From patchwork Fri Mar 17 21:30:05 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?b?QXLEsW7DpyDDnE5BTA==?= X-Patchwork-Id: 13179542 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 1536BC74A5B for ; Fri, 17 Mar 2023 22:46:12 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender:Cc:List-Subscribe: List-Help:List-Post:List-Archive:List-Unsubscribe:List-Id: Content-Transfer-Encoding:Content-Type:MIME-Version:References:In-Reply-To: Message-Id:Date:Subject:To:From:Reply-To:Content-ID:Content-Description: Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID: List-Owner; bh=C+Cbog22+6j+VeMCe1DOeI/RCKtalEeyJ2KLFOjeE24=; b=K5p/gU4ibxbOo2 rX3SavEhpqQlyOOpJoDTkHlbq6azzcITGsaeqCiTfpoxYU0R/lT4/i3r+SkjcDYrsPUezCrKPtmN0 ij9nhBNNsuBUkVDA7HhZdLv05UtuUZaxoJV7eWc+HhM/ULzFL++S/EmXOpvXwjAAcIjrtR39Bf/Dc Bo3ZYLe1XS4HUBtBWpkEfCPLHOj1xvVN40BOZYNwviz2Lu3d6HNmQGFWZular2Wg6uOANj5caO/DN SWy0Wcsf8Lv/L3Ui6sAuClT+pWrzBlFtTRAOA7l4pzXB55aZBuSAY4k36oTbEnhK6rQ0/QvXP6/0A Q0QpKiyV3gz8eoag55Wg==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.96 #2 (Red Hat Linux)) id 1pdIpn-003bGm-0f; Fri, 17 Mar 2023 22:46:03 +0000 Received: from desiato.infradead.org ([2001:8b0:10b:1:d65d:64ff:fe57:4e05]) by bombadil.infradead.org with esmtps (Exim 4.96 #2 (Red Hat Linux)) id 1pdIpj-003bEs-1c; Fri, 17 Mar 2023 22:45:59 +0000 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=infradead.org; s=desiato.20200630; h=Content-Transfer-Encoding:Content-Type :MIME-Version:References:In-Reply-To:Message-Id:Date:Subject:Cc:To:From: Sender:Reply-To:Content-ID:Content-Description; bh=C+Cbog22+6j+VeMCe1DOeI/RCKtalEeyJ2KLFOjeE24=; b=p1lBeyED5Kww+DxC9g8sOChhdx Yg7ai3aVCtgx9ew+MLCiUZ46asFu2bt85y+1m0fn44DB+jSAtrbpYP+QvPjN82gozCg0usHUbq4cd 4EsupW/lrNaKb8BS9W9oqeTyjVcl/1MWouIRxAC4o/AIeZxFYAEiX+1Ove8g7mc7y+mDMqEBruiC9 UBq6nmucEeumpDAyZgW9IZv+iJfVMJmRSHXopZB+TbucN76nQ5XUYISD5pwMZdAgxmGpZtdgOX+4w fcpHGkW5wtBqG1RhH00T5kJm2SzpFnO8dHKWJJkk6h3VV8FEPVn1sYeP7tQT560u7ElyQWPbDWPQN RoJinwZA==; Received: from mail-ed1-x532.google.com ([2a00:1450:4864:20::532]) by desiato.infradead.org with esmtps (Exim 4.96 #2 (Red Hat Linux)) id 1pdHf9-002vW8-08; Fri, 17 Mar 2023 21:31:03 +0000 Received: by mail-ed1-x532.google.com with SMTP id w9so25497982edc.3; Fri, 17 Mar 2023 14:30:56 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; t=1679088655; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=C+Cbog22+6j+VeMCe1DOeI/RCKtalEeyJ2KLFOjeE24=; b=BximcnbpdSRuuS88COyoeeqbC3tBRXhEqTRpHldbjH1ZfoA5lN76Xzp7No9fEPLJjz ZBYvjHE7Auk+uuh1dipfWUyZnKWpOEXztr/8vOtoGKxgKRXuawprcXJS2MQWoOBb4989 fptJleglrrnq51uBcXZdt6UehL7cViLqcvbuBtb4rJ4bDxeBqe5juT5A9qyMQfuvcTSl 21WJV90azhdfEh3UgM3xvdRIPSPYCbYMJuIb8O4/3ECdCU0OQl01QqBXOjqMySoenhyW vjLOD0ZYDqNWeth6gPubQywwmtYmJkJnzk/XpAZRxME9aaKT4l6M188Ri6iyxJr3M/tj CK6w== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; t=1679088655; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=C+Cbog22+6j+VeMCe1DOeI/RCKtalEeyJ2KLFOjeE24=; b=ItXmJvD7o7zp/OYw+V6g1UVDzhA2GEP4xS+BbeQYQDPYbfbY0VRRqU5AXfO8dULcwK BLM31e7+o4JdvZLAhYHlPcJ1tsKl0AWAfZXJGt7if/E7UiMsjxJBRC2ZM2XL81lch9Fy xLH9UwR22sk5GEyg2bJsTKDgIF75rFMsrfj8vCxwowAT2YElAj1SNRgzttqtQS9RAhnr p69mkqJDK9zQYRC2uyp7KULwScZN2jb7/LTZUBWbVcL26PTF3zkTMLnj3a4HPTZ2rgqx uwsoQwxmTFkXh5m98IMZJRiJhQCfd9gjPpxTWh+vQH1FNEc23a5u68h3OoLwQfeS6PR0 v9GQ== X-Gm-Message-State: AO0yUKWEXDI4mZHEoTU4FHGWcF0D6ta7cps6ag3ifogmwyp6+T2QRAfm cjrLZvu2Tlx6Nqopa9/mwgE= X-Google-Smtp-Source: AK7set+IepPc2a8TznbC1ZVXswq+bHqZM81zMzV0a40YrvcG32iL6GZZ686SKAmBy6MZlwSfxV+95A== X-Received: by 2002:a17:906:5645:b0:932:e9c7:c32 with SMTP id v5-20020a170906564500b00932e9c70c32mr853224ejr.59.1679088654459; Fri, 17 Mar 2023 14:30:54 -0700 (PDT) Received: from arinc9-PC.lan ([149.91.1.15]) by smtp.gmail.com with ESMTPSA id v19-20020a17090651d300b0092b86d41dbasm1404683ejk.114.2023.03.17.14.30.51 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 17 Mar 2023 14:30:54 -0700 (PDT) From: arinc9.unal@gmail.com X-Google-Original-From: arinc.unal@arinc9.com To: Linus Walleij , Rob Herring , Krzysztof Kozlowski Subject: [PATCH v3 15/21] dt-bindings: pinctrl: {mediatek,ralink}: fix formatting Date: Sat, 18 Mar 2023 00:30:05 +0300 Message-Id: <20230317213011.13656-16-arinc.unal@arinc9.com> X-Mailer: git-send-email 2.37.2 In-Reply-To: <20230317213011.13656-1-arinc.unal@arinc9.com> References: <20230317213011.13656-1-arinc.unal@arinc9.