diff mbox series

[v7,12/36] iommu/mediatek: Add a flag STD_AXI_MODE

Message ID 20220503071427.2285-13-yong.wu@mediatek.com (mailing list archive)
State New, archived
Headers show
Series MT8195 and MT8186 IOMMU SUPPORT | expand

Commit Message

Yong Wu (吴勇) May 3, 2022, 7:14 a.m. UTC 
Add a new flag STD_AXI_MODE which is prepared for infra and apu iommu
which use the standard axi mode. All the current SoC don't use this flag.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/iommu/mtk_iommu.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 92f172a772d1..22e2b104e3ee 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -122,6 +122,7 @@ 
 #define IOVA_34_EN			BIT(8)
 #define SHARE_PGTABLE			BIT(9) /* 2 HW share pgtable */
 #define DCM_DISABLE			BIT(10)
+#define STD_AXI_MODE			BIT(11) /* For non MM iommu */
 
 #define MTK_IOMMU_HAS_FLAG(pdata, _x) \
 		((((pdata)->flags) & (_x)) == (_x))
@@ -785,7 +786,8 @@  static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
 		regval = 0;
 	} else {
 		regval = readl_relaxed(data->base + REG_MMU_MISC_CTRL);
-		regval &= ~F_MMU_STANDARD_AXI_MODE_MASK;
+		if (!MTK_IOMMU_HAS_FLAG(data->plat_data, STD_AXI_MODE))
+			regval &= ~F_MMU_STANDARD_AXI_MODE_MASK;
 		if (MTK_IOMMU_HAS_FLAG(data->plat_data, OUT_ORDER_WR_EN))
 			regval &= ~F_MMU_IN_ORDER_WR_EN_MASK;
 	}