diff mbox series

[v2,1/2] dt-bindings: pinctrl: Add MediaTek MT6795 pinctrl bindings

Message ID 20220503142537.152499-2-angelogioacchino.delregno@collabora.com (mailing list archive)
State New, archived
Headers show
Series MediaTek Helio X10 MT6795 - Pinctrl driver | expand

Commit Message

AngeloGioacchino Del Regno May 3, 2022, 2:25 p.m. UTC
Add devicetree and pinfunc bindings for MediaTek Helio X10 MT6795.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 .../pinctrl/mediatek,pinctrl-mt6795.yaml      | 224 +++++
 include/dt-bindings/pinctrl/mt6795-pinfunc.h  | 908 ++++++++++++++++++
 2 files changed, 1132 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml
 create mode 100644 include/dt-bindings/pinctrl/mt6795-pinfunc.h

Comments

Rob Herring May 3, 2022, 10:21 p.m. UTC | #1
On Tue, 03 May 2022 16:25:36 +0200, AngeloGioacchino Del Regno wrote:
> Add devicetree and pinfunc bindings for MediaTek Helio X10 MT6795.
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> ---
>  .../pinctrl/mediatek,pinctrl-mt6795.yaml      | 224 +++++
>  include/dt-bindings/pinctrl/mt6795-pinfunc.h  | 908 ++++++++++++++++++
>  2 files changed, 1132 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml
>  create mode 100644 include/dt-bindings/pinctrl/mt6795-pinfunc.h
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
./Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml: $id: relative path/filename doesn't match actual path or filename
	expected: http://devicetree.org/schemas/pinctrl/mediatek,pinctrl-mt6795.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
Nícolas F. R. A. Prado May 4, 2022, 12:33 a.m. UTC | #2
Hi Angelo,

On Tue, May 03, 2022 at 04:25:36PM +0200, AngeloGioacchino Del Regno wrote:
> Add devicetree and pinfunc bindings for MediaTek Helio X10 MT6795.
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> ---
>  .../pinctrl/mediatek,pinctrl-mt6795.yaml      | 224 +++++
>  include/dt-bindings/pinctrl/mt6795-pinfunc.h  | 908 ++++++++++++++++++
>  2 files changed, 1132 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml
>  create mode 100644 include/dt-bindings/pinctrl/mt6795-pinfunc.h
> 

...

> +
> +          bias-pull-down:
> +            oneOf:
> +              - type: boolean
> +              - enum: [100, 101, 102, 103]
> +                description: mt6795 pull down PUPD/R0/R1 type define value.
> +            description: |
> +               For normal pull down type, it is not necessary to specify R1R0
> +               values; When pull down type is PUPD/R0/R1, adding R1R0 defines
> +               will set different resistance values.
> +
> +          bias-pull-up:
> +            oneOf:
> +              - type: boolean
> +              - enum: [100, 101, 102, 103]
> +                description: mt6795 pull up PUPD/R0/R1 type define value.
> +            description: |
> +               For normal pull up type, it is not necessary to specify R1R0
> +               values; When pull up type is PUPD/R0/R1, adding R1R0 defines
> +               will set different resistance values.
> +
> +          bias-disable: true
> +
> +          output-high: true
> +
> +          output-low: true
> +
> +          input-enable: true
> +
> +          input-disable: true
> +
> +          input-schmitt-enable: true
> +
> +          input-schmitt-disable: true
> +
> +          mediatek,pull-up-adv:
> +            description: |
> +              Pull up setings for 2 pull resistors, R0 and R1. User can
> +              configure those special pins. Valid arguments are described as below:
> +              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
> +              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
> +              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
> +              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
> +            $ref: /schemas/types.yaml#/definitions/uint32
> +            enum: [0, 1, 2, 3]
> +
> +          mediatek,pull-down-adv:
> +            description: |
> +              Pull down settings for 2 pull resistors, R0 and R1. User can
> +              configure those special pins. Valid arguments are described as below:
> +              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
> +              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
> +              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
> +              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
> +            $ref: /schemas/types.yaml#/definitions/uint32
> +            enum: [0, 1, 2, 3]

I'm actually myself trying to figure out why there are two ways of setting
R0/R1 in the dt-binding (and which should preferred for mt8192 and others):
1. passing 0-3 to mediatek,pull-{up,down}-adv
2. passing one of the MTK_PUPD_SET_R1R0_** flags to bias-pull-{up,down}

When the pin is of type MTK_PULL_PUPD_R1R0_TYPE (which should be the only case
in which it makes sense to consider mediatek,pull-{up,down}-adv AFAIU), they end
up doing the same thing, it's:

mtk_pinconf_bias_set_combo() -> mtk_pinconf_bias_set_pupd_r1_r0()
vs
mtk_pinconf_adv_pull_set()

... and they write to the same registers.

Unless I'm missing something here.

Thanks,
Nícolas
AngeloGioacchino Del Regno May 4, 2022, 9:08 a.m. UTC | #3
Il 04/05/22 02:33, Nícolas F. R. A. Prado ha scritto:
> Hi Angelo,
> 
> On Tue, May 03, 2022 at 04:25:36PM +0200, AngeloGioacchino Del Regno wrote:
>> Add devicetree and pinfunc bindings for MediaTek Helio X10 MT6795.
>>
>> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
>> ---
>>   .../pinctrl/mediatek,pinctrl-mt6795.yaml      | 224 +++++
>>   include/dt-bindings/pinctrl/mt6795-pinfunc.h  | 908 ++++++++++++++++++
>>   2 files changed, 1132 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml
>>   create mode 100644 include/dt-bindings/pinctrl/mt6795-pinfunc.h
>>
> 
> ...
> 
>> +
>> +          bias-pull-down:
>> +            oneOf:
>> +              - type: boolean
>> +              - enum: [100, 101, 102, 103]
>> +                description: mt6795 pull down PUPD/R0/R1 type define value.
>> +            description: |
>> +               For normal pull down type, it is not necessary to specify R1R0
>> +               values; When pull down type is PUPD/R0/R1, adding R1R0 defines
>> +               will set different resistance values.
>> +
>> +          bias-pull-up:
>> +            oneOf:
>> +              - type: boolean
>> +              - enum: [100, 101, 102, 103]
>> +                description: mt6795 pull up PUPD/R0/R1 type define value.
>> +            description: |
>> +               For normal pull up type, it is not necessary to specify R1R0
>> +               values; When pull up type is PUPD/R0/R1, adding R1R0 defines
>> +               will set different resistance values.
>> +
>> +          bias-disable: true
>> +
>> +          output-high: true
>> +
>> +          output-low: true
>> +
>> +          input-enable: true
>> +
>> +          input-disable: true
>> +
>> +          input-schmitt-enable: true
>> +
>> +          input-schmitt-disable: true
>> +
>> +          mediatek,pull-up-adv:
>> +            description: |
>> +              Pull up setings for 2 pull resistors, R0 and R1. User can
>> +              configure those special pins. Valid arguments are described as below:
>> +              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
>> +              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
>> +              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
>> +              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
>> +            $ref: /schemas/types.yaml#/definitions/uint32
>> +            enum: [0, 1, 2, 3]
>> +
>> +          mediatek,pull-down-adv:
>> +            description: |
>> +              Pull down settings for 2 pull resistors, R0 and R1. User can
>> +              configure those special pins. Valid arguments are described as below:
>> +              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
>> +              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
>> +              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
>> +              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
>> +            $ref: /schemas/types.yaml#/definitions/uint32
>> +            enum: [0, 1, 2, 3]
> 
> I'm actually myself trying to figure out why there are two ways of setting
> R0/R1 in the dt-binding (and which should preferred for mt8192 and others):
> 1. passing 0-3 to mediatek,pull-{up,down}-adv
> 2. passing one of the MTK_PUPD_SET_R1R0_** flags to bias-pull-{up,down}
> 
> When the pin is of type MTK_PULL_PUPD_R1R0_TYPE (which should be the only case
> in which it makes sense to consider mediatek,pull-{up,down}-adv AFAIU), they end
> up doing the same thing, it's:
> 
> mtk_pinconf_bias_set_combo() -> mtk_pinconf_bias_set_pupd_r1_r0()
> vs
> mtk_pinconf_adv_pull_set()
> 
> ... and they write to the same registers.
> 
> Unless I'm missing something here.
> 
> Thanks,
> Nícolas

Hey!

Yes you're missing something important :-P

First of all, the flow all depends on the pinctrl driver "type": we have
the common (v1), moore and paris.
I will leave this research to you, or this reply will become a wall of text,
so let's go on with the latter details, which are relative to the paris one.

You should check pinctrl/mediatek/pinctrl-mt(model).c: here, you declare a
struct mtk_pin_soc containing pointers to pins data and function callbacks,
such as bias_{get,set}_combo() and adv_pull_{set,get}().


Now to the real deal, examples below:

- Declaring property "mediatek,pull-up-adv" means that you get through
   MTK_PIN_CONFIG_PU_ADV case, which calls the adv_pull_set() callback;
- Declaring property "bias-pull-up", however, means that you get through
   PIN_CONFIG_BIAS_PULL_UP, which calls bias_set_combo().

For adv_pull_set() callback being mtk_pinconf_adv_pull_set() the following happens:
- Write to registers PIN_REG_R0, PIN_REG_R1 (set resistor 0,1 en/disabled);
- Write to registers PIN_REG_PUPD (pull up, or down)
- If below writes fail (because no r0r1/pupd declared in your driver's table),
   the code will call the bias_set() callback as a fallback.

For bias_set_combo() cb being mtk_pinconf_bias_set_combo() the following happens:
- Check pull_type mask, it may be one or a combination (OR) of:
   - MTK_PULL_RSEL_TYPE
   - MTK_PULL_PU_PD_TYPE
   - MTK_PULL_PULLSEL_TYPE
   - MTK_PULL_PUPD_R1R0_TYPE
- Call function(s!) mtk_pinconf_bias_set_{rsel,pu_pd,pullsel_pullen,pupd_r1_r0},
   depending on the bits set in the pull_type mask.

All of the aforementioned functions will perform a different register write for
different pullup/pulldown settings..

bias-pull-up:
One of the cases in which you want to use the combo is when you need to set a
combination of, let's say, PULLSEL and R1R0 (enabling a default pull, adding a
series resistance of parallel R1R0 resistors to the default value), which is
similar to RSEL_TYPE, but for SoCs that don't have the RSEL_TYPE register layout.

mediatek,pull-up-adv:
One of the cases in which you want to use the adv_pull_set is when you want to
set *only* R1R0+PUPD or *only* PULLSEL (when r1r0/pupd not supported), but also
*never* modify PU_PD or RSEL registers.


It's a bit tricky to understand, but this stuff is really on a per-SoC basis, as
not all of them will behave like the other... so if you check only pinctrl-paris,
or only pinctrl-mtk-common-v2, you will inevitably go offroad with your research.
The MediaTek pinctrl mutates behavior in a combination of the aforementioned two
*and* the SoC-specific pinctrl data (pinctrl-mt6795.c).

Though, maybe-and-I-say-maybe (because I haven't performed a *full* research on
that topic), it *may be* possible to refactor the mtk pinctrl framework to get
rid of the mediatek,pull-up-adv property and do it all from the standard pinconf
bias-pull-up property instead with some driver magic... but.. in any case, that's
for another time - definitely not now (for me, at least - but if anyone wants to
explore this territory and produce more cleanups, you're encouraged to).


