_pins>; > > + pinctrl-names = "default"; > > + status = "okay"; > > What's attached here? Enabling empty i2c node? It is also attached to CSI cameras but the CSI IP is not yet supported on MT8195. I will remove the node for the time being. > > +}; > > + > > +&i2c2 { > > + clock-frequency = <400000>; > > + pinctrl-0 = <&i2c2_pins>; > > + pinctrl-names = "default"; > > + status = "okay"; > > What's attached here? Enabling empty i2c node? It is attached to an IT5205 chip which is not yet supported upstream. I will remove the node for the time being. > > +}; > > + > > +&i2c6 { > > + clock-frequency = <400000>; > > + pinctrl-0 = <&i2c6_pins>; > > + pinctrl-names = "default"; > > + status = "okay"; > > + > > + mt6360: mt6360@34 { > > Generic node names, so "pmic"? > > > + compatible = "mediatek,mt6360"; > > + reg = <0x34>; > > + interrupt-controller; > > + interrupt-parent = <&pio>; > > + interrupts = <101 IRQ_TYPE_EDGE_FALLING>; > > + interrupt-names = "IRQB"; > > + > > + charger { > > + compatible = "mediatek,mt6360-chg"; > > + richtek,vinovp-microvolt = <14500000>; > > + > > + otg_vbus_regulator: usb-otg-vbus-regulator { > > + regulator-compatible = "usb-otg-vbus"; > > + regulator-name = "usb-otg-vbus"; > > + regulator-min-microvolt = <4425000>; > > + regulator-max-microvolt = <5825000>; > > + }; > > + }; > > + > > + regulator { > > + compatible = "mediatek,mt6360-regulator"; > > + LDO_VIN3-supply = <&mt6360_buck2>; > > + > > + mt6360_buck1: buck1 { > > + regulator-compatible = "BUCK1"; > > + regulator-name = "mt6360,buck1"; > > + regulator-min-microvolt = <300000>; > > + regulator-max-microvolt = <1300000>; > > + regulator-allowed-modes = <MT6360_OPMODE_NORMAL > > + MT6360_OPMODE_LP > > + MT6360_OPMODE_ULP>; > > + regulator-always-on; > > + }; > > + > > + mt6360_buck2: buck2 { > > + regulator-compatible = "BUCK2"; > > + regulator-name = "mt6360,buck2"; > > + regulator-min-microvolt = <300000>; > > + regulator-max-microvolt = <1300000>; > > + regulator-allowed-modes = <MT6360_OPMODE_NORMAL > > + MT6360_OPMODE_LP > > + MT6360_OPMODE_ULP>; > > + regulator-always-on; > > + }; > > + > > + mt6360_ldo1: ldo1 { > > + regulator-compatible = "LDO1"; > > + regulator-name = "mt6360,ldo1"; > > + regulator-min-microvolt = <1200000>; > > + regulator-max-microvolt = <3600000>; > > + regulator-allowed-modes = <MT6360_OPMODE_NORMAL > > + MT6360_OPMODE_LP>; > > + }; > > + > > + mt6360_ldo2: ldo2 { > > + regulator-compatible = "LDO2"; > > + regulator-name = "mt6360,ldo2"; > > + regulator-min-microvolt = <1200000>; > > + regulator-max-microvolt = <3600000>; > > + regulator-allowed-modes = <MT6360_OPMODE_NORMAL > > + MT6360_OPMODE_LP>; > > + }; > > + > > + mt6360_ldo3: ldo3 { > > + regulator-compatible = "LDO3"; > > + regulator-name = "mt6360,ldo3"; > > + regulator-min-microvolt = <1200000>; > > + regulator-max-microvolt = <3600000>; > > + regulator-allowed-modes = <MT6360_OPMODE_NORMAL > > + MT6360_OPMODE_LP>; > > + }; > > + > > + mt6360_ldo5: ldo5 { > > + regulator-compatible = "LDO5"; > > + regulator-name = "mt6360,ldo5"; > > + regulator-min-microvolt = <2700000>; > > + regulator-max-microvolt = <3600000>; > > + regulator-allowed-modes = <MT6360_OPMODE_NORMAL > > + MT6360_OPMODE_LP>; > > + }; > > + > > + mt6360_ldo6: ldo6 { > > + regulator-compatible = "LDO6"; > > + regulator-name = "mt6360,ldo6"; > > + regulator-min-microvolt = <500000>; > > + regulator-max-microvolt = <2100000>; > > + regulator-allowed-modes = <MT6360_OPMODE_NORMAL > > + MT6360_OPMODE_LP>; > > + }; > > + > > + mt6360_ldo7: ldo7 { > > + regulator-compatible = "LDO7"; > > + regulator-name = "mt6360,ldo7"; > > + regulator-min-microvolt = <500000>; > > + regulator-max-microvolt = <2100000>; > > + regulator-allowed-modes = <MT6360_OPMODE_NORMAL > > + MT6360_OPMODE_LP>; > > + regulator-always-on; > > + }; > > + }; > > + }; > > +}; > > + > > +&spi2 { > > + pinctrl-0 = <&spi2_pins>; > > + pinctrl-names = "default"; > > + mediatek,pad-select = <0>; > > + status = "okay"; > > What is attached here? Empty SPI? The SPI lines goes to a connector. Given that it is not really usable as-is without either a specific device node or a spidev node, I will just remove it. > > > > +}; > > + > > +&mt6359_vgpu11_buck_reg { > > + regulator-always-on; > > +}; > > + > > +&mt6359_vsram_others_ldo_reg { > > + regulator-always-on; > > +}; > > + > > +&mt6359_vpu_buck_reg { > > + regulator-always-on; > > +}; > > + > > +&mt6359_vcore_buck_reg { > > + regulator-always-on; > > +}; > > + > > +&mt6359_vproc1_buck_reg { > > + regulator-always-on; > > +}; > > + > > +&mt6359_vproc2_buck_reg { > > + regulator-always-on; > > +}; > > + > > +&mt6359_vsram_md_ldo_reg { > > + regulator-always-on; > > +}; > > + > > +&mt6359_vbbck_ldo_reg { > > + regulator-always-on; > > +}; > > + > > +&mt6359_vrf12_ldo_reg { > > + regulator-always-on; > > +}; > > + > > +&mmc1 { > > Any reasons to have all overrides/labels ordered randomly? I am not > dreaming about alphabetical order, but at least some logical, so mmc1 > next to mmc0... > > > + pinctrl-names = "default", "state_uhs"; > > + pinctrl-0 = <&mmc1_pins_default>; > > + pinctrl-1 = <&mmc1_pins_uhs>; > > + cd-gpios = <&pio 129 GPIO_ACTIVE_LOW>; > > + bus-width = <4>; > > + max-frequency = <200000000>; > > + cap-sd-highspeed; > > + sd-uhs-sdr50; > > + sd-uhs-sdr104; > > + vmmc-supply = <&mt6360_ldo5>; > > + vqmmc-supply = <&mt6360_ldo3>; > > + status = "okay"; > > +}; > > + > > +&xhci0 { > > + vusb33-supply = <&mt6359_vusb_ldo_reg>; > > + vbus-supply = <&otg_vbus_regulator>; > > + status = "okay"; > > +}; > > + > > +&xhci1 { > > + vusb33-supply = <&mt6359_vusb_ldo_reg>; > > + status = "okay"; > > +}; > > + > > +&xhci2 { > > + vusb33-supply = <&mt6359_vusb_ldo_reg>; > > + status = "okay"; > > +}; > > + > > +&xhci3 { > > + vusb33-supply = <&mt6359_vusb_ldo_reg>; > > + status = "okay"; > > +}; > > + > > +&u3phy0 { > > + status = "okay"; > > +}; > > + > > +&u3phy1 { > > + status = "okay"; > > +}; > > + > > +&u3phy2 { > > + status = "okay"; > > +}; > > + > > +&u3phy3 { > > + status = "okay"; > > +}; > > + > > +&pio { > > + mmc0_pins_default: mmc0default { > > + pins_cmd_dat { > > No underscores in node names. Hyphens are accepted. > > Same in all other cases below. > > > + pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>, > > + <PINMUX_GPIO125__FUNC_MSDC0_DAT1>, > > + <PINMUX_GPIO124__FUNC_MSDC0_DAT2>, > > + <PINMUX_GPIO123__FUNC_MSDC0_DAT3>, > > + <PINMUX_GPIO119__FUNC_MSDC0_DAT4>, > > + <PINMUX_GPIO118__FUNC_MSDC0_DAT5>, > > + <PINMUX_GPIO117__FUNC_MSDC0_DAT6>, > > + <PINMUX_GPIO116__FUNC_MSDC0_DAT7>, > > + <PINMUX_GPIO121__FUNC_MSDC0_CMD>; > > + input-enable; > > + drive-strength = <MTK_DRIVE_6mA>; > > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > > + }; > > + > > + pins_clk { > > + pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>; > > + drive-strength = <MTK_DRIVE_6mA>; > > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > > + }; > > + > > + pins_rst { > > + pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>; > > + drive-strength = <MTK_DRIVE_6mA>; > > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > > + }; > > + }; > > + > > + mmc0_pins_uhs: mmc0uhs{ > > + pins_cmd_dat { > > + pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>, > > + <PINMUX_GPIO125__FUNC_MSDC0_DAT1>, > > + <PINMUX_GPIO124__FUNC_MSDC0_DAT2>, > > + <PINMUX_GPIO123__FUNC_MSDC0_DAT3>, > > + <PINMUX_GPIO119__FUNC_MSDC0_DAT4>, > > + <PINMUX_GPIO118__FUNC_MSDC0_DAT5>, > > + <PINMUX_GPIO117__FUNC_MSDC0_DAT6>, > > + <PINMUX_GPIO116__FUNC_MSDC0_DAT7>, > > + <PINMUX_GPIO121__FUNC_MSDC0_CMD>; > > + input-enable; > > + drive-strength = <MTK_DRIVE_8mA>; > > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > > + }; > > + > > + pins_clk { > > + pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>; > > + drive-strength = <MTK_DRIVE_8mA>; > > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > > + }; > > + > > + pins_ds { > > + pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>; > > + drive-strength = <MTK_DRIVE_8mA>; > > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > > + }; > > + > > + pins_rst { > > + pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>; > > + drive-strength = <MTK_DRIVE_8mA>; > > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > > + }; > > + }; > > + > > + mmc1_pins_default: mmc1-pins-default { > > + pins_cmd_dat { > > + pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>, > > + <PINMUX_GPIO112__FUNC_MSDC1_DAT0>, > > + <PINMUX_GPIO113__FUNC_MSDC1_DAT1>, > > + <PINMUX_GPIO114__FUNC_MSDC1_DAT2>, > > + <PINMUX_GPIO115__FUNC_MSDC1_DAT3>; > > + input-enable; > > + drive-strength = <MTK_DRIVE_8mA>; > > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > > + }; > > + > > + pins_clk { > > + pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>; > > + drive-strength = <MTK_DRIVE_8mA>; > > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > > + }; > > + > > + pins_insert { > > + pinmux = <PINMUX_GPIO129__FUNC_GPIO129>; > > + bias-pull-up; > > + }; > > + }; > > + > > + mmc1_pins_uhs: mmc1-pins-uhs { > > Any reason keeping it inconsistent with mmc0 about naming? I mean... why > having one naming pattern for mmc0 and entirely different for mmc1? Why > i2c ends with "-pins" suffix and these do not? > > > + pins_cmd_dat { > > + pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>, > > + <PINMUX_GPIO112__FUNC_MSDC1_DAT0>, > > + <PINMUX_GPIO113__FUNC_MSDC1_DAT1>, > > + <PINMUX_GPIO114__FUNC_MSDC1_DAT2>, > > + <PINMUX_GPIO115__FUNC_MSDC1_DAT3>; > > + input-enable; > > + drive-strength = <MTK_DRIVE_8mA>; > > + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; > > + }; > > + > > + pins_clk { > > + pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>; > > + drive-strength = <MTK_DRIVE_8mA>; > > + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; > > + }; > > + }; > > + > > + i2c0_pins: i2c0-pins { > > + pins { > > + pinmux = <PINMUX_GPIO8__FUNC_SDA0>, > > + <PINMUX_GPIO9__FUNC_SCL0>; > > + bias-pull-up; > > + mediatek,rsel = <MTK_PULL_SET_RSEL_111>; > > + mediatek,drive-strength-adv = <7>; > > + }; > > + }; > > + > > + i2c1_pins: