@@ -18,12 +18,6 @@
#include <dt-bindings/clock/mt8183-clk.h>
-/* Infra global controller reset set register */
-#define INFRA_RST0_SET_OFFSET 0x120
-#define INFRA_RST1_SET_OFFSET 0x130
-#define INFRA_RST2_SET_OFFSET 0x140
-#define INFRA_RST3_SET_OFFSET 0x150
-
static DEFINE_SPINLOCK(mt8183_clk_lock);
static const struct mtk_fixed_clk top_fixed_clks[] = {
@@ -1114,6 +1114,20 @@ static const struct mtk_gate top_clks[] = {
GATE_TOP(CLK_TOP_SSUSB_PHY_REF, "ssusb_phy_ref", "clk26m", 25),
};
+static u16 infra_ao_rst_ofs[] = {
+ INFRA_RST0_SET_OFFSET,
+ INFRA_RST1_SET_OFFSET,
+ INFRA_RST2_SET_OFFSET,
+ INFRA_RST3_SET_OFFSET,
+ INFRA_RST4_SET_OFFSET,
+};
+
+static const struct mtk_clk_rst_desc clk_rst_desc = {
+ .version = MTK_RST_SET_CLR,
+ .rst_bank_ofs = infra_ao_rst_ofs,
+ .rst_bank_nr = ARRAY_SIZE(infra_ao_rst_ofs),
+};
+
#define MT8192_PLL_FMAX (3800UL * MHZ)
#define MT8192_PLL_FMIN (1500UL * MHZ)
#define MT8192_INTEGER_BITS 8
@@ -1239,6 +1253,10 @@ static int clk_mt8192_infra_probe(struct platform_device *pdev)
if (r)
goto free_clk_data;
+ r = mtk_register_reset_controller_with_dev(&pdev->dev, &clk_rst_desc);
+ if (r)
+ goto free_clk_data;
+
r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
if (r)
goto free_clk_data;
@@ -182,9 +182,24 @@ static const struct mtk_gate infra_ao_clks[] = {
GATE_INFRA_AO4(CLK_INFRA_AO_PERI_UFS_MEM_SUB, "infra_ao_peri_ufs_mem_sub", "mem_466m", 31),
};
+static u16 infra_ao_rst_ofs[] = {
+ INFRA_RST0_SET_OFFSET,
+ INFRA_RST1_SET_OFFSET,
+ INFRA_RST2_SET_OFFSET,
+ INFRA_RST3_SET_OFFSET,
+ INFRA_RST4_SET_OFFSET,
+};
+
+static struct mtk_clk_rst_desc infra_ao_rst_desc = {
+ .version = MTK_RST_SET_CLR,
+ .rst_bank_ofs = infra_ao_rst_ofs,
+ .rst_bank_nr = ARRAY_SIZE(infra_ao_rst_ofs),
+};
+
static const struct mtk_clk_desc infra_ao_desc = {
.clks = infra_ao_clks,
.num_clks = ARRAY_SIZE(infra_ao_clks),
+ .rst_desc = &infra_ao_rst_desc,
};
static const struct of_device_id of_match_clk_mt8195_infra_ao[] = {
@@ -11,6 +11,13 @@
#define RST_NR_PER_BANK 32
+/* Infra global controller reset set register */
+#define INFRA_RST0_SET_OFFSET 0x120
+#define INFRA_RST1_SET_OFFSET 0x130
+#define INFRA_RST2_SET_OFFSET 0x140
+#define INFRA_RST3_SET_OFFSET 0x150
+#define INFRA_RST4_SET_OFFSET 0x730
+
/**
* enum mtk_reset_version - Version of MediaTek clock reset controller.
* @MTK_RST_SIMPLE: Use the same registers for bit set and clear.
The infra_ao reset is needed for MT8192 and MT8195. - Add mtk_clk_rst_desc for MT8192 and MT8195. - Add register reset controller function for MT8192 infra_ao. - Move definition of infra reset from cl-mt8183.c to reset.h because it's the same definition with MT8192 and MT8195. - Add new definition of infra reset_4 for MT8192 and MT8195. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> --- drivers/clk/mediatek/clk-mt8183.c | 6 ------ drivers/clk/mediatek/clk-mt8192.c | 18 ++++++++++++++++++ drivers/clk/mediatek/clk-mt8195-infra_ao.c | 15 +++++++++++++++ drivers/clk/mediatek/reset.h | 7 +++++++ 4 files changed, 40 insertions(+), 6 deletions(-)