Please note that I tried to simplify the explanation as much as possible and
something inside may have to be "interpreted the right way", when looking for
details that are way more advanced compared to the basics that are explained
here... but you see, it's already a big wall of text... :-) :-)

Cheers,
Angelo
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml
new file mode 100644
index 000000000000..d84f6a118f20
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml
@@ -0,0 +1,224 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/pinctrl-mt6795.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT6795 Pin Controller
+
+maintainers:
+  - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+  - Sean Wang <sean.wang@kernel.org>
+
+description: |
+  The Mediatek's Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    const: mediatek,mt6795-pinctrl
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: |
+      Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+      the amount of cells must be specified as 2. See the below
+      mentioned gpio binding representation for description of particular cells.
+    const: 2
+
+  gpio-ranges:
+    description: GPIO valid number range.
+    maxItems: 1
+
+  reg:
+    description:
+      Physical address base for gpio base and eint registers.
+    minItems: 2
+
+  reg-names:
+    items:
+      - const: base
+      - const: eint
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  interrupts:
+    description: The interrupt outputs to sysirq.
+    maxItems: 1
+
+# PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+    patternProperties:
+      '^pins':
+        type: object
+        additionalProperties: false
+        description: |
+          A pinctrl node should contain at least one subnodes representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and
+          input schmitt.
+          An example of using macro:
+          pincontroller {
+            /* GPIO0 set as multifunction GPIO0 */
+            gpio-pins {
+              pins {
+                pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+              }
+            };
+            /* GPIO45 set as multifunction SDA0 */
+            i2c0-pins {
+              pins {
+                pinmux = <PINMUX_GPIO45__FUNC_SDA0>;
+              }
+            };
+          };
+        $ref: "pinmux-node.yaml"
+
+        properties:
+          pinmux:
+            description: |
+              Integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h
+              directly.
+
+          drive-strength:
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+          bias-pull-down:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt6795 pull down PUPD/R0/R1 type define value.
+            description: |
+               For normal pull down type, it is not necessary to specify R1R0
+               values; When pull down type is PUPD/R0/R1, adding R1R0 defines
+               will set different resistance values.
+
+          bias-pull-up:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt6795 pull up PUPD/R0/R1 type define value.
+            description: |
+               For normal pull up type, it is not necessary to specify R1R0
+               values; When pull up type is PUPD/R0/R1, adding R1R0 defines
+               will set different resistance values.
+
+          bias-disable: true
+
+          output-high: true
+
+          output-low: true
+
+          input-enable: true
+
+          input-disable: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          mediatek,pull-up-adv:
+            description: |
+              Pull up setings for 2 pull resistors, R0 and R1. User can
+              configure those special pins. Valid arguments are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+          mediatek,pull-down-adv:
+            description: |
+              Pull down settings for 2 pull resistors, R0 and R1. User can
+              configure those special pins. Valid arguments are described as below:
+              0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
+              1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
+              2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
+              3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2, 3]
+
+        required:
+          - pinmux
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/pinctrl/mt6795-pinfunc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pio: pinctrl@10005000 {
+            compatible = "mediatek,mt6795-pinctrl";
+            reg = <0 0x10005000 0 0x1000>, <0 0x1000b000 0 0x1000>;
+            reg-names = "base", "eint";
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-ranges = <&pio 0 0 196>;
+            interrupt-controller;
+            interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+            #interrupt-cells = <2>;
+
+            i2c0-pins {
+                pins-sda-scl {
+                    pinmux = <PINMUX_GPIO45__FUNC_SDA0>,
+                             <PINMUX_GPIO46__FUNC_SCL0>;
+                };
+            };
+
+            mmc0-pins {
+                pins-cmd-dat {
+                    pinmux = <PINMUX_GPIO154__FUNC_MSDC0_DAT0>,
+                             <PINMUX_GPIO155__FUNC_MSDC0_DAT1>,
+                             <PINMUX_GPIO156__FUNC_MSDC0_DAT2>,
+                             <PINMUX_GPIO157__FUNC_MSDC0_DAT3>,
+                             <PINMUX_GPIO158__FUNC_MSDC0_DAT4>,
+                             <PINMUX_GPIO159__FUNC_MSDC0_DAT5>,
+                             <PINMUX_GPIO160__FUNC_MSDC0_DAT6>,
+                             <PINMUX_GPIO161__FUNC_MSDC0_DAT7>,
+                             <PINMUX_GPIO162__FUNC_MSDC0_CMD>;
+                    input-enable;
+                    bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+                };
+
+                pins-clk {
+                    pinmux = <PINMUX_GPIO163__FUNC_MSDC0_CLK>;
+                    bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+                };
+
+                pins-rst {
+                    pinmux = <PINMUX_GPIO165__FUNC_MSDC0_RSTB>;
+                    bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+                };
+            };
+        };
+    };
diff --git a/include/dt-bindings/pinctrl/mt6795-pinfunc.h b/include/dt-bindings/pinctrl/mt6795-pinfunc.h
new file mode 100644
index 000000000000..4888bb7fb9cf
--- /dev/null
+++ b/include/dt-bindings/pinctrl/mt6795-pinfunc.h
@@ -0,0 +1,908 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2022 Collabora Ltd.
+ * Author: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
+ */
+
+#ifndef __DTS_MT8173_PINFUNC_H
+#define __DTS_MT8173_PINFUNC_H
+
+#include <dt-bindings/pinctrl/mt65xx.h>
+
+#define PINMUX_GPIO0__FUNC_GPIO0 (MTK_PIN_NO(0) | 0)
+#define PINMUX_GPIO0__FUNC_IRDA_PDN (MTK_PIN_NO(0) | 1)
+#define PINMUX_GPIO0__FUNC_I2S1_WS (MTK_PIN_NO(0) | 2)
