diff mbox series

[v11,04/12] drm/mediatek: dpi: implement a swap_input toggle in SoC config

Message ID 20220613064841.10481-5-rex-bc.chen@mediatek.com (mailing list archive)
State New, archived
Headers show
Series drm/mediatek: Add MT8195 dp_intf driver | expand

Commit Message

Rex-BC Chen (陳柏辰) June 13, 2022, 6:48 a.m. UTC 
From: Guillaume Ranquet <granquet@baylibre.com>

The hardware design of dp_intf does not support input swap, so we add
a bit of flexibility to support SoCs without swap_input support.

Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
[Bo-Chen: Add modification reason in commit message.]
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

Comments

CK Hu (胡俊光) June 14, 2022, 5:27 a.m. UTC | #1 
Hi, Bo-Chen:

On Mon, 2022-06-13 at 14:48 +0800, Bo-Chen Chen wrote:
> From: Guillaume Ranquet <granquet@baylibre.com>
> 
> The hardware design of dp_intf does not support input swap, so we add
> a bit of flexibility to support SoCs without swap_input support.
> 
> Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
> [Bo-Chen: Add modification reason in commit message.]
> Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
> Reviewed-by: AngeloGioacchino Del Regno <
> angelogioacchino.delregno@collabora.com>
> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 14 +++++++++++---
>  1 file changed, 11 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c
> b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 15218c1e8c11..c1438c744120 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -126,6 +126,7 @@ struct mtk_dpi_conf {
>  	const u32 *output_fmts;
>  	u32 num_output_fmts;
>  	bool is_ck_de_pol;
> +	bool swap_input_support;
>  	const struct mtk_dpi_yc_limit *limit;
>  };
>  
> @@ -378,18 +379,21 @@ static void mtk_dpi_config_color_format(struct
> mtk_dpi *dpi,
>  	    (format == MTK_DPI_COLOR_FORMAT_YCBCR_444_FULL)) {
>  		mtk_dpi_config_yuv422_enable(dpi, false);
>  		mtk_dpi_config_csc_enable(dpi, true);
> -		mtk_dpi_config_swap_input(dpi, false);
> +		if (dpi->conf->swap_input_support)
> +			mtk_dpi_config_swap_input(dpi, false);
>  		mtk_dpi_config_channel_swap(dpi,
> MTK_DPI_OUT_CHANNEL_SWAP_BGR);
>  	} else if ((format == MTK_DPI_COLOR_FORMAT_YCBCR_422) ||
>  		   (format == MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL)) {
>  		mtk_dpi_config_yuv422_enable(dpi, true);
>  		mtk_dpi_config_csc_enable(dpi, true);
> -		mtk_dpi_config_swap_input(dpi, true);
> +		if (dpi->conf->swap_input_support)
> +			mtk_dpi_config_swap_input(dpi, true);

In this case, we need swap input, but hardware does not support, so
just skip config hardware and everything works fine? Should print any
error message?