i2c1-pins { > > + pins { > > + pinmux = <PINMUX_GPIO10__FUNC_SDA1>, > > + <PINMUX_GPIO11__FUNC_SCL1>; > > + bias-pull-up; > > + mediatek,rsel = <MTK_PULL_SET_RSEL_111>; > > + mediatek,drive-strength-adv = <7>; > > + }; > > + }; > > + > > + i2c2_pins: i2c2-pins { > > + pins { > > + pinmux = <PINMUX_GPIO12__FUNC_SDA2>, > > + <PINMUX_GPIO13__FUNC_SCL2>; > > + bias-pull-up; > > + mediatek,rsel = <MTK_PULL_SET_RSEL_111>; > > + mediatek,drive-strength-adv = <7>; > > + }; > > + }; > > + > > + i2c6_pins: i2c6-pin { > > + pins { > > + pinmux = <PINMUX_GPIO25__FUNC_SDA6>, > > + <PINMUX_GPIO26__FUNC_SCL6>; > > + bias-pull-up; > > + mediatek,rsel = <MTK_PULL_SET_RSEL_111>; > > + }; > > + }; > > + > > + spi2_pins: spi-pins { > > + pins { > > + pinmux = <PINMUX_GPIO140__FUNC_SPIM2_CSB>, > > + <PINMUX_GPIO141__FUNC_SPIM2_CLK>, > > + <PINMUX_GPIO142__FUNC_SPIM2_MO>, > > + <PINMUX_GPIO143__FUNC_SPIM2_MI>; > > + bias-disable; > > + }; > > + }; > > + > > + pcie0_pins_default: pcie0default { > > + pins { > > + pinmux = <PINMUX_GPIO19__FUNC_WAKEN>, > > + <PINMUX_GPIO20__FUNC_PERSTN>, > > + <PINMUX_GPIO21__FUNC_CLKREQN>; > > + bias-pull-up; > > + }; > > + }; > > + > > + pcie1_pins_default: pcie1default { > > No pins suffix? One more pattern of naming... > > > + pins { > > + pinmux = <PINMUX_GPIO22__FUNC_PERSTN_1>, > > + <PINMUX_GPIO23__FUNC_CLKREQN_1>, > > + <PINMUX_GPIO24__FUNC_WAKEN_1>; > > + bias-pull-up; > > + }; > > + > > + mt7921 { > > + pinmux = <PINMUX_GPIO65__FUNC_GPIO65>, > > + <PINMUX_GPIO67__FUNC_GPIO67>; > > + output-high; > > + }; > > + }; > > + > > + gpio_keys: gpio-keys { > > gpio-keys-pins > > > + pins { > > + pinmux = <PINMUX_GPIO106__FUNC_GPIO106>; > > + input-enable; > > + }; > > + }; > > + > > Best regards, > Krzysztof Thanks for the review. All these remarks will be fixed in v2. Fabien
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile index 5da29e7223e4..c7d4636a2cb7 100644 --- a/arch/arm64/boot/dts/mediatek/Makefile +++ b/arch/arm64/boot/dts/mediatek/Makefile @@ -38,5 +38,6 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb diff --git a/arch/arm64/boot/dts/mediatek/mt8195-demo.dts b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts new file mode 100644 index 000000000000..f486cdf7e22b --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8195-demo.dts @@ -0,0 +1,539 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2022 BayLibre, SAS. + * Author: Fabien Parent <fparent@baylibre.com> + */ +/dts-v1/; + +#include "mt8195.dtsi" +#include "mt6359.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/mt8195-pinfunc.h> +#include <dt-bindings/regulator/mediatek,mt6360-regulator.h> + +/ { + model = "MediaTek MT8195 demo board"; + compatible = "mediatek,mt8195-demo", "mediatek,mt8195"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:921600n8"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* 12 MiB reserved for OP-TEE (BL32) + * +-----------------------+ 0x43e0_0000 + * | SHMEM 2MiB | + * +-----------------------+ 0x43c0_0000 + * | | TA_RAM 8MiB | + * + TZDRAM +--------------+ 0x4340_0000 + * | | TEE_RAM 2MiB | + * +-----------------------+ 0x4320_0000 + */ + optee_reserved: optee@43200000 { + no-map; + reg = <0 0x43200000 0 0x00c00000>; + }; + + /* 192 KiB reserved for ARM Trusted Firmware (BL31) */ + bl31_secmon_reserved: secmon@54600000 { + no-map; + reg = <0 0x54600000 0x0 