+#define PINMUX_GPIO0__FUNC_TDD_TMS (MTK_PIN_NO(0) | 4)
+#define PINMUX_GPIO0__FUNC_UTXD0 (MTK_PIN_NO(0) | 5)
+
+#define PINMUX_GPIO1__FUNC_GPIO1 (MTK_PIN_NO(1) | 0)
+#define PINMUX_GPIO1__FUNC_IRDA_RXD (MTK_PIN_NO(1) | 1)
+#define PINMUX_GPIO1__FUNC_I2S1_BCK (MTK_PIN_NO(1) | 2)
+#define PINMUX_GPIO1__FUNC_SDA4 (MTK_PIN_NO(1) | 3)
+#define PINMUX_GPIO1__FUNC_TDD_TCK (MTK_PIN_NO(1) | 4)
+#define PINMUX_GPIO1__FUNC_URXD0 (MTK_PIN_NO(1) | 5)
+
+#define PINMUX_GPIO2__FUNC_GPIO2 (MTK_PIN_NO(2) | 0)
+#define PINMUX_GPIO2__FUNC_IRDA_TXD (MTK_PIN_NO(2) | 1)
+#define PINMUX_GPIO2__FUNC_I2S1_MCK (MTK_PIN_NO(2) | 2)
+#define PINMUX_GPIO2__FUNC_SCL4 (MTK_PIN_NO(2) | 3)
+#define PINMUX_GPIO2__FUNC_TDD_TDI (MTK_PIN_NO(2) | 4)
+#define PINMUX_GPIO2__FUNC_UTXD3 (MTK_PIN_NO(2) | 5)
+
+#define PINMUX_GPIO3__FUNC_GPIO3 (MTK_PIN_NO(3) | 0)
+#define PINMUX_GPIO3__FUNC_DSI1_TE (MTK_PIN_NO(3) | 1)
+#define PINMUX_GPIO3__FUNC_I2S1_DO_1 (MTK_PIN_NO(3) | 2)
+#define PINMUX_GPIO3__FUNC_SDA3 (MTK_PIN_NO(3) | 3)
+#define PINMUX_GPIO3__FUNC_TDD_TDO (MTK_PIN_NO(3) | 4)
+#define PINMUX_GPIO3__FUNC_URXD3 (MTK_PIN_NO(3) | 5)
+
+#define PINMUX_GPIO4__FUNC_GPIO4 (MTK_PIN_NO(4) | 0)
+#define PINMUX_GPIO4__FUNC_DISP_PWM1 (MTK_PIN_NO(4) | 1)
+#define PINMUX_GPIO4__FUNC_I2S1_DO_2 (MTK_PIN_NO(4) | 2)
+#define PINMUX_GPIO4__FUNC_SCL3 (MTK_PIN_NO(4) | 3)
+#define PINMUX_GPIO4__FUNC_TDD_TRSTN (MTK_PIN_NO(4) | 4)
+
+#define PINMUX_GPIO5__FUNC_GPIO5 (MTK_PIN_NO(5) | 0)
+#define PINMUX_GPIO5__FUNC_PCM1_CLK (MTK_PIN_NO(5) | 1)
+#define PINMUX_GPIO5__FUNC_I2S2_WS (MTK_PIN_NO(5) | 2)
+#define PINMUX_GPIO5__FUNC_SPI_CK_3 (MTK_PIN_NO(5) | 3)
+#define PINMUX_GPIO5__FUNC_LTE_MD32_JTAG_TMS (MTK_PIN_NO(5) | 4)
+#define PINMUX_GPIO5__FUNC_AP_MD32_JTAG_TMS (MTK_PIN_NO(5) | 5)
+
+#define PINMUX_GPIO6__FUNC_GPIO6 (MTK_PIN_NO(6) | 0)
+#define PINMUX_GPIO6__FUNC_PCM1_SYNC (MTK_PIN_NO(6) | 1)
+#define PINMUX_GPIO6__FUNC_I2S2_BCK (MTK_PIN_NO(6) | 2)
+#define PINMUX_GPIO6__FUNC_SPI_MI_3 (MTK_PIN_NO(6) | 3)
+#define PINMUX_GPIO6__FUNC_LTE_MD32_JTAG_TCK (MTK_PIN_NO(6) | 4)
+#define PINMUX_GPIO6__FUNC_AP_MD32_JTAG_TCK (MTK_PIN_NO(6) | 5)
+
+#define PINMUX_GPIO7__FUNC_GPIO7 (MTK_PIN_NO(7) | 0)
+#define PINMUX_GPIO7__FUNC_PCM1_DI (MTK_PIN_NO(7) | 1)
+#define PINMUX_GPIO7__FUNC_I2S2_DI_1 (MTK_PIN_NO(7) | 2)
+#define PINMUX_GPIO7__FUNC_SPI_MO_3 (MTK_PIN_NO(7) | 3)
+#define PINMUX_GPIO7__FUNC_LTE_MD32_JTAG_TDI (MTK_PIN_NO(7) | 4)
+#define PINMUX_GPIO7__FUNC_AP_MD32_JTAG_TDI (MTK_PIN_NO(7) | 5)
+
+#define PINMUX_GPIO8__FUNC_GPIO8 (MTK_PIN_NO(8) | 0)
+#define PINMUX_GPIO8__FUNC_PCM1_DO (MTK_PIN_NO(8) | 1)
+#define PINMUX_GPIO8__FUNC_I2S2_DI_2 (MTK_PIN_NO(8) | 2)
+#define PINMUX_GPIO8__FUNC_SPI_CS_3 (MTK_PIN_NO(8) | 3)
+#define PINMUX_GPIO8__FUNC_LTE_MD32_JTAG_TDO (MTK_PIN_NO(8) | 4)
+#define PINMUX_GPIO8__FUNC_AP_MD32_JTAG_TDO (MTK_PIN_NO(8) | 5)
+
+#define PINMUX_GPIO9__FUNC_GPIO9 (MTK_PIN_NO(9) | 0)
+#define PINMUX_GPIO9__FUNC_USB_DRVVBUS (MTK_PIN_NO(9) | 1)
+#define PINMUX_GPIO9__FUNC_I2S2_MCK (MTK_PIN_NO(9) | 2)
+#define PINMUX_GPIO9__FUNC_LTE_MD32_JTAG_TRST (MTK_PIN_NO(9) | 4)
+#define PINMUX_GPIO9__FUNC_AP_MD32_JTAG_TRST (MTK_PIN_NO(9) | 5)
+
+#define PINMUX_GPIO10__FUNC_GPIO10 (MTK_PIN_NO(10) | 0)
+#define PINMUX_GPIO10__FUNC_I2S0_WS (MTK_PIN_NO(10) | 2)
+
+#define PINMUX_GPIO11__FUNC_GPIO11 (MTK_PIN_NO(11) | 0)
+#define PINMUX_GPIO11__FUNC_I2S0_BCK (MTK_PIN_NO(11) | 2)
+
+#define PINMUX_GPIO12__FUNC_GPIO12 (MTK_PIN_NO(12) | 0)
+#define PINMUX_GPIO12__FUNC_I2S0_MCK (MTK_PIN_NO(12) | 2)
+
+#define PINMUX_GPIO13__FUNC_GPIO13 (MTK_PIN_NO(13) | 0)
+#define PINMUX_GPIO13__FUNC_I2S0_DO (MTK_PIN_NO(13) | 2)
+
+#define PINMUX_GPIO14__FUNC_GPIO14 (MTK_PIN_NO(14) | 0)
+#define PINMUX_GPIO14__FUNC_I2S0_DI (MTK_PIN_NO(14) | 2)
+#define PINMUX_GPIO14__FUNC_DISP_PWM1 (MTK_PIN_NO(14) | 3)
+#define PINMUX_GPIO14__FUNC_PWM4 (MTK_PIN_NO(14) | 4)
+#define PINMUX_GPIO14__FUNC_IRDA_RXD (MTK_PIN_NO(14) | 5)
+#define PINMUX_GPIO14__FUNC_I2S1_BCK (MTK_PIN_NO(14) | 6)
+
+#define PINMUX_GPIO15__FUNC_GPIO15 (MTK_PIN_NO(15) | 0)
+#define PINMUX_GPIO15__FUNC_DSI1_TE (MTK_PIN_NO(15) | 2)
+#define PINMUX_GPIO15__FUNC_USB_DRVVBUS (MTK_PIN_NO(15) | 3)
+#define PINMUX_GPIO15__FUNC_PWM5 (MTK_PIN_NO(15) | 4)
+#define PINMUX_GPIO15__FUNC_IRDA_TXD (MTK_PIN_NO(15) | 5)
+#define PINMUX_GPIO15__FUNC_I2S1_MCK (MTK_PIN_NO(15) | 6)
+
+#define PINMUX_GPIO16__FUNC_GPIO16 (MTK_PIN_NO(16) | 0)
+#define PINMUX_GPIO16__FUNC_IDDIG (MTK_PIN_NO(16) | 1)
+#define PINMUX_GPIO16__FUNC_FLASH (MTK_PIN_NO(16) | 2)
+#define PINMUX_GPIO16__FUNC_EXT_FRAME_SYNC (MTK_PIN_NO(16) | 3)
+#define PINMUX_GPIO16__FUNC_PWM5 (MTK_PIN_NO(16) | 4)
+
+#define PINMUX_GPIO17__FUNC_GPIO17 (MTK_PIN_NO(17) | 0)
+#define PINMUX_GPIO17__FUNC_SIM1_SCLK (MTK_PIN_NO(17) | 1)
+#define PINMUX_GPIO17__FUNC_SIM2_SCLK (MTK_PIN_NO(17) | 2)
+
+#define PINMUX_GPIO18__FUNC_GPIO18 (MTK_PIN_NO(18) | 0)
+#define PINMUX_GPIO18__FUNC_SIM1_SRST (MTK_PIN_NO(18) | 1)
+#define PINMUX_GPIO18__FUNC_SIM2_SRST (MTK_PIN_NO(18) | 2)
+
+#define PINMUX_GPIO19__FUNC_GPIO19 (MTK_PIN_NO(19) | 0)
+#define PINMUX_GPIO19__FUNC_SIM1_SDAT (MTK_PIN_NO(19) | 1)
+#define PINMUX_GPIO19__FUNC_SIM2_SDAT (MTK_PIN_NO(19) | 2)
+
+#define PINMUX_GPIO20__FUNC_GPIO20 (MTK_PIN_NO(20) | 0)
+#define PINMUX_GPIO20__FUNC_SIM2_SCLK (MTK_PIN_NO(20) | 1)
+#define PINMUX_GPIO20__FUNC_SIM1_SCLK (MTK_PIN_NO(20) | 2)
+
+#define PINMUX_GPIO21__FUNC_GPIO21 (MTK_PIN_NO(21) | 0)
+#define PINMUX_GPIO21__FUNC_SIM2_SRST (MTK_PIN_NO(21) | 1)
+#define PINMUX_GPIO21__FUNC_SIM1_SRST (MTK_PIN_NO(21) | 2)
+
+#define PINMUX_GPIO22__FUNC_GPIO22 (MTK_PIN_NO(22) | 0)
+#define PINMUX_GPIO22__FUNC_SIM2_SDAT (MTK_PIN_NO(22) | 1)
+#define PINMUX_GPIO22__FUNC_SIM1_SDAT (MTK_PIN_NO(22) | 2)
+
+#define PINMUX_GPIO23__FUNC_GPIO23 (MTK_PIN_NO(23) | 0)
+#define PINMUX_GPIO23__FUNC_MSDC3_DAT0 (MTK_PIN_NO(23) | 1)
+
+#define PINMUX_GPIO24__FUNC_GPIO24 (MTK_PIN_NO(24) | 0)
+#define PINMUX_GPIO24__FUNC_MSDC3_DAT1 (MTK_PIN_NO(24) | 1)
+
+#define PINMUX_GPIO25__FUNC_GPIO25 (MTK_PIN_NO(25) | 0)
+#define PINMUX_GPIO25__FUNC_MSDC3_DAT2 (MTK_PIN_NO(25) | 1)
+
+#define PINMUX_GPIO26__FUNC_GPIO26 (MTK_PIN_NO(26) | 0)
+#define PINMUX_GPIO26__FUNC_MSDC3_DAT3 (MTK_PIN_NO(26) | 1)
+
+#define PINMUX_GPIO27__FUNC_GPIO27 (MTK_PIN_NO(27) | 0)
+#define PINMUX_GPIO27__FUNC_MSDC3_CLK (MTK_PIN_NO(27) | 1)
+
+#define PINMUX_GPIO28__FUNC_GPIO28 (MTK_PIN_NO(28) | 0)
+#define PINMUX_GPIO28__FUNC_MSDC3_CMD (MTK_PIN_NO(28) | 1)
+
+#define PINMUX_GPIO29__FUNC_GPIO29 (MTK_PIN_NO(29) | 0)
+#define PINMUX_GPIO29__FUNC_PTA_RXD (MTK_PIN_NO(29) | 1)
+#define PINMUX_GPIO29__FUNC_UCTS2 (MTK_PIN_NO(29) | 2)
+
+#define PINMUX_GPIO30__FUNC_GPIO30 (MTK_PIN_NO(30) | 0)
+#define PINMUX_GPIO30__FUNC_PTA_TXD (MTK_PIN_NO(30) | 1)
+#define PINMUX_GPIO30__FUNC_URTS2 (MTK_PIN_NO(30) | 2)
+
+#define PINMUX_GPIO31__FUNC_GPIO31 (MTK_PIN_NO(31) | 0)
+#define PINMUX_GPIO31__FUNC_URXD2 (MTK_PIN_NO(31) | 1)
+#define PINMUX_GPIO31__FUNC_UTXD2 (MTK_PIN_NO(31) | 2)
+
+#define PINMUX_GPIO32__FUNC_GPIO32 (MTK_PIN_NO(32) | 0)
