| Message ID | 20230203-evk-board-support-v5-9-1883c1b405ad@baylibre.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Improve the MT8365 SoC and EVK board support | expand |
+ To: Catalin Marinas <catalin.marinas@arm.com> + To: Will Deacon <will@kernel.org> Sorry for the noise. Regards, Alexandre Le ven. 7 avr. 2023 à 14:59, Alexandre Mergnat <amergnat@baylibre.com> a écrit : > > - Enable "vibr" and "vsim2" regulators to power the ethernet chip. > > Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> > --- > arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 57 +++++++++++++++++++++++++++++ > 1 file changed, 57 insertions(+) > > diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts > index 9760f181eb34..431078f8670e 100644 > --- a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts > +++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts > @@ -88,6 +88,28 @@ optee_reserved: optee@43200000 { > }; > }; > > +ðernet { > + pinctrl-0 = <ðernet_pins>; > + pinctrl-names = "default"; > + phy-handle = <ð_phy>; > + phy-mode = "rmii"; > + /* > + * Ethernet and HDMI (DSI0) are sharing pins. > + * Only one can be enabled at a time and require the physical switch > + * SW2101 to be set on LAN position > + */ > + status = "disabled"; > + > + mdio { > + #address-cells = <1>; > + #size-cells = <0>; > + > + eth_phy: ethernet-phy@0 { > + reg = <0>; > + }; > + }; > +}; > + > &i2c0 { > clock-frequency = <100000>; > pinctrl-0 = <&i2c0_pins>; > @@ -137,12 +159,47 @@ &mt6357_pmic { > #interrupt-cells = <2>; > }; > > +/* Needed by analog switch (multiplexer), HDMI and ethernet */ > +&mt6357_vibr_reg { > + regulator-always-on; > +}; > + > /* Needed by MSDC1 */ > &mt6357_vmc_reg { > regulator-always-on; > }; > > +/* Needed by ethernet */ > +&mt6357_vsim2_reg { > + regulator-always-on; > +}; > + > &pio { > + ethernet_pins: ethernet-pins { > + phy_reset_pins { > + pinmux = <MT8365_PIN_133_TDM_TX_DATA1__FUNC_GPIO133>; > + }; > + > + rmii_pins { > + pinmux = <MT8365_PIN_0_GPIO0__FUNC_EXT_TXD0>, > + <MT8365_PIN_1_GPIO1__FUNC_EXT_TXD1>, > + <MT8365_PIN_2_GPIO2__FUNC_EXT_TXD2>, > + <MT8365_PIN_3_GPIO3__FUNC_EXT_TXD3>, > + <MT8365_PIN_4_GPIO4__FUNC_EXT_TXC>, > + <MT8365_PIN_5_GPIO5__FUNC_EXT_RXER>, > + <MT8365_PIN_6_GPIO6__FUNC_EXT_RXC>, > + <MT8365_PIN_7_GPIO7__FUNC_EXT_RXDV>, > + <MT8365_PIN_8_GPIO8__FUNC_EXT_RXD0>, > + <MT8365_PIN_9_GPIO9__FUNC_EXT_RXD1>, > + <MT8365_PIN_10_GPIO10__FUNC_EXT_RXD2>, > + <MT8365_PIN_11_GPIO11__FUNC_EXT_RXD3>, > + <MT8365_PIN_12_GPIO12__FUNC_EXT_TXEN>, > + <MT8365_PIN_13_GPIO13__FUNC_EXT_COL>, > + <MT8365_PIN_14_GPIO14__FUNC_EXT_MDIO>, > + <MT8365_PIN_15_GPIO15__FUNC_EXT_MDC>; > + }; > + }; > + > gpio_keys: gpio-keys-pins { > pins { > pinmux = <MT8365_PIN_24_KPCOL0__FUNC_KPCOL0>; > > -- > 2.25.1 >
diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts index 9760f181eb34..431078f8670e 100644 --- a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts +++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts @@ -88,6 +88,28 @@ optee_reserved: optee@43200000 { }; }; +ðernet { + pinctrl-0 = <ðernet_pins>; + pinctrl-names = "default"; + phy-handle = <ð_phy>; + phy-mode = "rmii"; + /* + * Ethernet and HDMI (DSI0) are sharing pins. + * Only one can be enabled at a time and require the physical switch + * SW2101 to be set on LAN position + */ + status = "disabled"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + eth_phy: ethernet-phy@0 { + reg = <0>; + }; + }; +}; + &i2c0 { clock-frequency = <100000>; pinctrl-0 = <&i2c0_pins>; @@ -137,12 +159,47 @@ &mt6357_pmic { #interrupt-cells = <2>; }; +/* Needed by analog switch (multiplexer), HDMI and ethernet */ +&mt6357_vibr_reg { + regulator-always-on; +}; + /* Needed by MSDC1 */ &mt6357_vmc_reg { regulator-always-on; }; +/* Needed by ethernet */ +&mt6357_vsim2_reg { + regulator-always-on; +}; + &pio { + ethernet_pins: ethernet-pins { + phy_reset_pins { + pinmux = <MT8365_PIN_133_TDM_TX_DATA1__FUNC_GPIO133>; + }; + + rmii_pins { + pinmux = <MT8365_PIN_0_GPIO0__FUNC_EXT_TXD0>, + <MT8365_PIN_1_GPIO1__FUNC_EXT_TXD1>, + <MT8365_PIN_2_GPIO2__FUNC_EXT_TXD2>, + <MT8365_PIN_3_GPIO3__FUNC_EXT_TXD3>, + <MT8365_PIN_4_GPIO4__FUNC_EXT_TXC>, + <MT8365_PIN_5_GPIO5__FUNC_EXT_RXER>, + <MT8365_PIN_6_GPIO6__FUNC_EXT_RXC>, + <MT8365_PIN_7_GPIO7__FUNC_EXT_RXDV>, + <MT8365_PIN_8_GPIO8__FUNC_EXT_RXD0>, + <MT8365_PIN_9_GPIO9__FUNC_EXT_RXD1>, + <MT8365_PIN_10_GPIO10__FUNC_EXT_RXD2>, + <MT8365_PIN_11_GPIO11__FUNC_EXT_RXD3>, + <MT8365_PIN_12_GPIO12__FUNC_EXT_TXEN>, + <MT8365_PIN_13_GPIO13__FUNC_EXT_COL>, + <MT8365_PIN_14_GPIO14__FUNC_EXT_MDIO>, + <MT8365_PIN_15_GPIO15__FUNC_EXT_MDC>; + }; + }; + gpio_keys: gpio-keys-pins { pins { pinmux = <MT8365_PIN_24_KPCOL0__FUNC_KPCOL0>;
- Enable "vibr" and "vsim2" regulators to power the ethernet chip. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> --- arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 57 +++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+)