diff mbox series

[1/2] pinctrl: mediatek: common: add quirk for broken set/clr modes

Message ID 20220530123425.689459-1-fparent@baylibre.com (mailing list archive)
State New, archived
Headers show
Series [1/2] pinctrl: mediatek: common: add quirk for broken set/clr modes | expand

Commit Message

Fabien Parent May 30, 2022, 12:34 p.m. UTC
On MT8365, the SET/CLR of the mode is broken and some pin modes won't
be set correctly. Add a quirk for such SoCs, so that instead of using
the SET/CLR register use the main R/W register
to read/update/write the modes.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
---
 drivers/pinctrl/mediatek/pinctrl-mtk-common.c | 46 ++++++++++++-------
 drivers/pinctrl/mediatek/pinctrl-mtk-common.h |  3 ++
 2 files changed, 33 insertions(+), 16 deletions(-)

Comments

AngeloGioacchino Del Regno June 10, 2022, 11:19 a.m. UTC | #1
Il 30/05/22 14:34, Fabien Parent ha scritto:
> On MT8365, the SET/CLR of the mode is broken and some pin modes won't
> be set correctly. Add a quirk for such SoCs, so that instead of using
> the SET/CLR register use the main R/W register
> to read/update/write the modes.
> 
> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> ---
>   drivers/pinctrl/mediatek/pinctrl-mtk-common.c | 46 ++++++++++++-------
>   drivers/pinctrl/mediatek/pinctrl-mtk-common.h |  3 ++
>   2 files changed, 33 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
> index f25b3e09386b..156627d9c552 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
> @@ -330,23 +330,37 @@ static int mtk_pconf_set_pull_select(struct mtk_pinctrl *pctl,
>   		return -EINVAL;
>   	}
>   

That's not the right way of doing that, unless there are other SoCs that are
actually affected by this issue (and besides, any *new* pinctrl driver should
be using pinctrl-mtk-common-v2, which accounts for this quirk already).

Since MT8365 seems to be the only SoC that is affected by this issue, there's
a spec_pull_set() callback that you can use and you can indeed define your own
function in mt8365-pinctrl.c instead... but this, only if I got it right (and
I think I did, but please recheck!):

In this function, the call to spec_pull_set assigns 'arg' if 'enable == true',
else, MTK_PUPD_SET_R1R0_00...
...for "generic pull config", as stated in a comment in this function, 'arg' will
always be either 0 or 1, so you will get passed either:
     - 1, if pull-enable; or
     - MTK_PUPD_SET_R1R0_00 (100) if pull-disable.

Though, if I got the '1' part wrong, it's still doable because you care only about
one value in your case, so, if you get a MTK_PUPD_SET_R1R0_00, this means that you
have to do pull-disable.

The other args are passed as they are, so that's golden.

Regards,
Angelo
Linus Walleij June 15, 2022, 1:23 p.m. UTC | #2
On Mon, May 30, 2022 at 2:35 PM Fabien Parent <fparent@baylibre.com> wrote:

> On MT8365, the SET/CLR of the mode is broken and some pin modes won't
> be set correctly. Add a quirk for such SoCs, so that instead of using
> the SET/CLR register use the main R/W register
> to read/update/write the modes.
>
> Signed-off-by: Fabien Parent <fparent@baylibre.com>

What is the state of this patch set? I see changes are requested by
Angelo, are they being addressed?

Yours,
Linus Walleij
Markus Schneider-Pargmann July 1, 2022, 7:35 a.m. UTC | #3
Hi Linus,

On Wed, Jun 15, 2022 at 03:23:57PM +0200, Linus Walleij wrote:
> On Mon, May 30, 2022 at 2:35 PM Fabien Parent <fparent@baylibre.com> wrote:
> 
> > On MT8365, the SET/CLR of the mode is broken and some pin modes won't
> > be set correctly. Add a quirk for such SoCs, so that instead of using
> > the SET/CLR register use the main R/W register
> > to read/update/write the modes.
> >
> > Signed-off-by: Fabien Parent <fparent@baylibre.com>
> 
> What is the state of this patch set? I see changes are requested by
> Angelo, are they being addressed?