+#define PINMUX_GPIO32__FUNC_UTXD2 (MTK_PIN_NO(32) | 1)
+#define PINMUX_GPIO32__FUNC_URXD2 (MTK_PIN_NO(32) | 2)
+
+#define PINMUX_GPIO33__FUNC_GPIO33 (MTK_PIN_NO(33) | 0)
+#define PINMUX_GPIO33__FUNC_MRG_CLK (MTK_PIN_NO(33) | 1)
+#define PINMUX_GPIO33__FUNC_PCM0_CLK (MTK_PIN_NO(33) | 2)
+
+#define PINMUX_GPIO34__FUNC_GPIO34 (MTK_PIN_NO(34) | 0)
+#define PINMUX_GPIO34__FUNC_MRG_DI (MTK_PIN_NO(34) | 1)
+#define PINMUX_GPIO34__FUNC_PCM0_DI (MTK_PIN_NO(34) | 2)
+
+#define PINMUX_GPIO35__FUNC_GPIO35 (MTK_PIN_NO(35) | 0)
+#define PINMUX_GPIO35__FUNC_MRG_DO (MTK_PIN_NO(35) | 1)
+#define PINMUX_GPIO35__FUNC_PCM0_DO (MTK_PIN_NO(35) | 2)
+
+#define PINMUX_GPIO36__FUNC_GPIO36 (MTK_PIN_NO(36) | 0)
+#define PINMUX_GPIO36__FUNC_MRG_SYNC (MTK_PIN_NO(36) | 1)
+#define PINMUX_GPIO36__FUNC_PCM0_SYNC (MTK_PIN_NO(36) | 2)
+
+#define PINMUX_GPIO37__FUNC_GPIO37 (MTK_PIN_NO(37) | 0)
+#define PINMUX_GPIO37__FUNC_GPS_SYNC (MTK_PIN_NO(37) | 1)
+
+#define PINMUX_GPIO38__FUNC_GPIO38 (MTK_PIN_NO(38) | 0)
+#define PINMUX_GPIO38__FUNC_DAIRSTB (MTK_PIN_NO(38) | 1)
+
+#define PINMUX_GPIO39__FUNC_GPIO39 (MTK_PIN_NO(39) | 0)
+#define PINMUX_GPIO39__FUNC_CM2MCLK (MTK_PIN_NO(39) | 1)
+
+#define PINMUX_GPIO40__FUNC_GPIO40 (MTK_PIN_NO(40) | 0)
+#define PINMUX_GPIO40__FUNC_CM3MCLK (MTK_PIN_NO(40) | 1)
+#define PINMUX_GPIO40__FUNC_IRDA_PDN (MTK_PIN_NO(40) | 2)
+#define PINMUX_GPIO40__FUNC_PWM6 (MTK_PIN_NO(40) | 3)
+#define PINMUX_GPIO40__FUNC_I2S1_WS (MTK_PIN_NO(40) | 4)
+
+#define PINMUX_GPIO41__FUNC_GPIO41 (MTK_PIN_NO(41) | 0)
+#define PINMUX_GPIO41__FUNC_CMPCLK (MTK_PIN_NO(41) | 1)
+#define PINMUX_GPIO41__FUNC_CMCSK (MTK_PIN_NO(41) | 2)
+#define PINMUX_GPIO41__FUNC_FLASH (MTK_PIN_NO(41) | 3)
+
+#define PINMUX_GPIO42__FUNC_GPIO42 (MTK_PIN_NO(42) | 0)
+#define PINMUX_GPIO42__FUNC_CMMCLK (MTK_PIN_NO(42) | 1)
+
+#define PINMUX_GPIO43__FUNC_GPIO43 (MTK_PIN_NO(43) | 0)
+#define PINMUX_GPIO43__FUNC_SDA2 (MTK_PIN_NO(43) | 1)
+
+#define PINMUX_GPIO44__FUNC_GPIO44 (MTK_PIN_NO(44) | 0)
+#define PINMUX_GPIO44__FUNC_SCL2 (MTK_PIN_NO(44) | 1)
+
+#define PINMUX_GPIO45__FUNC_GPIO45 (MTK_PIN_NO(45) | 0)
+#define PINMUX_GPIO45__FUNC_SDA0 (MTK_PIN_NO(45) | 1)
+
+#define PINMUX_GPIO46__FUNC_GPIO46 (MTK_PIN_NO(46) | 0)
+#define PINMUX_GPIO46__FUNC_SCL0 (MTK_PIN_NO(46) | 1)
+
+#define PINMUX_GPIO47__FUNC_GPIO47 (MTK_PIN_NO(47) | 0)
+#define PINMUX_GPIO47__FUNC_BPI_BUS0 (MTK_PIN_NO(47) | 1)
+
+#define PINMUX_GPIO48__FUNC_GPIO48 (MTK_PIN_NO(48) | 0)
+#define PINMUX_GPIO48__FUNC_BPI_BUS1 (MTK_PIN_NO(48) | 1)
+
+#define PINMUX_GPIO49__FUNC_GPIO49 (MTK_PIN_NO(49) | 0)
+#define PINMUX_GPIO49__FUNC_BPI_BUS2 (MTK_PIN_NO(49) | 1)
+
+#define PINMUX_GPIO50__FUNC_GPIO50 (MTK_PIN_NO(50) | 0)
+#define PINMUX_GPIO50__FUNC_BPI_BUS3 (MTK_PIN_NO(50) | 1)
+
+#define PINMUX_GPIO51__FUNC_GPIO51 (MTK_PIN_NO(51) | 0)
+#define PINMUX_GPIO51__FUNC_BPI_BUS4 (MTK_PIN_NO(51) | 1)
+
+#define PINMUX_GPIO52__FUNC_GPIO52 (MTK_PIN_NO(52) | 0)
+#define PINMUX_GPIO52__FUNC_BPI_BUS5 (MTK_PIN_NO(52) | 1)
+
+#define PINMUX_GPIO53__FUNC_GPIO53 (MTK_PIN_NO(53) | 0)
+#define PINMUX_GPIO53__FUNC_BPI_BUS6 (MTK_PIN_NO(53) | 1)
+
+#define PINMUX_GPIO54__FUNC_GPIO54 (MTK_PIN_NO(54) | 0)
+#define PINMUX_GPIO54__FUNC_BPI_BUS7 (MTK_PIN_NO(54) | 1)
+
+#define PINMUX_GPIO55__FUNC_GPIO55 (MTK_PIN_NO(55) | 0)
+#define PINMUX_GPIO55__FUNC_BPI_BUS8 (MTK_PIN_NO(55) | 1)
+
+#define PINMUX_GPIO56__FUNC_GPIO56 (MTK_PIN_NO(56) | 0)
+#define PINMUX_GPIO56__FUNC_BPI_BUS9 (MTK_PIN_NO(56) | 1)
+
+#define PINMUX_GPIO57__FUNC_GPIO57 (MTK_PIN_NO(57) | 0)
+#define PINMUX_GPIO57__FUNC_BPI_BUS10 (MTK_PIN_NO(57) | 1)
+
+#define PINMUX_GPIO58__FUNC_GPIO58 (MTK_PIN_NO(58) | 0)
+#define PINMUX_GPIO58__FUNC_BPI_BUS11 (MTK_PIN_NO(58) | 1)
+
+#define PINMUX_GPIO59__FUNC_GPIO59 (MTK_PIN_NO(59) | 0)
+#define PINMUX_GPIO59__FUNC_BPI_BUS12 (MTK_PIN_NO(59) | 1)
+
+#define PINMUX_GPIO60__FUNC_GPIO60 (MTK_PIN_NO(60) | 0)
+#define PINMUX_GPIO60__FUNC_BPI_BUS13 (MTK_PIN_NO(60) | 1)
+
+#define PINMUX_GPIO61__FUNC_GPIO61 (MTK_PIN_NO(61) | 0)
+#define PINMUX_GPIO61__FUNC_BPI_BUS14 (MTK_PIN_NO(61) | 1)
+
+#define PINMUX_GPIO62__FUNC_GPIO62 (MTK_PIN_NO(62) | 0)
+#define PINMUX_GPIO62__FUNC_RFIC1_BSI_CK (MTK_PIN_NO(62) | 1)
+
+#define PINMUX_GPIO63__FUNC_GPIO63 (MTK_PIN_NO(63) | 0)
+#define PINMUX_GPIO63__FUNC_RFIC1_BSI_D0 (MTK_PIN_NO(63) | 1)
+
+#define PINMUX_GPIO64__FUNC_GPIO64 (MTK_PIN_NO(64) | 0)
+#define PINMUX_GPIO64__FUNC_RFIC1_BSI_D1 (MTK_PIN_NO(64) | 1)
+
+#define PINMUX_GPIO65__FUNC_GPIO65 (MTK_PIN_NO(65) | 0)
+#define PINMUX_GPIO65__FUNC_RFIC1_BSI_D2 (MTK_PIN_NO(65) | 1)
+
+#define PINMUX_GPIO66__FUNC_GPIO66 (MTK_PIN_NO(66) | 0)
+#define PINMUX_GPIO66__FUNC_RFIC1_BSI_CS (MTK_PIN_NO(66) | 1)
+
+#define PINMUX_GPIO67__FUNC_GPIO67 (MTK_PIN_NO(67) | 0)
+#define PINMUX_GPIO67__FUNC_TD_TXBPI (MTK_PIN_NO(67) | 1)
+
+#define PINMUX_GPIO68__FUNC_GPIO68 (MTK_PIN_NO(68) | 0)
+#define PINMUX_GPIO68__FUNC_RFIC0_BSI_CK (MTK_PIN_NO(68) | 1)
+
+#define PINMUX_GPIO69__FUNC_GPIO69 (MTK_PIN_NO(69) | 0)
+#define PINMUX_GPIO69__FUNC_RFIC0_BSI_D0 (MTK_PIN_NO(69) | 1)
+
+#define PINMUX_GPIO70__FUNC_GPIO70 (MTK_PIN_NO(70) | 0)
+#define PINMUX_GPIO70__FUNC_RFIC0_BSI_D1 (MTK_PIN_NO(70) | 1)
+
+#define PINMUX_GPIO71__FUNC_GPIO71 (MTK_PIN_NO(71) | 0)
+#define PINMUX_GPIO71__FUNC_RFIC0_BSI_D2 (MTK_PIN_NO(71) | 1)
+
+#define PINMUX_GPIO72__FUNC_GPIO72 (MTK_PIN_NO(72) | 0)
+#define PINMUX_GPIO72__FUNC_RFIC0_BSI_CS (MTK_PIN_NO(72) | 1)
+
+#define PINMUX_GPIO73__FUNC_GPIO73 (MTK_PIN_NO(73) | 0)
+#define PINMUX_GPIO73__FUNC_MISC_BSI_DO (MTK_PIN_NO(73) | 1)
+
+#define PINMUX_GPIO74__FUNC_GPIO74 (MTK_PIN_NO(74) | 0)
+#define PINMUX_GPIO74__FUNC_MISC_BSI_CK (MTK_PIN_NO(74) | 1)
+
+#define PINMUX_GPIO75__FUNC_GPIO75 (MTK_PIN_NO(75) | 0)
+#define PINMUX_GPIO75__FUNC_MISC_BSI_CS0B (MTK_PIN_NO(75) | 1)
+#define PINMUX_GPIO75__FUNC_MIPI1_SCLK (MTK_PIN_NO(75) | 2)
+
+#define PINMUX_GPIO76__FUNC_GPIO76 (MTK_PIN_NO(76) | 0)
+#define PINMUX_GPIO76__FUNC_MISC_BSI_CS1B (MTK_PIN_NO(76) | 1)
+
+#define PINMUX_GPIO77__FUNC_GPIO77 (MTK_PIN_NO(77) | 0)
+#define PINMUX_GPIO77__FUNC_MISC_BSI_DI (MTK_PIN_NO(77) | 1)
+#define PINMUX_GPIO77__FUNC_MIPI1_SDATA (MTK_PIN_NO(77) | 2)
+
+#define PINMUX_GPIO78__FUNC_GPIO78 (MTK_PIN_NO(78) | 0)
+#define PINMUX_GPIO78__FUNC_LTE_TXBPI (MTK_PIN_NO(78) | 1)
+
+#define PINMUX_GPIO79__FUNC_GPIO79 (MTK_PIN_NO(79) | 0)
+#define PINMUX_GPIO79__FUNC_BPI_BUS15 (MTK_PIN_NO(79) | 1)
+
+#define PINMUX_GPIO80__FUNC_GPIO80 (MTK_PIN_NO(80) | 0)
+#define PINMUX_GPIO80__FUNC_BPI_BUS16 (MTK_PIN_NO(80) | 1)
+
+#define PINMUX_GPIO81__FUNC_GPIO81 (MTK_PIN_NO(81) | 0)
+#define PINMUX_GPIO81__FUNC_BPI_BUS17 (MTK_PIN_NO(81) | 1)
+
+#define PINMUX_GPIO82__FUNC_GPIO82 (MTK_PIN_NO(82) | 0)
+#define PINMUX_GPIO82__FUNC_BPI_BUS18 (MTK_PIN_NO(82) | 1)
+
+#define PINMUX_GPIO83__FUNC_GPIO83 (MTK_PIN_NO(83) | 0)
+#define PINMUX_GPIO83__FUNC_BPI_BUS19 (MTK_PIN_NO(83) | 1)
+
+#define PINMUX_GPIO84__FUNC_GPIO84 (MTK_PIN_NO(84) | 0)
+#define PINMUX_GPIO84__FUNC_BPI_BUS20 (MTK_PIN_NO(84) | 1)
+
