diff mbox series

[9/9] arm64: dts: mediatek: mt8186: Add display nodes

Message ID 20230111123711.32020-10-allen-kh.cheng@mediatek.com (mailing list archive)
State New, archived
Headers show
Series Add and update some driver nodes for MT8186 SoC | expand

Commit Message

Allen-KH Cheng Jan. 11, 2023, 12:37 p.m. UTC
Add display nodes and GCE info for MT8186 SoC. Also, add GCE
(Global Command Engine) properties to the display nodes in order to
enable the usage of the CMDQ (Command Queue), which is required for
operating the display.

Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8186.dtsi | 128 +++++++++++++++++++++++
 1 file changed, 128 insertions(+)

Comments

Chen-Yu Tsai Jan. 12, 2023, 10 a.m. UTC | #1
Hi,

On Wed, Jan 11, 2023 at 8:37 PM Allen-KH Cheng
<allen-kh.cheng@mediatek.com> wrote:
>
> Add display nodes and GCE info for MT8186 SoC. Also, add GCE
> (Global Command Engine) properties to the display nodes in order to
> enable the usage of the CMDQ (Command Queue), which is required for
> operating the display.
>
> Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
> ---
>  arch/arm64/boot/dts/mediatek/mt8186.dtsi | 128 +++++++++++++++++++++++
>  1 file changed, 128 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
> index eab30ab01572..8670d37970ef 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
> @@ -5,6 +5,7 @@
>   */
>  /dts-v1/;
>  #include <dt-bindings/clock/mt8186-clk.h>
> +#include <dt-bindings/gce/mt8186-gce.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/interrupt-controller/irq.h>
>  #include <dt-bindings/memory/mt8186-memory-port.h>
> @@ -632,6 +633,15 @@
>                         clocks = <&clk13m>;
>                 };
>
> +               gce: mailbox@1022c000 {
> +                       compatible = "mediatek,mt8186-gce";
> +                       reg = <0 0X1022c000 0 0x4000>;
> +                       interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
> +                       #mbox-cells = <2>;
> +                       clocks = <&infracfg_ao CLK_INFRA_AO_GCE>;
> +                       clock-names = "gce";
> +               };
> +
>                 scp: scp@10500000 {
>                         compatible = "mediatek,mt8186-scp";
>                         reg = <0 0x10500000 0 0x40000>,
> @@ -1197,6 +1207,20 @@
>                         reg = <0 0x14000000 0 0x1000>;
>                         #clock-cells = <1>;
>                         #reset-cells = <1>;
> +                       mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
> +                                <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
> +                       mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
> +               };
> +
> +               mutex: mutex@14001000 {
> +                       compatible = "mediatek,mt8186-disp-mutex";
> +                       reg = <0 0x14001000 0 0x1000>;
> +                       clocks = <&mmsys CLK_MM_DISP_MUTEX0>;
> +                       interrupts = <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH 0>;
> +                       mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
> +                       mediatek,gce-events = <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_0>,
> +                                             <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_1>;
> +                       power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
>                 };
>
>                 smi_common: smi@14002000 {
> @@ -1230,6 +1254,49 @@
>                         power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
>                 };
>
> +               ovl0: ovl@14005000 {

If there's only one instance, you could drop the trailing zero. Same
for all the other nodes.

> +                       compatible = "mediatek,mt8186-disp-ovl",
> +                                    "mediatek,mt8192-disp-ovl";
> +                       reg = <0 0x14005000 0 0x1000>;
> +                       clocks = <&mmsys CLK_MM_DISP_OVL0>;
> +                       interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH 0>;
> +                       iommus = <&iommu_mm IOMMU_PORT_L0_OVL_RDMA0>;
> +                       mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
> +                       power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
> +               };
> +
> +               ovl0_2l: ovl@14006000 {

I think this should be "ovl_2l0" or "ovl_2l" instead?

> +                       compatible = "mediatek,mt8186-disp-ovl-2l",
> +                                    "mediatek,mt8192-disp-ovl-2l";
> +                       reg = <0 0x14006000 0 0x1000>;
> +                       power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
> +                       clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
> +                       interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH 0>;
> +                       iommus = <&iommu_mm IOMMU_PORT_L1_OVL_2L_RDMA0>;
> +                       mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>;
> +               };

Also, this patch is missing the aliases for ovl* and rdma*. Without them
the display driver doesn't properly detect the second pipeline, and only
one CRTC is generated.