Regards,
CK

>  		mtk_dpi_config_channel_swap(dpi,
> MTK_DPI_OUT_CHANNEL_SWAP_RGB);
>  	} else {
>  		mtk_dpi_config_yuv422_enable(dpi, false);
>  		mtk_dpi_config_csc_enable(dpi, false);
> -		mtk_dpi_config_swap_input(dpi, false);
> +		if (dpi->conf->swap_input_support)
> +			mtk_dpi_config_swap_input(dpi, false);
>  		mtk_dpi_config_channel_swap(dpi,
> MTK_DPI_OUT_CHANNEL_SWAP_RGB);
>  	}
>  }
> @@ -808,6 +812,7 @@ static const struct mtk_dpi_conf mt8173_conf = {
>  	.output_fmts = mt8173_output_fmts,
>  	.num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
>  	.is_ck_de_pol = true,
> +	.swap_input_support = true,
>  	.limit = &mtk_dpi_limit,
>  };
>  
> @@ -819,6 +824,7 @@ static const struct mtk_dpi_conf mt2701_conf = {
>  	.output_fmts = mt8173_output_fmts,
>  	.num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
>  	.is_ck_de_pol = true,
> +	.swap_input_support = true,
>  	.limit = &mtk_dpi_limit,
>  };
>  
> @@ -829,6 +835,7 @@ static const struct mtk_dpi_conf mt8183_conf = {
>  	.output_fmts = mt8183_output_fmts,
>  	.num_output_fmts = ARRAY_SIZE(mt8183_output_fmts),
>  	.is_ck_de_pol = true,
> +	.swap_input_support = true,
>  	.limit = &mtk_dpi_limit,
>  };
>  
> @@ -839,6 +846,7 @@ static const struct mtk_dpi_conf mt8192_conf = {
>  	.output_fmts = mt8183_output_fmts,
>  	.num_output_fmts = ARRAY_SIZE(mt8183_output_fmts),
>  	.is_ck_de_pol = true,
> +	.swap_input_support = true,
>  	.limit = &mtk_dpi_limit,
>  };
>
Rex-BC Chen (陳柏辰) June 16, 2022, 10:36 a.m. UTC | #2 
On Tue, 2022-06-14 at 13:27 +0800, CK Hu wrote:
> Hi, Bo-Chen:
> 
> On Mon, 2022-06-13 at 14:48 +0800, Bo-Chen Chen wrote:
> > From: Guillaume Ranquet <granquet@baylibre.com>
> > 
> > The hardware design of dp_intf does not support input swap, so we
> > add
> > a bit of flexibility to support SoCs without swap_input support.
> > 
> > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
> > [Bo-Chen: Add modification reason in commit message.]
> > Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
> > Reviewed-by: AngeloGioacchino Del Regno <
> > angelogioacchino.delregno@collabora.com>
> > Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
> > ---
> >  drivers/gpu/drm/mediatek/mtk_dpi.c | 14 +++++++++++---
> >  1 file changed, 11 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c
> > b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > index 15218c1e8c11..c1438c744120 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > @@ -126,6 +126,7 @@ struct mtk_dpi_conf {
> >  	const u32 *output_fmts;
> >  	u32 num_output_fmts;
> >  	bool is_ck_de_pol;
> > +	bool swap_input_support;
> >  	const struct mtk_dpi_yc_limit *limit;
> >  };
> >  
> > @@ -378,18 +379,21 @@ static void
> > mtk_dpi_config_color_format(struct
> > mtk_dpi *dpi,
> >  	    (format == MTK_DPI_COLOR_FORMAT_YCBCR_444_FULL)) {
> >  		mtk_dpi_config_yuv422_enable(dpi, false);
> >  		mtk_dpi_config_csc_enable(dpi, true);
> > -		mtk_dpi_config_swap_input(dpi, false);
> > +		if (dpi->conf->swap_input_support)
> > +			mtk_dpi_config_swap_input(dpi, false);
> >  		mtk_dpi_config_channel_swap(dpi,
> > MTK_DPI_OUT_CHANNEL_SWAP_BGR);
> >  	} else if ((format == MTK_DPI_COLOR_FORMAT_YCBCR_422) ||
> >  		   (format == MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL)) {
> >  		mtk_dpi_config_yuv422_enable(dpi, true);
> >  		mtk_dpi_config_csc_enable(dpi, true);
> > -		mtk_dpi_config_swap_input(dpi, true);
> > +		if (dpi->conf->swap_input_support)
> > +			mtk_dpi_config_swap_input(dpi, true);
> 
> In this case, we need swap input, but hardware does not support, so
> just skip config hardware and everything works fine? Should print any
> error message?
> 
> Regards,
> CK
> 

ok, I will add warning message for this.

> >  		mtk_dpi_config_channel_swap(dpi,
> > MTK_DPI_OUT_CHANNEL_SWAP_RGB);
> >  	} else {
> >  		mtk_dpi_config_yuv422_enable(dpi, false);
> >  		mtk_dpi_config_csc_enable(dpi, false);
> > -		mtk_dpi_config_swap_input(dpi, false);
> > +		if (dpi->conf->swap_input_support)
> > +			mtk_dpi_config_swap_input(dpi, false);
> >  		mtk_dpi_config_channel_swap(dpi,
> > MTK_DPI_OUT_CHANNEL_SWAP_RGB);
> >  	}
> >  }
> > @@ -808,6 +812,7 @@ static const struct mtk_dpi_conf mt8173_conf =
> > {
> >  	.output_fmts = mt8173_output_fmts,
> >  	.num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
> >  	.is_ck_de_pol = true,
> > +	.swap_input_support = true,
> >  	.limit = &mtk_dpi_limit,
> >  };
> >  
> > @@ -819,6 +824,7 @@ static const struct mtk_dpi_conf mt2701_conf =
> > {
> >  	.output_fmts = mt8173_output_fmts,
> >  	.num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
> >  	.is_ck_de_pol = true,
> > +	.swap_input_support = true,
> >  	.limit = &mtk_dpi_limit,
> >  };
> >  
> > @@ -829,6 +835,7 @@ static const struct mtk_dpi_conf mt8183_conf =
> > {
> >  	.output_fmts = mt8183_output_fmts,
> >  	.num_output_fmts = ARRAY_SIZE(mt8183_output_fmts),
> >  	.is_ck_de_pol = true,
> > +	.swap_input_support = true,
> >  	.limit = &mtk_dpi_limit,
> >  };
> >  
> > @@ -839,6 +846,7 @@ static const struct mtk_dpi_conf mt8192_conf =
> > {
> >  	.output_fmts = mt8183_output_fmts,
> >  	.num_output_fmts = ARRAY_SIZE(mt8183_output_fmts),
> >  	.is_ck_de_pol = true,
> > +	.swap_input_support = true,
> >  	.limit = &mtk_dpi_limit,
> >  };
> >  
> 
>
diff mbox series