+#define PINMUX_GPIO85__FUNC_GPIO85 (MTK_PIN_NO(85) | 0)
+#define PINMUX_GPIO85__FUNC_BPI_BUS21 (MTK_PIN_NO(85) | 1)
+
+#define PINMUX_GPIO86__FUNC_GPIO86 (MTK_PIN_NO(86) | 0)
+#define PINMUX_GPIO86__FUNC_BPI_BUS22 (MTK_PIN_NO(86) | 1)
+
+#define PINMUX_GPIO87__FUNC_GPIO87 (MTK_PIN_NO(87) | 0)
+#define PINMUX_GPIO87__FUNC_BPI_BUS23 (MTK_PIN_NO(87) | 1)
+
+#define PINMUX_GPIO88__FUNC_GPIO88 (MTK_PIN_NO(88) | 0)
+#define PINMUX_GPIO88__FUNC_BPI_BUS24 (MTK_PIN_NO(88) | 1)
+
+#define PINMUX_GPIO89__FUNC_GPIO89 (MTK_PIN_NO(89) | 0)
+#define PINMUX_GPIO89__FUNC_BPI_BUS25 (MTK_PIN_NO(89) | 1)
+
+#define PINMUX_GPIO90__FUNC_GPIO90 (MTK_PIN_NO(90) | 0)
+#define PINMUX_GPIO90__FUNC_BPI_BUS26 (MTK_PIN_NO(90) | 1)
+
+#define PINMUX_GPIO91__FUNC_GPIO91 (MTK_PIN_NO(91) | 0)
+#define PINMUX_GPIO91__FUNC_BPI_BUS27 (MTK_PIN_NO(91) | 1)
+
+#define PINMUX_GPIO92__FUNC_GPIO92 (MTK_PIN_NO(92) | 0)
+#define PINMUX_GPIO92__FUNC_PCM1_CLK (MTK_PIN_NO(92) | 1)
+#define PINMUX_GPIO92__FUNC_I2S0_BCK (MTK_PIN_NO(92) | 2)
+#define PINMUX_GPIO92__FUNC_NLD6 (MTK_PIN_NO(92) | 3)
+
+#define PINMUX_GPIO93__FUNC_GPIO93 (MTK_PIN_NO(93) | 0)
+#define PINMUX_GPIO93__FUNC_PCM1_SYNC (MTK_PIN_NO(93) | 1)
+#define PINMUX_GPIO93__FUNC_I2S0_WS (MTK_PIN_NO(93) | 2)
+#define PINMUX_GPIO93__FUNC_NLD7 (MTK_PIN_NO(93) | 3)
+
+#define PINMUX_GPIO94__FUNC_GPIO94 (MTK_PIN_NO(94) | 0)
+#define PINMUX_GPIO94__FUNC_PCM1_DI (MTK_PIN_NO(94) | 1)
+#define PINMUX_GPIO94__FUNC_I2S0_DI (MTK_PIN_NO(94) | 2)
+#define PINMUX_GPIO94__FUNC_NREB (MTK_PIN_NO(94) | 3)
+
+#define PINMUX_GPIO95__FUNC_GPIO95 (MTK_PIN_NO(95) | 0)
+#define PINMUX_GPIO95__FUNC_PCM1_DO (MTK_PIN_NO(95) | 1)
+#define PINMUX_GPIO95__FUNC_I2S0_DO (MTK_PIN_NO(95) | 2)
+#define PINMUX_GPIO95__FUNC_NRNB0 (MTK_PIN_NO(95) | 3)
+
+#define PINMUX_GPIO96__FUNC_GPIO96 (MTK_PIN_NO(96) | 0)
+#define PINMUX_GPIO96__FUNC_URXD1 (MTK_PIN_NO(96) | 1)
+#define PINMUX_GPIO96__FUNC_UTXD1 (MTK_PIN_NO(96) | 2)
+#define PINMUX_GPIO96__FUNC_NWEB (MTK_PIN_NO(96) | 3)
+
+#define PINMUX_GPIO97__FUNC_GPIO97 (MTK_PIN_NO(97) | 0)
+#define PINMUX_GPIO97__FUNC_UTXD1 (MTK_PIN_NO(97) | 1)
+#define PINMUX_GPIO97__FUNC_URXD1 (MTK_PIN_NO(97) | 2)
+#define PINMUX_GPIO97__FUNC_NCEB0 (MTK_PIN_NO(97) | 3)
+
+#define PINMUX_GPIO98__FUNC_GPIO98 (MTK_PIN_NO(98) | 0)
+#define PINMUX_GPIO98__FUNC_URTS1 (MTK_PIN_NO(98) | 1)
+#define PINMUX_GPIO98__FUNC_UCTS1 (MTK_PIN_NO(98) | 2)
+#define PINMUX_GPIO98__FUNC_NALE (MTK_PIN_NO(98) | 3)
+
+#define PINMUX_GPIO99__FUNC_GPIO99 (MTK_PIN_NO(99) | 0)
+#define PINMUX_GPIO99__FUNC_UCTS1 (MTK_PIN_NO(99) | 1)
+#define PINMUX_GPIO99__FUNC_URTS1 (MTK_PIN_NO(99) | 2)
+#define PINMUX_GPIO99__FUNC_NCLE (MTK_PIN_NO(99) | 3)
+
+#define PINMUX_GPIO100__FUNC_GPIO100 (MTK_PIN_NO(100) | 0)
+#define PINMUX_GPIO100__FUNC_MSDC2_DAT0 (MTK_PIN_NO(100) | 1)
+#define PINMUX_GPIO100__FUNC_URXD1 (MTK_PIN_NO(100) | 2)
+#define PINMUX_GPIO100__FUNC_USB_DRVVBUS (MTK_PIN_NO(100) | 3)
+#define PINMUX_GPIO100__FUNC_SDA4 (MTK_PIN_NO(100) | 4)
+
+#define PINMUX_GPIO101__FUNC_GPIO101 (MTK_PIN_NO(101) | 0)
+#define PINMUX_GPIO101__FUNC_MSDC2_DAT1 (MTK_PIN_NO(101) | 1)
+#define PINMUX_GPIO101__FUNC_UTXD1 (MTK_PIN_NO(101) | 2)
+#define PINMUX_GPIO101__FUNC_SCL4 (MTK_PIN_NO(101) | 4)
+
+#define PINMUX_GPIO102__FUNC_GPIO102 (MTK_PIN_NO(102) | 0)
+#define PINMUX_GPIO102__FUNC_MSDC2_DAT2 (MTK_PIN_NO(102) | 1)
+#define PINMUX_GPIO102__FUNC_URTS1 (MTK_PIN_NO(102) | 2)
+#define PINMUX_GPIO102__FUNC_UTXD0 (MTK_PIN_NO(102) | 3)
+#define PINMUX_GPIO102__FUNC_PWM0 (MTK_PIN_NO(102) | 5)
+#define PINMUX_GPIO102__FUNC_SPI_CK_1 (MTK_PIN_NO(102) | 6)
+
+#define PINMUX_GPIO103__FUNC_GPIO103 (MTK_PIN_NO(103) | 0)
+#define PINMUX_GPIO103__FUNC_MSDC2_DAT3 (MTK_PIN_NO(103) | 1)
+#define PINMUX_GPIO103__FUNC_UCTS1 (MTK_PIN_NO(103) | 2)
+#define PINMUX_GPIO103__FUNC_URXD0 (MTK_PIN_NO(103) | 3)
+#define PINMUX_GPIO103__FUNC_PWM1 (MTK_PIN_NO(103) | 5)
+#define PINMUX_GPIO103__FUNC_SPI_MI_1 (MTK_PIN_NO(103) | 6)
+
+#define PINMUX_GPIO104__FUNC_GPIO104 (MTK_PIN_NO(104) | 0)
+#define PINMUX_GPIO104__FUNC_MSDC2_CLK (MTK_PIN_NO(104) | 1)
+#define PINMUX_GPIO104__FUNC_NLD4 (MTK_PIN_NO(104) | 2)
+#define PINMUX_GPIO104__FUNC_UTXD3 (MTK_PIN_NO(104) | 3)
+#define PINMUX_GPIO104__FUNC_SDA3 (MTK_PIN_NO(104) | 4)
+#define PINMUX_GPIO104__FUNC_PWM2 (MTK_PIN_NO(104) | 5)
+#define PINMUX_GPIO104__FUNC_SPI_MO_1 (MTK_PIN_NO(104) | 6)
+
+#define PINMUX_GPIO105__FUNC_GPIO105 (MTK_PIN_NO(105) | 0)
+#define PINMUX_GPIO105__FUNC_MSDC2_CMD (MTK_PIN_NO(105) | 1)
+#define PINMUX_GPIO105__FUNC_NLD5 (MTK_PIN_NO(105) | 2)
+#define PINMUX_GPIO105__FUNC_URXD3 (MTK_PIN_NO(105) | 3)
+#define PINMUX_GPIO105__FUNC_SCL3 (MTK_PIN_NO(105) | 4)
+#define PINMUX_GPIO105__FUNC_PWM3 (MTK_PIN_NO(105) | 5)
+#define PINMUX_GPIO105__FUNC_SPI_CS_1 (MTK_PIN_NO(105) | 6)
+
+#define PINMUX_GPIO106__FUNC_GPIO106 (MTK_PIN_NO(106) | 0)
+#define PINMUX_GPIO106__FUNC_LCM_RST (MTK_PIN_NO(106) | 1)
+
+#define PINMUX_GPIO107__FUNC_GPIO107 (MTK_PIN_NO(107) | 0)
+#define PINMUX_GPIO107__FUNC_DSI_TE (MTK_PIN_NO(107) | 1)
+
+#define PINMUX_GPIO108__FUNC_GPIO108 (MTK_PIN_NO(108) | 0)
+#define PINMUX_GPIO108__FUNC_JTMS (MTK_PIN_NO(108) | 1)
+#define PINMUX_GPIO108__FUNC_MFG_JTAG_TMS (MTK_PIN_NO(108) | 2)
+#define PINMUX_GPIO108__FUNC_TDD_TMS (MTK_PIN_NO(108) | 3)
+#define PINMUX_GPIO108__FUNC_LTE_MD32_JTAG_TMS (MTK_PIN_NO(108) | 4)
+#define PINMUX_GPIO108__FUNC_AP_MD32_JTAG_TMS (MTK_PIN_NO(108) | 5)
+#define PINMUX_GPIO108__FUNC_DFD_TMS (MTK_PIN_NO(108) | 6)
+
+#define PINMUX_GPIO109__FUNC_GPIO109 (MTK_PIN_NO(109) | 0)
+#define PINMUX_GPIO109__FUNC_JTCK (MTK_PIN_NO(109) | 1)
+#define PINMUX_GPIO109__FUNC_MFG_JTAG_TCK (MTK_PIN_NO(109) | 2)
+#define PINMUX_GPIO109__FUNC_TDD_TCK (MTK_PIN_NO(109) | 3)
+#define PINMUX_GPIO109__FUNC_LTE_MD32_JTAG_TCK (MTK_PIN_NO(109) | 4)
+#define PINMUX_GPIO109__FUNC_AP_MD32_JTAG_TCK (MTK_PIN_NO(109) | 5)
+#define PINMUX_GPIO109__FUNC_DFD_TCK (MTK_PIN_NO(109) | 6)
+
+#define PINMUX_GPIO110__FUNC_GPIO110 (MTK_PIN_NO(110) | 0)
+#define PINMUX_GPIO110__FUNC_JTDI (MTK_PIN_NO(110) | 1)
+#define PINMUX_GPIO110__FUNC_MFG_JTAG_TDI (MTK_PIN_NO(110) | 2)
+#define PINMUX_GPIO110__FUNC_TDD_TDI (MTK_PIN_NO(110) | 3)
+#define PINMUX_GPIO110__FUNC_LTE_MD32_JTAG_TDI (MTK_PIN_NO(110) | 4)
+#define PINMUX_GPIO110__FUNC_AP_MD32_JTAG_TDI (MTK_PIN_NO(110) | 5)
+#define PINMUX_GPIO110__FUNC_DFD_TDI (MTK_PIN_NO(110) | 6)
+
+#define PINMUX_GPIO111__FUNC_GPIO111 (MTK_PIN_NO(111) | 0)
+#define PINMUX_GPIO111__FUNC_JTDO (MTK_PIN_NO(111) | 1)
+#define PINMUX_GPIO111__FUNC_MFG_JTAG_TDO (MTK_PIN_NO(111) | 2)
+#define PINMUX_GPIO111__FUNC_TDD_TDO (MTK_PIN_NO(111) | 3)
+#define PINMUX_GPIO111__FUNC_LTE_MD32_JTAG_TDO (MTK_PIN_NO(111) | 4)
+#define PINMUX_GPIO111__FUNC_AP_MD32_JTAG_TDO (MTK_PIN_NO(111) | 5)
+#define PINMUX_GPIO111__FUNC_DFD_TDO (MTK_PIN_NO(111) | 6)
+
+#define PINMUX_GPIO112__FUNC_GPIO112 (MTK_PIN_NO(112) | 0)
+#define PINMUX_GPIO112__FUNC_JTRST_B (MTK_PIN_NO(112) | 1)
+#define PINMUX_GPIO112__FUNC_MFG_JTAG_TRSTN (MTK_PIN_NO(112) | 2)