I will probably pick up these patches and work on the comments, but I am
currently a bit busy on another project as well so it takes some time,
sorry.

Best,
Markus
diff mbox series

Patch

diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
index f25b3e09386b..156627d9c552 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
@@ -330,23 +330,37 @@  static int mtk_pconf_set_pull_select(struct mtk_pinctrl *pctl,
 		return -EINVAL;
 	}
 
-	bit = BIT(pin & pctl->devdata->mode_mask);
-	if (enable)
-		reg_pullen = SET_ADDR(mtk_get_port(pctl, pin) +
-			pctl->devdata->pullen_offset, pctl);
-	else
-		reg_pullen = CLR_ADDR(mtk_get_port(pctl, pin) +
-			pctl->devdata->pullen_offset, pctl);
-
-	if (isup)
-		reg_pullsel = SET_ADDR(mtk_get_port(pctl, pin) +
-			pctl->devdata->pullsel_offset, pctl);
-	else
-		reg_pullsel = CLR_ADDR(mtk_get_port(pctl, pin) +
-			pctl->devdata->pullsel_offset, pctl);
+	if (pctl->devdata->quirks & MTK_PINCTRL_MODE_SET_CLR_BROKEN) {
+		bit = pin & pctl->devdata->mode_mask;
+		reg_pullen = mtk_get_port(pctl, pin) +
+				pctl->devdata->pullen_offset;
+		reg_pullsel = mtk_get_port(pctl, pin) +
+				pctl->devdata->pullsel_offset;
+
+		regmap_update_bits(mtk_get_regmap(pctl, pin), reg_pullen,
+			BIT(bit), enable << bit);
+		regmap_update_bits(mtk_get_regmap(pctl, pin), reg_pullsel,
+			BIT(bit), isup << bit);
+	} else {
+		bit = BIT(pin & pctl->devdata->mode_mask);
+		if (enable)
+			reg_pullen = SET_ADDR(mtk_get_port(pctl, pin) +
+				pctl->devdata->pullen_offset, pctl);
+		else
+			reg_pullen = CLR_ADDR(mtk_get_port(pctl, pin) +
+				pctl->devdata->pullen_offset, pctl);
+
+		if (isup)
+			reg_pullsel = SET_ADDR(mtk_get_port(pctl, pin) +
+				pctl->devdata->pullsel_offset, pctl);
+		else
+			reg_pullsel = CLR_ADDR(mtk_get_port(pctl, pin) +
+				pctl->devdata->pullsel_offset, pctl);
+
+		regmap_write(mtk_get_regmap(pctl, pin), reg_pullen, bit);
+		regmap_write(mtk_get_regmap(pctl, pin), reg_pullsel, bit);
+	}
 
-	regmap_write(mtk_get_regmap(pctl, pin), reg_pullen, bit);
-	regmap_write(mtk_get_regmap(pctl, pin), reg_pullsel, bit);
 	return 0;
 }
 
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.h b/drivers/pinctrl/mediatek/pinctrl-mtk-common.h
index 6fe8564334c9..cc0dce8818c6 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.h
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.h
@@ -22,6 +22,8 @@ 
 
 #define MTK_PINCTRL_NOT_SUPPORT	(0xffff)
 
+#define MTK_PINCTRL_MODE_SET_CLR_BROKEN   BIT(0)
+
 struct mtk_desc_function {
 	const char *name;
 	unsigned char muxval;
@@ -271,6 +273,7 @@  struct mtk_pinctrl_devdata {
 	unsigned int mode_mask;
 	unsigned int mode_per_reg;
 	unsigned int mode_shf;
+	unsigned long quirks;
 };
 
 struct mtk_pinctrl {