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20230317_213059_319429_6E9C7AFB X-CRM114-Status: GOOD ( 17.58 ) X-BeenThere: linux-mediatek@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: linux-kernel@vger.kernel.org, Daniel Santos , erkin.bozoglu@xeront.com, Rob Herring , =?utf-8?q?Bernhard?= =?utf-8?q?_Rosenkr=C3=A4nzer?= , Sergio Paracuellos , linux-mips@vger.kernel.org, devicetree@vger.kernel.org, Landen Chao , Sean Wang , Andy Teng , Hui Liu , Luiz Angelo Daros de Luca , DENG Qingfang , linux-mediatek@lists.infradead.org, Matthias Brugger , linux-arm-kernel@lists.infradead.org, Del Regno , =?utf-8?b?QXLEsW7DpyA=?= =?utf-8?b?w5xOQUw=?= , Zhiyong Tao , linux-gpio@vger.kernel.org, Sean Wang , Daniel Golle , William Dean Sender: "Linux-mediatek" Errors-To: linux-mediatek-bounces+linux-mediatek=archiver.kernel.org@lists.infradead.org From: Arınç ÜNAL Change the style of description properties to plain style where there's no need to preserve the line endings, and vice versa. Fix capitalisation and indentation. Fit the schemas to 80 columns for each line. Signed-off-by: Arınç ÜNAL Reviewed-by: Rob Herring Reviewed-by: AngeloGioacchino Del Regno --- .../pinctrl/mediatek,mt65xx-pinctrl.yaml | 22 +++--- .../pinctrl/mediatek,mt6779-pinctrl.yaml | 33 +++++---- .../pinctrl/mediatek,mt6795-pinctrl.yaml | 41 +++++----- .../pinctrl/mediatek,mt7620-pinctrl.yaml | 2 +- .../pinctrl/mediatek,mt7621-pinctrl.yaml | 2 +- .../pinctrl/mediatek,mt7622-pinctrl.yaml | 26 +++---- .../pinctrl/mediatek,mt7981-pinctrl.yaml | 33 +++++---- .../pinctrl/mediatek,mt7986-pinctrl.yaml | 68 ++++++++--------- .../pinctrl/mediatek,mt8183-pinctrl.yaml | 26 ++++--- .../pinctrl/mediatek,mt8186-pinctrl.yaml | 47 ++++++------ .../pinctrl/mediatek,mt8188-pinctrl.yaml | 74 ++++++++++--------- .../pinctrl/mediatek,mt8192-pinctrl.yaml | 47 ++++++------ .../pinctrl/mediatek,mt8195-pinctrl.yaml | 41 +++++----- .../pinctrl/mediatek,mt8365-pinctrl.yaml | 28 +++---- .../pinctrl/ralink,rt2880-pinctrl.yaml | 2 +- .../pinctrl/ralink,rt305x-pinctrl.yaml | 2 +- .../pinctrl/ralink,rt3883-pinctrl.yaml | 2 +- 17 files changed, 258 insertions(+), 238 deletions(-) diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml index 77b1b52f5799..5e80621800a9 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml @@ -9,7 +9,7 @@ title: MediaTek MT65xx Pin Controller maintainers: - Sean Wang -description: |+ +description: The MediaTek's MT65xx Pin controller is used to control SoC pins. properties: @@ -30,7 +30,7 @@ properties: pins-are-numbered: $ref: /schemas/types.yaml#/definitions/flag - description: | + description: Specify the subnodes are using numbered pinmux to specify pins. (UNUSED) deprecated: true @@ -38,10 +38,10 @@ properties: "#gpio-cells": const: 2 - description: | - Number of cells in GPIO specifier. Since the generic GPIO - binding is used, the amount of cells must be specified as 2. See the below - mentioned gpio binding representation for description of particular cells. + description: + Number of cells in GPIO specifier. Since the generic GPIO binding is used, + the amount of cells must be specified as 2. See the below mentioned gpio + binding representation for description of particular cells. mediatek,pctl-regmap: $ref: /schemas/types.yaml#/definitions/phandle-array @@ -49,7 +49,7 @@ properties: maxItems: 1 minItems: 1 maxItems: 2 - description: | + description: Should be phandles of the syscfg node. interrupt-controller: true @@ -77,7 +77,7 @@ patternProperties: '(^pins|pins?