+#define PINMUX_GPIO112__FUNC_TDD_TRSTN (MTK_PIN_NO(112) | 3)
+#define PINMUX_GPIO112__FUNC_LTE_MD32_JTAG_TRST (MTK_PIN_NO(112) | 4)
+#define PINMUX_GPIO112__FUNC_AP_MD32_JTAG_TRST (MTK_PIN_NO(112) | 5)
+#define PINMUX_GPIO112__FUNC_DFD_NTRST (MTK_PIN_NO(112) | 6)
+
+#define PINMUX_GPIO113__FUNC_GPIO113 (MTK_PIN_NO(113) | 0)
+#define PINMUX_GPIO113__FUNC_URXD0 (MTK_PIN_NO(113) | 1)
+#define PINMUX_GPIO113__FUNC_UTXD0 (MTK_PIN_NO(113) | 2)
+#define PINMUX_GPIO113__FUNC_MD_URXD (MTK_PIN_NO(113) | 3)
+#define PINMUX_GPIO113__FUNC_LTE_URXD (MTK_PIN_NO(113) | 4)
+#define PINMUX_GPIO113__FUNC_TDD_TXD (MTK_PIN_NO(113) | 5)
+#define PINMUX_GPIO113__FUNC_I2S2_WS (MTK_PIN_NO(113) | 6)
+
+#define PINMUX_GPIO114__FUNC_GPIO114 (MTK_PIN_NO(114) | 0)
+#define PINMUX_GPIO114__FUNC_UTXD0 (MTK_PIN_NO(114) | 1)
+#define PINMUX_GPIO114__FUNC_URXD0 (MTK_PIN_NO(114) | 2)
+#define PINMUX_GPIO114__FUNC_MD_UTXD (MTK_PIN_NO(114) | 3)
+#define PINMUX_GPIO114__FUNC_LTE_UTXD (MTK_PIN_NO(114) | 4)
+#define PINMUX_GPIO114__FUNC_TDD_TXD (MTK_PIN_NO(114) | 5)
+#define PINMUX_GPIO114__FUNC_I2S2_BCK (MTK_PIN_NO(114) | 6)
+
+#define PINMUX_GPIO115__FUNC_GPIO115 (MTK_PIN_NO(115) | 0)
+#define PINMUX_GPIO115__FUNC_URTS0 (MTK_PIN_NO(115) | 1)
+#define PINMUX_GPIO115__FUNC_UCTS0 (MTK_PIN_NO(115) | 2)
+#define PINMUX_GPIO115__FUNC_MD_URXD (MTK_PIN_NO(115) | 3)
+#define PINMUX_GPIO115__FUNC_LTE_URXD (MTK_PIN_NO(115) | 4)
+#define PINMUX_GPIO115__FUNC_TDD_TXD (MTK_PIN_NO(115) | 5)
+#define PINMUX_GPIO115__FUNC_I2S2_MCK (MTK_PIN_NO(115) | 6)
+
+#define PINMUX_GPIO116__FUNC_GPIO116 (MTK_PIN_NO(116) | 0)
+#define PINMUX_GPIO116__FUNC_UCTS0 (MTK_PIN_NO(116) | 1)
+#define PINMUX_GPIO116__FUNC_URTS0 (MTK_PIN_NO(116) | 2)
+#define PINMUX_GPIO116__FUNC_MD_UTXD (MTK_PIN_NO(116) | 3)
+#define PINMUX_GPIO116__FUNC_LTE_UTXD (MTK_PIN_NO(116) | 4)
+#define PINMUX_GPIO116__FUNC_TDD_TXD (MTK_PIN_NO(116) | 5)
+#define PINMUX_GPIO116__FUNC_I2S2_DI_1 (MTK_PIN_NO(116) | 6)
+
+#define PINMUX_GPIO117__FUNC_GPIO117 (MTK_PIN_NO(117) | 0)
+#define PINMUX_GPIO117__FUNC_URXD3 (MTK_PIN_NO(117) | 1)
+#define PINMUX_GPIO117__FUNC_UTXD3 (MTK_PIN_NO(117) | 2)
+#define PINMUX_GPIO117__FUNC_MD_URXD (MTK_PIN_NO(117) | 3)
+#define PINMUX_GPIO117__FUNC_LTE_URXD (MTK_PIN_NO(117) | 4)
+#define PINMUX_GPIO117__FUNC_TDD_TXD (MTK_PIN_NO(117) | 5)
+
+#define PINMUX_GPIO118__FUNC_GPIO118 (MTK_PIN_NO(118) | 0)
+#define PINMUX_GPIO118__FUNC_UTXD3 (MTK_PIN_NO(118) | 1)
+#define PINMUX_GPIO118__FUNC_URXD3 (MTK_PIN_NO(118) | 2)
+#define PINMUX_GPIO118__FUNC_MD_UTXD (MTK_PIN_NO(118) | 3)
+#define PINMUX_GPIO118__FUNC_LTE_UTXD (MTK_PIN_NO(118) | 4)
+#define PINMUX_GPIO118__FUNC_TDD_TXD (MTK_PIN_NO(118) | 5)
+
+#define PINMUX_GPIO119__FUNC_GPIO119 (MTK_PIN_NO(119) | 0)
+#define PINMUX_GPIO119__FUNC_KROW0 (MTK_PIN_NO(119) | 1)
+
+#define PINMUX_GPIO120__FUNC_GPIO120 (MTK_PIN_NO(120) | 0)
+#define PINMUX_GPIO120__FUNC_KROW1 (MTK_PIN_NO(120) | 1)
+#define PINMUX_GPIO120__FUNC_PWM6 (MTK_PIN_NO(120) | 3)
+
+#define PINMUX_GPIO121__FUNC_GPIO121 (MTK_PIN_NO(121) | 0)
+#define PINMUX_GPIO121__FUNC_KROW2 (MTK_PIN_NO(121) | 1)
+#define PINMUX_GPIO121__FUNC_IRDA_PDN (MTK_PIN_NO(121) | 2)
+#define PINMUX_GPIO121__FUNC_I2S1_DO_1 (MTK_PIN_NO(121) | 3)
+#define PINMUX_GPIO121__FUNC_USB_DRVVBUS (MTK_PIN_NO(121) | 4)
+#define PINMUX_GPIO121__FUNC_SPI_CK_2 (MTK_PIN_NO(121) | 5)
+#define PINMUX_GPIO121__FUNC_PWM4 (MTK_PIN_NO(121) | 6)
+
+#define PINMUX_GPIO122__FUNC_GPIO122 (MTK_PIN_NO(122) | 0)
+#define PINMUX_GPIO122__FUNC_KCOL0 (MTK_PIN_NO(122) | 1)
+
+#define PINMUX_GPIO123__FUNC_GPIO123 (MTK_PIN_NO(123) | 0)
+#define PINMUX_GPIO123__FUNC_KCOL1 (MTK_PIN_NO(123) | 1)
+#define PINMUX_GPIO123__FUNC_IRDA_RXD (MTK_PIN_NO(123) | 2)
+#define PINMUX_GPIO123__FUNC_I2S2_DI_2 (MTK_PIN_NO(123) | 3)
+#define PINMUX_GPIO123__FUNC_PWM5 (MTK_PIN_NO(123) | 4)
+
+#define PINMUX_GPIO124__FUNC_GPIO124 (MTK_PIN_NO(124) | 0)
+#define PINMUX_GPIO124__FUNC_KCOL2 (MTK_PIN_NO(124) | 1)
+#define PINMUX_GPIO124__FUNC_IRDA_TXD (MTK_PIN_NO(124) | 2)
+#define PINMUX_GPIO124__FUNC_I2S1_DO_2 (MTK_PIN_NO(124) | 3)
+#define PINMUX_GPIO124__FUNC_USB_DRVVBUS (MTK_PIN_NO(124) | 4)
+#define PINMUX_GPIO124__FUNC_SPI_MI_2 (MTK_PIN_NO(124) | 5)
+#define PINMUX_GPIO124__FUNC_PWM3 (MTK_PIN_NO(124) | 6)
+
+#define PINMUX_GPIO125__FUNC_GPIO125 (MTK_PIN_NO(125) | 0)
+#define PINMUX_GPIO125__FUNC_SDA1 (MTK_PIN_NO(125) | 1)
+
+#define PINMUX_GPIO126__FUNC_GPIO126 (MTK_PIN_NO(126) | 0)
+#define PINMUX_GPIO126__FUNC_SCL1 (MTK_PIN_NO(126) | 1)
+
+#define PINMUX_GPIO127__FUNC_GPIO127 (MTK_PIN_NO(127) | 0)
+#define PINMUX_GPIO127__FUNC_MD_EINT1 (MTK_PIN_NO(127) | 1)
+#define PINMUX_GPIO127__FUNC_DISP_PWM1 (MTK_PIN_NO(127) | 2)
+#define PINMUX_GPIO127__FUNC_SPI_MO_2 (MTK_PIN_NO(127) | 3)
+
+#define PINMUX_GPIO128__FUNC_GPIO128 (MTK_PIN_NO(128) | 0)
+#define PINMUX_GPIO128__FUNC_MD_EINT2 (MTK_PIN_NO(128) | 1)
+#define PINMUX_GPIO128__FUNC_DSI1_TE (MTK_PIN_NO(128) | 2)
+#define PINMUX_GPIO128__FUNC_SPI_CS_2 (MTK_PIN_NO(128) | 3)
+
+#define PINMUX_GPIO129__FUNC_GPIO129 (MTK_PIN_NO(129) | 0)
+#define PINMUX_GPIO129__FUNC_I2S3_WS (MTK_PIN_NO(129) | 1)
+#define PINMUX_GPIO129__FUNC_I2S2_WS (MTK_PIN_NO(129) | 2)
+#define PINMUX_GPIO129__FUNC_PWM0 (MTK_PIN_NO(129) | 3)
+
+#define PINMUX_GPIO130__FUNC_GPIO130 (MTK_PIN_NO(130) | 0)
+#define PINMUX_GPIO130__FUNC_I2S3_BCK (MTK_PIN_NO(130) | 1)
+#define PINMUX_GPIO130__FUNC_I2S2_BCK (MTK_PIN_NO(130) | 2)
+#define PINMUX_GPIO130__FUNC_PWM1 (MTK_PIN_NO(130) | 3)
+
+#define PINMUX_GPIO131__FUNC_GPIO131 (MTK_PIN_NO(131) | 0)
+#define PINMUX_GPIO131__FUNC_I2S3_MCK (MTK_PIN_NO(131) | 1)
+#define PINMUX_GPIO131__FUNC_I2S2_MCK (MTK_PIN_NO(131) | 2)
+#define PINMUX_GPIO131__FUNC_PWM2 (MTK_PIN_NO(131) | 3)
+
+#define PINMUX_GPIO132__FUNC_GPIO132 (MTK_PIN_NO(132) | 0)
+#define PINMUX_GPIO132__FUNC_I2S3_DO_1 (MTK_PIN_NO(132) | 1)
+#define PINMUX_GPIO132__FUNC_I2S2_DI_1 (MTK_PIN_NO(132) | 2)
+#define PINMUX_GPIO132__FUNC_PWM3 (MTK_PIN_NO(132) | 3)
+
+#define PINMUX_GPIO133__FUNC_GPIO133 (MTK_PIN_NO(133) | 0)
+#define PINMUX_GPIO133__FUNC_I2S3_DO_2 (MTK_PIN_NO(133) | 1)
+#define PINMUX_GPIO133__FUNC_I2S2_DI_2 (MTK_PIN_NO(133) | 2)
+#define PINMUX_GPIO133__FUNC_PWM4 (MTK_PIN_NO(133) | 3)
+
+#define PINMUX_GPIO134__FUNC_GPIO134 (MTK_PIN_NO(134) | 0)
+#define PINMUX_GPIO134__FUNC_I2S3_DO_3 (MTK_PIN_NO(134) | 1)
+#define PINMUX_GPIO134__FUNC_DISP_PWM1 (MTK_PIN_NO(134) | 2)
+#define PINMUX_GPIO134__FUNC_I2S1_DO_1 (MTK_PIN_NO(134) | 3)
+#define PINMUX_GPIO134__FUNC_PWM5 (MTK_PIN_NO(134) | 4)
+
+#define PINMUX_GPIO135__FUNC_GPIO135 (MTK_PIN_NO(135) | 0)
+#define PINMUX_GPIO135__FUNC_I2S3_DO_4 (MTK_PIN_NO(135) | 1)
+#define PINMUX_GPIO135__FUNC_DSI1_TE (MTK_PIN_NO(135) | 2)
+#define PINMUX_GPIO135__FUNC_I2S1_DO_2 (MTK_PIN_NO(135) | 3)
+#define PINMUX_GPIO135__FUNC_PWM6 (MTK_PIN_NO(135) | 4)
+
+#define PINMUX_GPIO136__FUNC_GPIO136 (MTK_PIN_NO(136) | 0)
+#define PINMUX_GPIO136__FUNC_SDA3 (MTK_PIN_NO(136) | 1)
+
+#define PINMUX_GPIO137__FUNC_GPIO137 (MTK_PIN_NO(137) | 0)
