| Message ID | 20220701121229.22756-2-allen-kh.cheng@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | enable cache for mt8186 SCP | expand |
On Fri, 2022-07-01 at 20:12 +0800, Allen-KH Cheng wrote: > This patch is for enableing cache in SCP. There is not enough space > on the SRAM of SCP. We need to run programs in DRAM. The DRAM power > and latency is much larger than SRAM, so cache is used to mitigate > the negative effects for performance. we set SCP registers for cache > size before loading SCP FW. (8KB+8KB) and also adjust ipi_buf_offset > in SRAM from 0x7bdb0 to 0x3BDB0 for enableing cache. > > This patch was tested on MediaTek mt8186. > > Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com> > Test scp boot and scp ipc ok. Tested-by: TingHan Shen <tinghan.shen@mediatek.com>
Il 01/07/22 14:12, Allen-KH Cheng ha scritto: > This patch is for enableing cache in SCP. There is not enough space > on the SRAM of SCP. We need to run programs in DRAM. The DRAM power > and latency is much larger than SRAM, so cache is used to mitigate > the negative effects for performance. we set SCP registers for cache > size before loading SCP FW. (8KB+8KB) and also adjust ipi_buf_offset > in SRAM from 0x7bdb0 to 0x3BDB0 for enableing cache. > > This patch was tested on MediaTek mt8186. > > Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
On Fri, Jul 01, 2022 at 08:12:29PM +0800, Allen-KH Cheng wrote: > This patch is for enableing cache in SCP. There is not enough space > on the SRAM of SCP. We need to run programs in DRAM. The DRAM power > and latency is much larger than SRAM, so cache is used to mitigate > the negative effects for performance. we set SCP registers for cache s/we/We > size before loading SCP FW. (8KB+8KB) and also adjust ipi_buf_offset > in SRAM from 0x7bdb0 to 0x3BDB0 for enableing cache. s/0x3BDB0/0x3bdb0 s/enableing/enabling > > This patch was tested on MediaTek mt8186. > If we keep the above statement it will be in the kernel's changelog for ever. Comments such as this one are usually found in the cover letter or between "---" lines after the SoB. > Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com> > --- > drivers/remoteproc/mtk_scp.c | 10 +++++++++- > 1 file changed, 9 insertions(+), 1 deletion(-) > > diff --git a/drivers/remoteproc/mtk_scp.c b/drivers/remoteproc/mtk_scp.c > index 47b2a40e1b4a..5b2ad789e720 100644 > --- a/drivers/remoteproc/mtk_scp.c > +++ b/drivers/remoteproc/mtk_scp.c > @@ -401,6 +401,14 @@ static int mt8186_scp_before_load(struct mtk_scp *scp) > writel(0x0, scp->reg_base + MT8186_SCP_L1_SRAM_PD_P1); > writel(0x0, scp->reg_base + MT8186_SCP_L1_SRAM_PD_p2); > > + /* > + * Set I-cache and D-cache size before loading SCP FW. > + * SCP SRAM logical address may change when cache size setting differs. > + */ > + writel(MT8183_SCP_CACHE_CON_WAYEN | MT8183_SCP_CACHESIZE_8KB, > + scp->reg_base + MT8183_SCP_CACHE_CON); > + writel(MT8183_SCP_CACHESIZE_8KB, scp->reg_base + MT8183_SCP_DCACHE_CON); > + > return 0; > } > > @@ -943,7 +951,7 @@ static const struct mtk_scp_of_data mt8186_of_data = { > .scp_da_to_va = mt8183_scp_da_to_va, > .host_to_scp_reg = MT8183_HOST_TO_SCP, > .host_to_scp_int_bit = MT8183_HOST_IPC_INT_BIT, > - .ipi_buf_offset = 0x7bdb0, > + .ipi_buf_offset = 0x3bdb0, > }; I have made the above corrections and applied this patch. Thanks, Mathieu > > static const struct mtk_scp_of_data mt8192_of_data = { > -- > 2.18.0 >
diff --git a/drivers/remoteproc/mtk_scp.c b/drivers/remoteproc/mtk_scp.c index 47b2a40e1b4a..5b2ad789e720 100644 --- a/drivers/remoteproc/mtk_scp.c +++ b/drivers/remoteproc/mtk_scp.c @@ -401,6 +401,14 @@ static int mt8186_scp_before_load(struct mtk_scp *scp) writel(0x0, scp->reg_base + MT8186_SCP_L1_SRAM_PD_P1); writel(0x0, scp->reg_base + MT8186_SCP_L1_SRAM_PD_p2); + /* + * Set I-cache and D-cache size before loading SCP FW. + * SCP SRAM logical address may change when cache size setting differs. + */ + writel(MT8183_SCP_CACHE_CON_WAYEN | MT8183_SCP_CACHESIZE_8KB, + scp->reg_base + MT8183_SCP_CACHE_CON); + writel(MT8183_SCP_CACHESIZE_8KB, scp->reg_base + MT8183_SCP_DCACHE_CON); + return 0; } @@ -943,7 +951,7 @@ static const struct mtk_scp_of_data mt8186_of_data = { .scp_da_to_va = mt8183_scp_da_to_va, .host_to_scp_reg = MT8183_HOST_TO_SCP, .host_to_scp_int_bit = MT8183_HOST_IPC_INT_BIT, - .ipi_buf_offset = 0x7bdb0, + .ipi_buf_offset = 0x3bdb0, }; static const struct mtk_scp_of_data mt8192_of_data = {
This patch is for enableing cache in SCP. There is not enough space on the SRAM of SCP. We need to run programs in DRAM. The DRAM power and latency is much larger than SRAM, so cache is used to mitigate the negative effects for performance. we set SCP registers for cache size before loading SCP FW. (8KB+8KB) and also adjust ipi_buf_offset in SRAM from 0x7bdb0 to 0x3BDB0 for enableing cache. This patch was tested on MediaTek mt8186. Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com> --- drivers/remoteproc/mtk_scp.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)