| Message ID | 20220609112303.117928-5-angelogioacchino.delregno@collabora.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | MediaTek Helio X10 MT6795 - Devicetree, part 1 | expand |
diff --git a/arch/arm64/boot/dts/mediatek/mt6795.dtsi b/arch/arm64/boot/dts/mediatek/mt6795.dtsi index 639104b3f693..363fa25b4edc 100644 --- a/arch/arm64/boot/dts/mediatek/mt6795.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt6795.dtsi @@ -188,6 +188,14 @@ soc { compatible = "simple-bus"; ranges; + watchdog: watchdog@10007000 { + compatible = "mediatek,mt6795-wdt"; + reg = <0 0x10007000 0 0x100>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_LOW>; + #reset-cells = <1>; + timeout-sec = <20>; + }; + sysirq: intpol-controller@10200620 { compatible = "mediatek,mt6795-sysirq", "mediatek,mt6577-sysirq";
At least on commercial devices like some smartphones, the bootloader will initialize the SoC watchdog and set it to reboot the board when it times out. The last pet that this watchdog is getting is right before booting the kernel and left it enabled as a protection against boot failure: this means that Linux is expected to initialize this device and pet as soon as possible, or it will bark and reset the AP. In order to prevent that, add the required watchdog node as default enabled: this will have no side effects on boards that are not performing the aforementioned watchdog setup before booting Linux. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> --- arch/arm64/boot/dts/mediatek/mt6795.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+)