+#define PINMUX_GPIO137__FUNC_SCL3 (MTK_PIN_NO(137) | 1)
+
+#define PINMUX_GPIO138__FUNC_GPIO138 (MTK_PIN_NO(138) | 0)
+#define PINMUX_GPIO138__FUNC_DPI_CK (MTK_PIN_NO(138) | 1)
+#define PINMUX_GPIO138__FUNC_NLD6 (MTK_PIN_NO(138) | 2)
+#define PINMUX_GPIO138__FUNC_UTXD0 (MTK_PIN_NO(138) | 3)
+#define PINMUX_GPIO138__FUNC_USB_DRVVBUS (MTK_PIN_NO(138) | 4)
+#define PINMUX_GPIO138__FUNC_IRDA_PDN (MTK_PIN_NO(138) | 5)
+
+#define PINMUX_GPIO139__FUNC_GPIO139 (MTK_PIN_NO(139) | 0)
+#define PINMUX_GPIO139__FUNC_DPI_DE (MTK_PIN_NO(139) | 1)
+#define PINMUX_GPIO139__FUNC_NLD7 (MTK_PIN_NO(139) | 2)
+#define PINMUX_GPIO139__FUNC_URXD0 (MTK_PIN_NO(139) | 3)
+#define PINMUX_GPIO139__FUNC_MD_UTXD (MTK_PIN_NO(139) | 4)
+#define PINMUX_GPIO139__FUNC_IRDA_RXD (MTK_PIN_NO(139) | 5)
+
+#define PINMUX_GPIO140__FUNC_GPIO140 (MTK_PIN_NO(140) | 0)
+#define PINMUX_GPIO140__FUNC_DPI_D0 (MTK_PIN_NO(140) | 1)
+#define PINMUX_GPIO140__FUNC_NREB (MTK_PIN_NO(140) | 2)
+#define PINMUX_GPIO140__FUNC_UCTS0 (MTK_PIN_NO(140) | 3)
+#define PINMUX_GPIO140__FUNC_MD_URXD (MTK_PIN_NO(140) | 4)
+#define PINMUX_GPIO140__FUNC_IRDA_TXD (MTK_PIN_NO(140) | 5)
+
+#define PINMUX_GPIO141__FUNC_GPIO141 (MTK_PIN_NO(141) | 0)
+#define PINMUX_GPIO141__FUNC_DPI_D1 (MTK_PIN_NO(141) | 1)
+#define PINMUX_GPIO141__FUNC_NRNB0 (MTK_PIN_NO(141) | 2)
+#define PINMUX_GPIO141__FUNC_URTS0 (MTK_PIN_NO(141) | 3)
+#define PINMUX_GPIO141__FUNC_LTE_UTXD (MTK_PIN_NO(141) | 4)
+#define PINMUX_GPIO141__FUNC_I2S2_WS (MTK_PIN_NO(141) | 5)
+
+#define PINMUX_GPIO142__FUNC_GPIO142 (MTK_PIN_NO(142) | 0)
+#define PINMUX_GPIO142__FUNC_DPI_D2 (MTK_PIN_NO(142) | 1)
+#define PINMUX_GPIO142__FUNC_NWEB (MTK_PIN_NO(142) | 2)
+#define PINMUX_GPIO142__FUNC_UTXD1 (MTK_PIN_NO(142) | 3)
+#define PINMUX_GPIO142__FUNC_LTE_URXD (MTK_PIN_NO(142) | 4)
+#define PINMUX_GPIO142__FUNC_I2S2_BCK (MTK_PIN_NO(142) | 5)
+
+#define PINMUX_GPIO143__FUNC_GPIO143 (MTK_PIN_NO(143) | 0)
+#define PINMUX_GPIO143__FUNC_DPI_D3 (MTK_PIN_NO(143) | 1)
+#define PINMUX_GPIO143__FUNC_NCEB0 (MTK_PIN_NO(143) | 2)
+#define PINMUX_GPIO143__FUNC_URXD1 (MTK_PIN_NO(143) | 3)
+#define PINMUX_GPIO143__FUNC_TDD_TXD (MTK_PIN_NO(143) | 4)
+#define PINMUX_GPIO143__FUNC_I2S2_MCK (MTK_PIN_NO(143) | 5)
+
+#define PINMUX_GPIO144__FUNC_GPIO144 (MTK_PIN_NO(144) | 0)
+#define PINMUX_GPIO144__FUNC_DPI_D4 (MTK_PIN_NO(144) | 1)
+#define PINMUX_GPIO144__FUNC_NALE (MTK_PIN_NO(144) | 2)
+#define PINMUX_GPIO144__FUNC_UCTS1 (MTK_PIN_NO(144) | 3)
+#define PINMUX_GPIO144__FUNC_TDD_TMS (MTK_PIN_NO(144) | 4)
+#define PINMUX_GPIO144__FUNC_I2S2_DI_1 (MTK_PIN_NO(144) | 5)
+
+#define PINMUX_GPIO145__FUNC_GPIO145 (MTK_PIN_NO(145) | 0)
+#define PINMUX_GPIO145__FUNC_DPI_D5 (MTK_PIN_NO(145) | 1)
+#define PINMUX_GPIO145__FUNC_NCLE (MTK_PIN_NO(145) | 2)
+#define PINMUX_GPIO145__FUNC_URTS1 (MTK_PIN_NO(145) | 3)
+#define PINMUX_GPIO145__FUNC_TDD_TCK (MTK_PIN_NO(145) | 4)
+#define PINMUX_GPIO145__FUNC_I2S2_DI_2 (MTK_PIN_NO(145) | 5)
+
+#define PINMUX_GPIO146__FUNC_GPIO146 (MTK_PIN_NO(146) | 0)
+#define PINMUX_GPIO146__FUNC_DPI_D6 (MTK_PIN_NO(146) | 1)
+#define PINMUX_GPIO146__FUNC_NLD8 (MTK_PIN_NO(146) | 2)
+#define PINMUX_GPIO146__FUNC_UTXD2 (MTK_PIN_NO(146) | 3)
+#define PINMUX_GPIO146__FUNC_TDD_TDI (MTK_PIN_NO(146) | 4)
+
+#define PINMUX_GPIO147__FUNC_GPIO147 (MTK_PIN_NO(147) | 0)
+#define PINMUX_GPIO147__FUNC_DPI_D7 (MTK_PIN_NO(147) | 1)
+#define PINMUX_GPIO147__FUNC_NLD9 (MTK_PIN_NO(147) | 2)
+#define PINMUX_GPIO147__FUNC_URXD2 (MTK_PIN_NO(147) | 3)
+#define PINMUX_GPIO147__FUNC_TDD_TDO (MTK_PIN_NO(147) | 4)
+#define PINMUX_GPIO147__FUNC_I2S1_WS (MTK_PIN_NO(147) | 5)
+
+#define PINMUX_GPIO148__FUNC_GPIO148 (MTK_PIN_NO(148) | 0)
+#define PINMUX_GPIO148__FUNC_DPI_D8 (MTK_PIN_NO(148) | 1)
+#define PINMUX_GPIO148__FUNC_NLD10 (MTK_PIN_NO(148) | 2)
+#define PINMUX_GPIO148__FUNC_UCTS2 (MTK_PIN_NO(148) | 3)
+#define PINMUX_GPIO148__FUNC_TDD_TRSTN (MTK_PIN_NO(148) | 4)
+#define PINMUX_GPIO148__FUNC_I2S1_BCK (MTK_PIN_NO(148) | 5)
+
+#define PINMUX_GPIO149__FUNC_GPIO149 (MTK_PIN_NO(149) | 0)
+#define PINMUX_GPIO149__FUNC_DPI_D9 (MTK_PIN_NO(149) | 1)
+#define PINMUX_GPIO149__FUNC_NLD11 (MTK_PIN_NO(149) | 2)
+#define PINMUX_GPIO149__FUNC_URTS2 (MTK_PIN_NO(149) | 3)
+#define PINMUX_GPIO149__FUNC_LTE_MD32_JTAG_TMS (MTK_PIN_NO(149) | 4)
+#define PINMUX_GPIO149__FUNC_I2S1_MCK (MTK_PIN_NO(149) | 5)
+
+#define PINMUX_GPIO150__FUNC_GPIO150 (MTK_PIN_NO(150) | 0)
+#define PINMUX_GPIO150__FUNC_DPI_D10 (MTK_PIN_NO(150) | 1)
+#define PINMUX_GPIO150__FUNC_NLD12 (MTK_PIN_NO(150) | 2)
+#define PINMUX_GPIO150__FUNC_UTXD3 (MTK_PIN_NO(150) | 3)
+#define PINMUX_GPIO150__FUNC_LTE_MD32_JTAG_TCK (MTK_PIN_NO(150) | 4)
+#define PINMUX_GPIO150__FUNC_I2S1_DO_1 (MTK_PIN_NO(150) | 5)
+
+#define PINMUX_GPIO151__FUNC_GPIO151 (MTK_PIN_NO(151) | 0)
+#define PINMUX_GPIO151__FUNC_DPI_D11 (MTK_PIN_NO(151) | 1)
+#define PINMUX_GPIO151__FUNC_NLD13 (MTK_PIN_NO(151) | 2)
+#define PINMUX_GPIO151__FUNC_URXD3 (MTK_PIN_NO(151) | 3)
+#define PINMUX_GPIO151__FUNC_LTE_MD32_JTAG_TDI (MTK_PIN_NO(151) | 4)
+#define PINMUX_GPIO151__FUNC_I2S1_DO_2 (MTK_PIN_NO(151) | 5)
+
+#define PINMUX_GPIO152__FUNC_GPIO152 (MTK_PIN_NO(152) | 0)
+#define PINMUX_GPIO152__FUNC_DPI_HSYNC (MTK_PIN_NO(152) | 1)
+#define PINMUX_GPIO152__FUNC_NLD14 (MTK_PIN_NO(152) | 2)
+#define PINMUX_GPIO152__FUNC_UCTS3 (MTK_PIN_NO(152) | 3)
+#define PINMUX_GPIO152__FUNC_LTE_MD32_JTAG_TDO (MTK_PIN_NO(152) | 4)
+#define PINMUX_GPIO152__FUNC_DSI1_TE (MTK_PIN_NO(152) | 5)
+
+#define PINMUX_GPIO153__FUNC_GPIO153 (MTK_PIN_NO(153) | 0)
+#define PINMUX_GPIO153__FUNC_DPI_VSYNC (MTK_PIN_NO(153) | 1)
+#define PINMUX_GPIO153__FUNC_NLD15 (MTK_PIN_NO(153) | 2)
+#define PINMUX_GPIO153__FUNC_URTS3 (MTK_PIN_NO(153) | 3)
+#define PINMUX_GPIO153__FUNC_LTE_MD32_JTAG_TRST (MTK_PIN_NO(153) | 4)
+#define PINMUX_GPIO153__FUNC_DISP_PWM1 (MTK_PIN_NO(153) | 5)
+
+#define PINMUX_GPIO154__FUNC_GPIO154 (MTK_PIN_NO(154) | 0)
+#define PINMUX_GPIO154__FUNC_MSDC0_DAT0 (MTK_PIN_NO(154) | 1)
+#define PINMUX_GPIO154__FUNC_NLD8 (MTK_PIN_NO(154) | 2)
+
+#define PINMUX_GPIO155__FUNC_GPIO155 (MTK_PIN_NO(155) | 0)
+#define PINMUX_GPIO155__FUNC_MSDC0_DAT1 (MTK_PIN_NO(155) | 1)
+#define PINMUX_GPIO155__FUNC_NLD9 (MTK_PIN_NO(155) | 2)
+
+#define PINMUX_GPIO156__FUNC_GPIO156 (MTK_PIN_NO(156) | 0)
+#define PINMUX_GPIO156__FUNC_MSDC0_DAT2 (MTK_PIN_NO(156) | 1)
+#define PINMUX_GPIO156__FUNC_NLD10 (MTK_PIN_NO(156) | 2)
+
+#define PINMUX_GPIO157__FUNC_GPIO157 (MTK_PIN_NO(157) | 0)
+#define PINMUX_GPIO157__FUNC_MSDC0_DAT3 (MTK_PIN_NO(157) | 1)
+#define PINMUX_GPIO157__FUNC_NLD11 (MTK_PIN_NO(157) | 2)
+
+#define PINMUX_GPIO158__FUNC_GPIO158 (MTK_PIN_NO(158) | 0)
+#define PINMUX_GPIO158__FUNC_MSDC0_DAT4 (MTK_PIN_NO(158) | 1)
+#define PINMUX_GPIO158__FUNC_NLD12 (MTK_PIN_NO(158) | 2)
+
+#define PINMUX_GPIO159__FUNC_GPIO159 (MTK_PIN_NO(159) | 0)
+#define PINMUX_GPIO159__FUNC_MSDC0_DAT5 (MTK_PIN_NO(159) | 1)
+#define PINMUX_GPIO159__FUNC_NLD13 (MTK_PIN_NO(159) | 2)
+
+#define PINMUX_GPIO160__FUNC_GPIO160 (MTK_PIN_NO(160) | 0)
