diff mbox series

[v6,6/7] arm64: dts: mt8195: Add efuse node to mt8195

Message ID 20220512122433.1399802-7-abailon@baylibre.com (mailing list archive)
State New, archived
Headers show
Series Add LVTS architecture thermal | expand

Commit Message

Alexandre Bailon May 12, 2022, 12:24 p.m. UTC
This adds the efuse node. This will be required by the thermal driver
to get the calibration data.

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
---
 arch/arm64/boot/dts/mediatek/mt8195.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 416d37e07324..12887fb4d0d1 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -13,6 +13,7 @@ 
 #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
 #include <dt-bindings/power/mt8195-power.h>
 #include <dt-bindings/reset/ti-syscon.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	compatible = "mediatek,mt8195";
@@ -1248,6 +1249,23 @@  nor_flash: spi@1132c000 {
 			status = "disabled";
 		};
 
+		efuse: efuse@11c10000 {
+			compatible = "mediatek,efuse";
+			reg = <0 0x11c10000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			lvts_e_data1: data1 {
+				reg = <0x1bc 0x14>;
+			};
+			lvts_e_data2: data1-1 {
+				reg = <0x1d0 0x38>;
+			};
+			svs_calibration: calib@580 {
+				reg = <0x580 0x64>;
+			};
+		};
+
 		u3phy2: t-phy@11c40000 {
 			compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3";
 			#address-cells = <1>;