@@ -9,7 +9,7 @@ MT6323 PMIC hardware.
For MT6323 MFD bindings see:
Documentation/devicetree/bindings/mfd/mt6397.txt
For MediaTek PMIC wrapper bindings see:
-Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
+Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml
Required properties:
- compatible : Must be "mediatek,mt6323-led"
@@ -13,7 +13,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules:
It is interfaced to host controller using SPI interface by a proprietary hardware
called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap.
See the following for pwarp node definitions:
-../soc/mediatek/pwrap.txt
+../soc/mediatek/mediatek,pwrap.yaml
This document describes the binding for MFD device and its sub module.
new file mode 100644
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/mediatek/mediatek,pwrap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek PMIC Wrapper
+
+maintainers:
+ - Flora Fu <flora.fu@mediatek.com>
+ - Alexandre Mergnat <amergnat@baylibre.com>
+
+description:
+ On MediaTek SoCs the PMIC is connected via SPI. The SPI master interface
+ is not directly visible to the CPU, but only through the PMIC wrapper
+ inside the SoC. The communication between the SoC and the PMIC can
+ optionally be encrypted. Also a non standard Dual IO SPI mode can be
+ used to increase speed.
+
+ IP Pairing
+
+ On MT8135 the pins of some SoC internal peripherals can be on the PMIC.
+ The signals of these pins are routed over the SPI bus using the pwrap
+ bridge. In the binding description below the properties needed for bridging
+ are marked with "IP Pairing". These are optional on SoCs which do not support
+ IP Pairing
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - mediatek,mt2701-pwrap
+ - mediatek,mt6765-pwrap
+ - mediatek,mt6779-pwrap
+ - mediatek,mt6797-pwrap
+ - mediatek,mt6873-pwrap
+ - mediatek,mt7622-pwrap
+ - mediatek,mt8135-pwrap
+ - mediatek,mt8173-pwrap
+ - mediatek,mt8183-pwrap
+ - mediatek,mt8186-pwrap
+ - mediatek,mt8188-pwrap
+ - mediatek,mt8195-pwrap
+ - mediatek,mt8365-pwrap
+ - mediatek,mt8516-pwrap
+ - items:
+ - enum:
+ - mediatek,mt8186-pwrap
+ - mediatek,mt8195-pwrap
+ - const: syscon
+
+ reg:
+ minItems: 1
+ items:
+ - description: PMIC wrapper registers
+ - description: IP pairing registers
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: pwrap
+ - const: pwrap-bridge
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 2
+ items:
+ - description: SPI bus clock
+ - description: Main module clock
+ - description: System module clock
+ - description: Timer module clock
+
+ clock-names:
+ minItems: 2
+ items:
+ - const: spi
+ - const: wrap
+ - const: sys
+ - const: tmr
+
+ resets:
+ minItems: 1
+ items:
+ - description: PMIC wrapper reset
+ - description: IP pairing reset
+
+ reset-names:
+ minItems: 1
+ items:
+ - const: pwrap
+ - const: pwrap-bridge
+
+ pmic:
+ type: object
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - clocks
+ - clock-names
+
+dependentRequired:
+ resets: [reset-names]
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: mediatek,mt8365-pwrap
+ then:
+ properties:
+ clocks:
+ minItems: 4
+
+ clock-names:
+ minItems: 4
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/reset/mt8135-resets.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ pwrap@1000f000 {
+ compatible = "mediatek,mt8135-pwrap";
+ reg = <0 0x1000f000 0 0x1000>,
+ <0 0x11017000 0 0x1000>;
+ reg-names = "pwrap", "pwrap-bridge";
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk26m>, <&clk26m>;
+ clock-names = "spi", "wrap";
+ resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>,
+ <&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
+ reset-names = "pwrap", "pwrap-bridge";
+ };
+ };
deleted file mode 100644
@@ -1,75 +0,0 @@
-MediaTek PMIC Wrapper Driver
-
-This document describes the binding for the MediaTek PMIC wrapper.
-
-On MediaTek SoCs the PMIC is connected via SPI. The SPI master interface
-is not directly visible to the CPU, but only through the PMIC wrapper
-inside the SoC. The communication between the SoC and the PMIC can
-optionally be encrypted. Also a non standard Dual IO SPI mode can be
-used to increase speed.
-
-IP Pairing
-
-on MT8135 the pins of some SoC internal peripherals can be on the PMIC.
-The signals of these pins are routed over the SPI bus using the pwrap
-bridge. In the binding description below the properties needed for bridging
-are marked with "IP Pairing". These are optional on SoCs which do not support
-IP Pairing
-
-Required properties in pwrap device node.
-- compatible:
- "mediatek,mt2701-pwrap" for MT2701/7623 SoCs
- "mediatek,mt6765-pwrap" for MT6765 SoCs
- "mediatek,mt6779-pwrap" for MT6779 SoCs
- "mediatek,mt6797-pwrap" for MT6797 SoCs
- "mediatek,mt6873-pwrap" for MT6873/8192 SoCs
- "mediatek,mt7622-pwrap" for MT7622 SoCs
- "mediatek,mt8135-pwrap" for MT8135 SoCs
- "mediatek,mt8173-pwrap" for MT8173 SoCs
- "mediatek,mt8183-pwrap" for MT8183 SoCs
- "mediatek,mt8186-pwrap" for MT8186 SoCs
- "mediatek,mt8188-pwrap", "mediatek,mt8195-pwrap" for MT8188 SoCs
- "mediatek,mt8195-pwrap" for MT8195 SoCs
- "mediatek,mt8365-pwrap" for MT8365 SoCs
- "mediatek,mt8516-pwrap" for MT8516 SoCs
-- interrupts: IRQ for pwrap in SOC
-- reg-names: "pwrap" is required; "pwrap-bridge" is optional.
- "pwrap": Main registers base
- "pwrap-bridge": bridge base (IP Pairing)
-- reg: Must contain an entry for each entry in reg-names.
-- clock-names: Must include the following entries:
- "spi": SPI bus clock
- "wrap": Main module clock
- "sys": Optional system module clock
- "tmr": Optional timer module clock
-- clocks: Must contain an entry for each entry in clock-names.
-
-Optional properities:
-- reset-names: Some SoCs include the following entries:
- "pwrap"
- "pwrap-bridge" (IP Pairing)
-- resets: Must contain an entry for each entry in reset-names.
-- pmic: Using either MediaTek PMIC MFD as the child device of pwrap
- See the following for child node definitions:
- Documentation/devicetree/bindings/mfd/mt6397.txt
- or the regulator-only device as the child device of pwrap, such as MT6380.
- See the following definitions for such kinds of devices.
- Documentation/devicetree/bindings/regulator/mt6380-regulator.txt
-
-Example:
- pwrap: pwrap@1000f000 {
- compatible = "mediatek,mt8135-pwrap";
- reg = <0 0x1000f000 0 0x1000>,
- <0 0x11017000 0 0x1000>;
- reg-names = "pwrap", "pwrap-bridge";
- interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
- resets = <&infracfg MT8135_INFRA_PMIC_WRAP_RST>,
- <&pericfg MT8135_PERI_PWRAP_BRIDGE_SW_RST>;
- reset-names = "pwrap", "pwrap-bridge";
- clocks = <&clk26m>, <&clk26m>;
- clock-names = "spi", "wrap";
-
- pmic {
- compatible = "mediatek,mt6397";
- };
- };