+#define PINMUX_GPIO160__FUNC_MSDC0_DAT6 (MTK_PIN_NO(160) | 1)
+#define PINMUX_GPIO160__FUNC_NLD14 (MTK_PIN_NO(160) | 2)
+
+#define PINMUX_GPIO161__FUNC_GPIO161 (MTK_PIN_NO(161) | 0)
+#define PINMUX_GPIO161__FUNC_MSDC0_DAT7 (MTK_PIN_NO(161) | 1)
+#define PINMUX_GPIO161__FUNC_NLD15 (MTK_PIN_NO(161) | 2)
+
+#define PINMUX_GPIO162__FUNC_GPIO162 (MTK_PIN_NO(162) | 0)
+#define PINMUX_GPIO162__FUNC_MSDC0_CMD (MTK_PIN_NO(162) | 1)
+
+#define PINMUX_GPIO163__FUNC_GPIO163 (MTK_PIN_NO(163) | 0)
+#define PINMUX_GPIO163__FUNC_MSDC0_CLK (MTK_PIN_NO(163) | 1)
+
+#define PINMUX_GPIO164__FUNC_GPIO164 (MTK_PIN_NO(164) | 0)
+#define PINMUX_GPIO164__FUNC_MSDC0_DSL (MTK_PIN_NO(164) | 1)
+
+#define PINMUX_GPIO165__FUNC_GPIO165 (MTK_PIN_NO(165) | 0)
+#define PINMUX_GPIO165__FUNC_MSDC0_RSTB (MTK_PIN_NO(165) | 1)
+
+#define PINMUX_GPIO166__FUNC_GPIO166 (MTK_PIN_NO(166) | 0)
+#define PINMUX_GPIO166__FUNC_SPI_CK_0 (MTK_PIN_NO(166) | 1)
+#define PINMUX_GPIO166__FUNC_PWM0 (MTK_PIN_NO(166) | 3)
+
+#define PINMUX_GPIO167__FUNC_GPIO167 (MTK_PIN_NO(167) | 0)
+#define PINMUX_GPIO167__FUNC_SPI_MI_0 (MTK_PIN_NO(167) | 1)
+#define PINMUX_GPIO167__FUNC_PWM1 (MTK_PIN_NO(167) | 3)
+#define PINMUX_GPIO167__FUNC_SPI_MO_0 (MTK_PIN_NO(167) | 4)
+
+#define PINMUX_GPIO168__FUNC_GPIO168 (MTK_PIN_NO(168) | 0)
+#define PINMUX_GPIO168__FUNC_SPI_MO_0 (MTK_PIN_NO(168) | 1)
+#define PINMUX_GPIO168__FUNC_MD_EINT3 (MTK_PIN_NO(168) | 2)
+#define PINMUX_GPIO168__FUNC_PWM2 (MTK_PIN_NO(168) | 3)
+#define PINMUX_GPIO168__FUNC_SPI_MI_0 (MTK_PIN_NO(168) | 4)
+
+#define PINMUX_GPIO169__FUNC_GPIO169 (MTK_PIN_NO(169) | 0)
+#define PINMUX_GPIO169__FUNC_SPI_CS_0 (MTK_PIN_NO(169) | 1)
+#define PINMUX_GPIO169__FUNC_MD_EINT4 (MTK_PIN_NO(169) | 2)
+#define PINMUX_GPIO169__FUNC_PWM3 (MTK_PIN_NO(169) | 3)
+
+#define PINMUX_GPIO170__FUNC_GPIO170 (MTK_PIN_NO(170) | 0)
+#define PINMUX_GPIO170__FUNC_MSDC1_CMD (MTK_PIN_NO(170) | 1)
+
+#define PINMUX_GPIO171__FUNC_GPIO171 (MTK_PIN_NO(171) | 0)
+#define PINMUX_GPIO171__FUNC_MSDC1_DAT0 (MTK_PIN_NO(171) | 1)
+
+#define PINMUX_GPIO172__FUNC_GPIO172 (MTK_PIN_NO(172) | 0)
+#define PINMUX_GPIO172__FUNC_MSDC1_DAT1 (MTK_PIN_NO(172) | 1)
+
+#define PINMUX_GPIO173__FUNC_GPIO173 (MTK_PIN_NO(173) | 0)
+#define PINMUX_GPIO173__FUNC_MSDC1_DAT2 (MTK_PIN_NO(173) | 1)
+
+#define PINMUX_GPIO174__FUNC_GPIO174 (MTK_PIN_NO(174) | 0)
+#define PINMUX_GPIO174__FUNC_MSDC1_DAT3 (MTK_PIN_NO(174) | 1)
+
+#define PINMUX_GPIO175__FUNC_GPIO175 (MTK_PIN_NO(175) | 0)
+#define PINMUX_GPIO175__FUNC_MSDC1_CLK (MTK_PIN_NO(175) | 1)
+
+#define PINMUX_GPIO176__FUNC_GPIO176 (MTK_PIN_NO(176) | 0)
+#define PINMUX_GPIO176__FUNC_PWRAP_SPIMI (MTK_PIN_NO(176) | 1)
+#define PINMUX_GPIO176__FUNC_PWRAP_SPIMO (MTK_PIN_NO(176) | 2)
+
+#define PINMUX_GPIO177__FUNC_GPIO177 (MTK_PIN_NO(177) | 0)
+#define PINMUX_GPIO177__FUNC_PWRAP_SPIMO (MTK_PIN_NO(177) | 1)
+#define PINMUX_GPIO177__FUNC_PWRAP_SPIMI (MTK_PIN_NO(177) | 2)
+
+#define PINMUX_GPIO178__FUNC_GPIO178 (MTK_PIN_NO(178) | 0)
+#define PINMUX_GPIO178__FUNC_PWRAP_SPICK (MTK_PIN_NO(178) | 1)
+
+#define PINMUX_GPIO179__FUNC_GPIO179 (MTK_PIN_NO(179) | 0)
+#define PINMUX_GPIO179__FUNC_PWRAP_SPICS (MTK_PIN_NO(179) | 1)
+
+#define PINMUX_GPIO180__FUNC_GPIO180 (MTK_PIN_NO(180) | 0)
+#define PINMUX_GPIO180__FUNC_AUD_CLK_MOSI (MTK_PIN_NO(180) | 1)
+#define PINMUX_GPIO180__FUNC_I2S1_WS (MTK_PIN_NO(180) | 2)
+#define PINMUX_GPIO180__FUNC_I2S2_WS (MTK_PIN_NO(180) | 3)
+#define PINMUX_GPIO180__FUNC_I2S0_WS (MTK_PIN_NO(180) | 4)
+
+#define PINMUX_GPIO181__FUNC_GPIO181 (MTK_PIN_NO(181) | 0)
+#define PINMUX_GPIO181__FUNC_AUD_DAT_MISO_1 (MTK_PIN_NO(181) | 1)
+#define PINMUX_GPIO181__FUNC_I2S1_BCK (MTK_PIN_NO(181) | 2)
+#define PINMUX_GPIO181__FUNC_I2S2_BCK (MTK_PIN_NO(181) | 3)
+#define PINMUX_GPIO181__FUNC_I2S0_BCK (MTK_PIN_NO(181) | 4)
+
+#define PINMUX_GPIO182__FUNC_GPIO182 (MTK_PIN_NO(182) | 0)
+#define PINMUX_GPIO182__FUNC_AUD_DAT_MOSI_1 (MTK_PIN_NO(182) | 1)
+#define PINMUX_GPIO182__FUNC_I2S1_MCK (MTK_PIN_NO(182) | 2)
+#define PINMUX_GPIO182__FUNC_I2S2_MCK (MTK_PIN_NO(182) | 3)
+#define PINMUX_GPIO182__FUNC_I2S0_MCK (MTK_PIN_NO(182) | 4)
+
+#define PINMUX_GPIO183__FUNC_GPIO183 (MTK_PIN_NO(183) | 0)
+#define PINMUX_GPIO183__FUNC_AUD_DAT_MISO_2 (MTK_PIN_NO(183) | 1)
+#define PINMUX_GPIO183__FUNC_I2S1_DO_1 (MTK_PIN_NO(183) | 2)
+#define PINMUX_GPIO183__FUNC_I2S2_DI_1 (MTK_PIN_NO(183) | 3)
+#define PINMUX_GPIO183__FUNC_I2S0_DO (MTK_PIN_NO(183) | 4)
+
+#define PINMUX_GPIO184__FUNC_GPIO184 (MTK_PIN_NO(184) | 0)
+#define PINMUX_GPIO184__FUNC_AUD_DAT_MOSI_2 (MTK_PIN_NO(184) | 1)
+#define PINMUX_GPIO184__FUNC_I2S1_DO_2 (MTK_PIN_NO(184) | 2)
+#define PINMUX_GPIO184__FUNC_I2S2_DI_2 (MTK_PIN_NO(184) | 3)
+#define PINMUX_GPIO184__FUNC_I2S0_DI (MTK_PIN_NO(184) | 4)
+
+#define PINMUX_GPIO185__FUNC_GPIO185 (MTK_PIN_NO(185) | 0)
+#define PINMUX_GPIO185__FUNC_RTC32K_CK (MTK_PIN_NO(185) | 1)
+
+#define PINMUX_GPIO186__FUNC_GPIO186 (MTK_PIN_NO(186) | 0)
+#define PINMUX_GPIO186__FUNC_DISP_PWM0 (MTK_PIN_NO(186) | 1)
+#define PINMUX_GPIO186__FUNC_DISP_PWM1 (MTK_PIN_NO(186) | 2)
+
+#define PINMUX_GPIO187__FUNC_GPIO187 (MTK_PIN_NO(187) | 0)
+#define PINMUX_GPIO187__FUNC_SRCLKENAI (MTK_PIN_NO(187) | 1)
+
+#define PINMUX_GPIO188__FUNC_GPIO188 (MTK_PIN_NO(188) | 0)
+#define PINMUX_GPIO188__FUNC_SRCLKENAI2 (MTK_PIN_NO(188) | 1)
+
+#define PINMUX_GPIO189__FUNC_GPIO189 (MTK_PIN_NO(189) | 0)
+#define PINMUX_GPIO189__FUNC_SRCLKENA0 (MTK_PIN_NO(189) | 1)
+
+#define PINMUX_GPIO190__FUNC_GPIO190 (MTK_PIN_NO(190) | 0)
+#define PINMUX_GPIO190__FUNC_SRCLKENA1 (MTK_PIN_NO(190) | 1)
+
+#define PINMUX_GPIO191__FUNC_GPIO191 (MTK_PIN_NO(191) | 0)
+#define PINMUX_GPIO191__FUNC_WATCHDOG_AO (MTK_PIN_NO(191) | 1)
+
+#define PINMUX_GPIO192__FUNC_GPIO192 (MTK_PIN_NO(192) | 0)
+#define PINMUX_GPIO192__FUNC_I2S0_WS (MTK_PIN_NO(192) | 1)
+#define PINMUX_GPIO192__FUNC_I2S1_WS (MTK_PIN_NO(192) | 2)
+#define PINMUX_GPIO192__FUNC_I2S2_WS (MTK_PIN_NO(192) | 3)
+#define PINMUX_GPIO192__FUNC_NCEB1 (MTK_PIN_NO(192) | 4)
+
+#define PINMUX_GPIO193__FUNC_GPIO193 (MTK_PIN_NO(193) | 0)
+#define PINMUX_GPIO193__FUNC_I2S0_BCK (MTK_PIN_NO(193) | 1)
+#define PINMUX_GPIO193__FUNC_I2S1_BCK (MTK_PIN_NO(193) | 2)
+#define PINMUX_GPIO193__FUNC_I2S2_BCK (MTK_PIN_NO(193) | 3)
+#define PINMUX_GPIO193__FUNC_NRNB1 (MTK_PIN_NO(193) | 4)
+
+#define PINMUX_GPIO194__FUNC_GPIO194 (MTK_PIN_NO(194) | 0)
+#define PINMUX_GPIO194__FUNC_I2S0_MCK (MTK_PIN_NO(194) | 1)
+#define PINMUX_GPIO194__FUNC_I2S1_MCK (MTK_PIN_NO(194) | 2)
+#define PINMUX_GPIO194__FUNC_I2S2_MCK (MTK_PIN_NO(194) | 3)
+
+#define PINMUX_GPIO195__FUNC_GPIO195 (MTK_PIN_NO(195) | 0)
+#define PINMUX_GPIO195__FUNC_I2S0_DO (MTK_PIN_NO(195) | 1)
+#define PINMUX_GPIO195__FUNC_I2S1_DO_1 (MTK_PIN_NO(195) | 2)
+#define PINMUX_GPIO195__FUNC_I2S2_DI_1 (MTK_PIN_NO(195) | 3)
+
+#define PINMUX_GPIO196__FUNC_GPIO196 (MTK_PIN_NO(196) | 0)
+#define PINMUX_GPIO196__FUNC_I2S0_DI (MTK_PIN_NO(196) | 1)
+#define PINMUX_GPIO196__FUNC_I2S1_DO_2 (MTK_PIN_NO(196) | 2)
+#define PINMUX_GPIO196__FUNC_I2S2_DI_2 (MTK_PIN_NO(196) | 3)
+
+
+#endif