0x30000>; + }; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + input-name = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys>; + + volume-up { + gpios = <&pio 106 GPIO_ACTIVE_LOW>; + label = "volume_up"; + linux,code = <KEY_VOLUMEUP>; + wakeup-source; + debounce-interval = <15>; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&mmc0 { + status = "okay"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; + bus-width = <8>; + max-frequency = <200000000>; + cap-mmc-highspeed; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + cap-mmc-hw-reset; + no-sdio; + no-sd; + hs400-ds-delay = <0x14c11>; + vmmc-supply = <&mt6359_vemc_1_ldo_reg>; + vqmmc-supply = <&mt6359_vufs_ldo_reg>; + non-removable; +}; + +&pmic { + interrupt-parent = <&pio>; + interrupts = <222 IRQ_TYPE_LEVEL_HIGH>; +}; + +&i2c0 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2c6 { + clock-frequency = <400000>; + pinctrl-0 = <&i2c6_pins>; + pinctrl-names = "default"; + status = "okay"; + + mt6360: mt6360@34 { + compatible = "mediatek,mt6360"; + reg = <0x34>; + interrupt-controller; + interrupt-parent = <&pio>; + interrupts = <101 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "IRQB"; + + charger { + compatible = "mediatek,mt6360-chg"; + richtek,vinovp-microvolt = <14500000>; + + otg_vbus_regulator: usb-otg-vbus-regulator { + regulator-compatible = "usb-otg-vbus"; + regulator-name = "usb-otg-vbus"; + regulator-min-microvolt = <4425000>; + regulator-max-microvolt = <5825000>; + }; + }; + + regulator { + compatible = "mediatek,mt6360-regulator"; + LDO_VIN3-supply = <&mt6360_buck2>; + + mt6360_buck1: buck1 { + regulator-compatible = "BUCK1"; + regulator-name = "mt6360,buck1"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP + MT6360_OPMODE_ULP>; + regulator-always-on; + }; + + mt6360_buck2: buck2 { + regulator-compatible = "BUCK2"; + regulator-name = "mt6360,buck2"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1300000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP + MT6360_OPMODE_ULP>; + regulator-always-on; + }; + + mt6360_ldo1: ldo1 { + regulator-compatible = "LDO1"; + regulator-name = "mt6360,ldo1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + + mt6360_ldo2: ldo2 { + regulator-compatible = "LDO2"; + regulator-name = "mt6360,ldo2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + + mt6360_ldo3: ldo3 { + regulator-compatible = "LDO3"; + regulator-name = "mt6360,ldo3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + + mt6360_ldo5: ldo5 { + regulator-compatible = "LDO5"; + regulator-name = "mt6360,ldo5"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3600000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + + mt6360_ldo6: ldo6 { + regulator-compatible = "LDO6"; + regulator-name = "mt6360,ldo6"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + }; + + mt6360_ldo7: ldo7 { + regulator-compatible = "LDO7"; + regulator-name = "mt6360,ldo7"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <2100000>; + regulator-allowed-modes = <MT6360_OPMODE_NORMAL + MT6360_OPMODE_LP>; + regulator-always-on; + }; + }; + }; +}; + +&spi2 { + pinctrl-0 = <&spi2_pins>; + pinctrl-names = "default"; + mediatek,pad-select = <0>; + status = "okay"; +}; + +&mt6359_vgpu11_buck_reg { + regulator-always-on; +}; + +&mt6359_vsram_others_ldo_reg { + regulator-always-on; +}; + +&mt6359_vpu_buck_reg { + regulator-always-on; +}; + +&mt6359_vcore_buck_reg { + regulator-always-on; +}; + +&mt6359_vproc1_buck_reg { + regulator-always-on; +}; + +&mt6359_vproc2_buck_reg { + regulator-always-on; +}; + +&mt6359_vsram_md_ldo_reg { + regulator-always-on; +}; + +&mt6359_vbbck_ldo_reg { + regulator-always-on; +}; + +&mt6359_vrf12_ldo_reg { + regulator-always-on; +}; + +&mmc1 { + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc1_pins_default>; + pinctrl-1 = <&mmc1_pins_uhs>; + cd-gpios = <&pio 129 GPIO_ACTIVE_LOW>; + bus-width = <4>; + max-frequency = <200000000>; + cap-sd-highspeed; + sd-uhs-sdr50; + sd-uhs-sdr104; + vmmc-supply = <&mt6360_ldo5>; + vqmmc-supply = <&mt6360_ldo3>; + status = "okay"; +}; + +&xhci0 { + vusb33-supply = <&mt6359_vusb_ldo_reg>; + vbus-supply = <&otg_vbus_regulator>; + status = "okay"; +}; + +&xhci1 { + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + +&xhci2 { + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + +&xhci3 { + vusb33-supply = <&mt6359_vusb_ldo_reg>; + status = "okay"; +}; + +&u3phy0 { + status = "okay"; +}; + +&u3phy1 { + status = "okay"; +}; + +&u3phy2 { + status = "okay"; +}; + +&u3phy3 { + status = "okay"; +}; + +&pio { + mmc0_pins_default: mmc0default { + pins_cmd_dat { + pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO125__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO124__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO123__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO119__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO118__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO117__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO116__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO121__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins_clk { + pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins_rst { + pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>; + drive-strength = <MTK_DRIVE_6mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc0_pins_uhs: mmc0uhs{ + pins_cmd_dat { + pinmux = <PINMUX_GPIO126__FUNC_MSDC0_DAT0>, + <PINMUX_GPIO125__FUNC_MSDC0_DAT1>, + <PINMUX_GPIO124__FUNC_MSDC0_DAT2>, + <PINMUX_GPIO123__FUNC_MSDC0_DAT3>, + <PINMUX_GPIO119__FUNC_MSDC0_DAT4>, + <PINMUX_GPIO118__FUNC_MSDC0_DAT5>, + <PINMUX_GPIO117__FUNC_MSDC0_DAT6>, + <PINMUX_GPIO116__FUNC_MSDC0_DAT7>, + <PINMUX_GPIO121__FUNC_MSDC0_CMD>; + input-enable; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins_clk { + pinmux = <PINMUX_GPIO122__FUNC_MSDC0_CLK>; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins_ds { + pinmux = <PINMUX_GPIO127__FUNC_MSDC0_DSL>; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins_rst { + pinmux = <PINMUX_GPIO120__FUNC_MSDC0_RSTB>; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + }; + + mmc1_pins_default: mmc1-pins-default { + pins_cmd_dat { + pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>, + <PINMUX_GPIO112__FUNC_MSDC1_DAT0>, + <PINMUX_GPIO113__FUNC_MSDC1_DAT1>, + <PINMUX_GPIO114__FUNC_MSDC1_DAT2>, + <PINMUX_GPIO115__FUNC_MSDC1_DAT3>; + input-enable; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins_clk { + pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + + pins_insert { + pinmux = <PINMUX_GPIO129__FUNC_GPIO129>; + bias-pull-up; + }; + }; + + mmc1_pins_uhs: mmc1-pins-uhs { + pins_cmd_dat { + pinmux = <PINMUX_GPIO110__FUNC_MSDC1_CMD>, + <PINMUX_GPIO112__FUNC_MSDC1_DAT0>, + <PINMUX_GPIO113__FUNC_MSDC1_DAT1>, + <PINMUX_GPIO114__FUNC_MSDC1_DAT2>, + <PINMUX_GPIO115__FUNC_MSDC1_DAT3>; + input-enable; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-up = <MTK_PUPD_SET_R1R0_01>; + }; + + pins_clk { + pinmux = <PINMUX_GPIO111__FUNC_MSDC1_CLK>; + drive-strength = <MTK_DRIVE_8mA>; + bias-pull-down = <MTK_PUPD_SET_R1R0_10>; + }; + }; + + i2c0_pins: i2c0-pins { + pins { + pinmux = <PINMUX_GPIO8__FUNC_SDA0>, + <PINMUX_GPIO9__FUNC_SCL0>; + bias-pull-up; + mediatek,rsel = <MTK_PULL_SET_RSEL_111>; + mediatek,drive-strength-adv = <7>; + }; + }; + + i2c1_pins: i2c1-pins { + pins { + pinmux = <PINMUX_GPIO10__FUNC_SDA1>, + <PINMUX_GPIO11__FUNC_SCL1>; + bias-pull-up; + mediatek,rsel = <MTK_PULL_SET_RSEL_111>; + mediatek,drive-strength-adv = <7>; + }; + }; + + i2c2_pins: i2c2-pins { + pins { + pinmux = <PINMUX_GPIO12__FUNC_SDA2>, + <PINMUX_GPIO13__FUNC_SCL2>; + bias-pull-up; + mediatek,rsel = <MTK_PULL_SET_RSEL_111>; + mediatek,drive-strength-adv = <7>; + }; + }; + + i2c6_pins: i2c6-pin { + pins { + pinmux = <PINMUX_GPIO25__FUNC_SDA6>, + <PINMUX_GPIO26__FUNC_SCL6>; + bias-pull-up; + mediatek,rsel = <MTK_PULL_SET_RSEL_111>; + }; + }; + + spi2_pins: spi-pins { + pins { + pinmux = <PINMUX_GPIO140__FUNC_SPIM2_CSB>, + <PINMUX_GPIO141__FUNC_SPIM2_CLK>, + <PINMUX_GPIO142__FUNC_SPIM2_MO>, + <PINMUX_GPIO143__FUNC_SPIM2_MI>; + bias-disable; + }; + }; + + pcie0_pins_default: pcie0default { + pins { + pinmux = <PINMUX_GPIO19__FUNC_WAKEN>, + <PINMUX_GPIO20__FUNC_PERSTN>, + <PINMUX_GPIO21__FUNC_CLKREQN>; + bias-pull-up; + }; + }; + + pcie1_pins_default: pcie1default { + pins { + pinmux = <PINMUX_GPIO22__FUNC_PERSTN_1>, + <PINMUX_GPIO23__FUNC_CLKREQN_1>, + <PINMUX_GPIO24__FUNC_WAKEN_1>; + bias-pull-up; + }; + + mt7921 { + pinmux = <PINMUX_GPIO65__FUNC_GPIO65>, + <PINMUX_GPIO67__FUNC_GPIO67>; + output-high; + }; + }; + + gpio_keys: gpio-keys { + pins { + pinmux = <PINMUX_GPIO106__FUNC_GPIO106>; + input-enable; + }; + }; + + uart0_pins: uart0-pins { + pins { + pinmux = <PINMUX_GPIO98__FUNC_UTXD0>, + <PINMUX_GPIO99__FUNC_URXD0>; + }; + }; + + uart1_pins: uart1-pins { + pins { + pinmux = <PINMUX_GPIO102__FUNC_UTXD1>, + <PINMUX_GPIO103__FUNC_URXD1>; + }; + }; +};
Add basic device-tree for the MT8195 Demo board. The Demo board is made by MediaTek and has a MT8195 SoC, associated with the MT6359 and MT6360 PMICs, and the MT7921 connectivity chip. The IOs available on that board are: * 1 USB Type-C connector with DP aux mode support * 1 USB Type-A connector * 1 full size HDMI RX and 1 full size HDMI TX connector * 1 uSD slot * 40 pins header * SPI interface header * 1 M.2 slot * 1 audio jack * 1 micro-USB port for serial debug * 2 connectors for DSI displays * 3 connectors for CSI cameras * 1 connector for a eDP panel * 1 MMC storage This commit adds basic support in order to be able to boot. Signed-off-by: Fabien Parent <fparent@baylibre.com> --- This patch depends on the following patches: [0] https://patchwork.kernel.org/project/linux-mediatek/patch/1622011927-359-9-git-send-email-hsin-hsiung.wang@mediatek.com/ [1] https://patchwork.kernel.org/project/linux-mediatek/patch/20220216113131.13145-4-tinghan.shen@mediatek.com/ arch/arm64/boot/dts/mediatek/Makefile | 1 + arch/arm64/boot/dts/mediatek/mt8195-demo.dts | 539 +++++++++++++++++++ 2 files changed, 540 insertions(+) create mode 100644 arch/arm64/boot/dts/mediatek/mt8195-demo.dts