ChenYu
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt8186.dtsi b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
index eab30ab01572..8670d37970ef 100644
--- a/arch/arm64/boot/dts/mediatek/mt8186.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8186.dtsi
@@ -5,6 +5,7 @@ 
  */
 /dts-v1/;
 #include <dt-bindings/clock/mt8186-clk.h>
+#include <dt-bindings/gce/mt8186-gce.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/memory/mt8186-memory-port.h>
@@ -632,6 +633,15 @@ 
 			clocks = <&clk13m>;
 		};
 
+		gce: mailbox@1022c000 {
+			compatible = "mediatek,mt8186-gce";
+			reg = <0 0X1022c000 0 0x4000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+			#mbox-cells = <2>;
+			clocks = <&infracfg_ao CLK_INFRA_AO_GCE>;
+			clock-names = "gce";
+		};
+
 		scp: scp@10500000 {
 			compatible = "mediatek,mt8186-scp";
 			reg = <0 0x10500000 0 0x40000>,
@@ -1197,6 +1207,20 @@ 
 			reg = <0 0x14000000 0 0x1000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
+			mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
+				 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
+		};
+
+		mutex: mutex@14001000 {
+			compatible = "mediatek,mt8186-disp-mutex";
+			reg = <0 0x14001000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_MUTEX0>;
+			interrupts = <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
+			mediatek,gce-events = <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_0>,
+					      <CMDQ_EVENT_DISP_STREAM_DONE_ENG_EVENT_1>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
 		};
 
 		smi_common: smi@14002000 {
@@ -1230,6 +1254,49 @@ 
 			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
 		};
 
+		ovl0: ovl@14005000 {
+			compatible = "mediatek,mt8186-disp-ovl",
+				     "mediatek,mt8192-disp-ovl";
+			reg = <0 0x14005000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_OVL0>;
+			interrupts = <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&iommu_mm IOMMU_PORT_L0_OVL_RDMA0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x5000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		ovl0_2l: ovl@14006000 {
+			compatible = "mediatek,mt8186-disp-ovl-2l",
+				     "mediatek,mt8192-disp-ovl-2l";
+			reg = <0 0x14006000 0 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+			clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
+			interrupts = <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&iommu_mm IOMMU_PORT_L1_OVL_2L_RDMA0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x6000 0x1000>;
+		};
+
+		rdma0: rdma@14007000 {
+			compatible = "mediatek,mt8186-disp-rdma",
+				     "mediatek,mt8183-disp-rdma";
+			reg = <0 0x14007000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA0>;
+			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&iommu_mm IOMMU_PORT_L1_DISP_RDMA0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x7000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		color0: color@14009000 {
+			compatible = "mediatek,mt8186-disp-color",
+				     "mediatek,mt8173-disp-color";
+			reg = <0 0x14009000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_COLOR0>;
+			interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
 		dpi0: dpi@1400a000 {
 			compatible = "mediatek,mt8186-dpi";
 			reg = <0 0x1400a000 0 0x1000>;
@@ -1247,6 +1314,56 @@ 
 			};
 		};
 
+		ccorr0: ccorr@1400b000 {
+			compatible = "mediatek,mt8186-disp-ccorr",
+				     "mediatek,mt8192-disp-ccorr";
+			reg = <0 0x1400b000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_CCORR0>;
+			interrupts = <GIC_SPI 302 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		aal0: aal@1400c000 {
+			compatible = "mediatek,mt8186-disp-aal",
+				     "mediatek,mt8183-disp-aal";
+			reg = <0 0x1400c000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_AAL0>;
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		gamma0: gamma@1400d000 {
+			compatible = "mediatek,mt8186-disp-gamma",
+				     "mediatek,mt8183-disp-gamma";
+			reg = <0 0x1400d000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_GAMMA0>;
+			interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xd000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		postmask0: postmask@1400e000 {
+			compatible = "mediatek,mt8186-disp-postmask",
+				     "mediatek,mt8192-disp-postmask";
+			reg = <0 0x1400e000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_POSTMASK0>;
+			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
+		dither0: dither@1400f000 {
+			compatible = "mediatek,mt8186-disp-dither",
+				     "mediatek,mt8183-disp-dither";
+			reg = <0 0x1400f000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_DITHER0>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH 0>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
 		dsi0: dsi@14013000 {
 			compatible = "mediatek,mt8186-dsi";
 			reg = <0 0x14013000 0 0x1000>;
@@ -1280,6 +1397,17 @@ 
 			#iommu-cells = <1>;
 		};
 
+		rdma1: rdma@1401f000 {
+			compatible = "mediatek,mt8186-disp-rdma",
+				     "mediatek,mt8183-disp-rdma";
+			reg = <0 0x1401f000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_DISP_RDMA1>;
+			interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH 0>;
+			iommus = <&iommu_mm IOMMU_PORT_L1_DISP_RDMA1>;
+			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0xf000 0x1000>;
+			power-domains = <&spm MT8186_POWER_DOMAIN_DIS>;
+		};
+
 		wpesys: clock-controller@14020000 {
 			compatible = "mediatek,mt8186-wpesys";
 			reg = <0 0x14020000 0 0x1000>;