Patch

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 15218c1e8c11..c1438c744120 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -126,6 +126,7 @@  struct mtk_dpi_conf {
 	const u32 *output_fmts;
 	u32 num_output_fmts;
 	bool is_ck_de_pol;
+	bool swap_input_support;
 	const struct mtk_dpi_yc_limit *limit;
 };
 
@@ -378,18 +379,21 @@  static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
 	    (format == MTK_DPI_COLOR_FORMAT_YCBCR_444_FULL)) {
 		mtk_dpi_config_yuv422_enable(dpi, false);
 		mtk_dpi_config_csc_enable(dpi, true);
-		mtk_dpi_config_swap_input(dpi, false);
+		if (dpi->conf->swap_input_support)
+			mtk_dpi_config_swap_input(dpi, false);
 		mtk_dpi_config_channel_swap(dpi, MTK_DPI_OUT_CHANNEL_SWAP_BGR);
 	} else if ((format == MTK_DPI_COLOR_FORMAT_YCBCR_422) ||
 		   (format == MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL)) {
 		mtk_dpi_config_yuv422_enable(dpi, true);
 		mtk_dpi_config_csc_enable(dpi, true);
-		mtk_dpi_config_swap_input(dpi, true);
+		if (dpi->conf->swap_input_support)
+			mtk_dpi_config_swap_input(dpi, true);
 		mtk_dpi_config_channel_swap(dpi, MTK_DPI_OUT_CHANNEL_SWAP_RGB);
 	} else {
 		mtk_dpi_config_yuv422_enable(dpi, false);
 		mtk_dpi_config_csc_enable(dpi, false);
-		mtk_dpi_config_swap_input(dpi, false);
+		if (dpi->conf->swap_input_support)
+			mtk_dpi_config_swap_input(dpi, false);
 		mtk_dpi_config_channel_swap(dpi, MTK_DPI_OUT_CHANNEL_SWAP_RGB);
 	}
 }
@@ -808,6 +812,7 @@  static const struct mtk_dpi_conf mt8173_conf = {
 	.output_fmts = mt8173_output_fmts,
 	.num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
 	.is_ck_de_pol = true,
+	.swap_input_support = true,
 	.limit = &mtk_dpi_limit,
 };
 
@@ -819,6 +824,7 @@  static const struct mtk_dpi_conf mt2701_conf = {
 	.output_fmts = mt8173_output_fmts,
 	.num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
 	.is_ck_de_pol = true,
+	.swap_input_support = true,
 	.limit = &mtk_dpi_limit,
 };
 
@@ -829,6 +835,7 @@  static const struct mtk_dpi_conf mt8183_conf = {
 	.output_fmts = mt8183_output_fmts,
 	.num_output_fmts = ARRAY_SIZE(mt8183_output_fmts),
 	.is_ck_de_pol = true,
+	.swap_input_support = true,
 	.limit = &mtk_dpi_limit,
 };
 
@@ -839,6 +846,7 @@  static const struct mtk_dpi_conf mt8192_conf = {
 	.output_fmts = mt8183_output_fmts,
 	.num_output_fmts = ARRAY_SIZE(mt8183_output_fmts),
 	.is_ck_de_pol = true,
+	.swap_input_support = true,
 	.limit = &mtk_dpi_limit,
 };