$)': type: object additionalProperties: false - description: | + description: A pinctrl node should contain at least one subnodes representing the pinctrl groups available on the machine. Each subnode will list the pins it needs, and how they should be configured, with regard to muxer @@ -88,14 +88,14 @@ patternProperties: properties: pinmux: description: - integer array, represents gpio pin number and mux setting. + Integer array, represents gpio pin number and mux setting. Supported pin number and mux varies for different SoCs, and are defined as macros in -pinfunc.h directly. bias-disable: true bias-pull-up: - description: | + description: Besides generic pinconfig options, it can be used as the pull up settings for 2 pull resistors, R0 and R1. User can configure those special pins. Some macros have been defined for this usage, such @@ -117,7 +117,7 @@ patternProperties: input-schmitt-disable: true drive-strength: - description: | + description: Can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See dt-bindings/pinctrl/mt65xx.h for valid arguments. diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml index c2fea29fa02f..1d038f6f8971 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml @@ -11,8 +11,8 @@ maintainers: - Sean Wang description: - The MediaTek pin controller on MT6779 is used to control pin - functions, pull up/down resistance and drive strength options. + The MediaTek pin controller on MT6779 is used to control pin functions, pull + up/down resistance and drive strength options. properties: compatible: @@ -29,22 +29,22 @@ properties: "#gpio-cells": const: 2 - description: | - Number of cells in GPIO specifier. Since the generic GPIO - binding is used, the amount of cells must be specified as 2. See the below - mentioned gpio binding representation for description of particular cells. + description: + Number of cells in GPIO specifier. Since the generic GPIO binding is used, + the amount of cells must be specified as 2. See the below mentioned gpio + binding representation for description of particular cells. gpio-ranges: minItems: 1 maxItems: 5 - description: | + description: GPIO valid number range. interrupt-controller: true interrupts: maxItems: 1 - description: | + description: Specifies the summary IRQ. "#interrupt-cells": @@ -118,19 +118,20 @@ patternProperties: patternProperties: '-pins*$': type: object - description: | + description: A pinctrl node should contain at least one subnodes representing the pinctrl groups available on the machine. Each subnode will list the pins it needs, and how they should be configured, with regard to muxer - configuration, pullups, drive strength, input enable/disable and input schmitt. + configuration, pullups, drive strength, input enable/disable and input + schmitt. $ref: "/schemas/pinctrl/pincfg-node.yaml" properties: pinmux: description: - integer array, represents gpio pin number and mux setting. - Supported pin number and mux varies for different SoCs, and are defined - as macros in boot/dts/-pinfunc.h directly. + Integer array, represents gpio pin number and mux setting. + Supported pin number and mux varies for different SoCs, and are + defined as macros in boot/dts/-pinfunc.h directly. bias-disable: true @@ -159,7 +160,8 @@ patternProperties: mediatek,pull-up-adv: description: | Pull up setings for 2 pull resistors, R0 and R1. User can - configure those special pins. Valid arguments are described as below: + configure those special pins. Valid arguments are described as + below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. @@ -170,7 +172,8 @@ patternProperties: mediatek,pull-down-adv: description: | Pull down settings for 2 pull resistors, R0 and R1. User can - configure those special pins. Valid arguments are described as below: + configure those special pins. Valid arguments are described as + below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6795-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6795-pinctrl.yaml index a78df32e6c39..c3bf98749fa4 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6795-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6795-pinctrl.yaml @@ -10,7 +10,7 @@ maintainers: - AngeloGioacchino Del Regno - Sean Wang -description: | +description: The MediaTek's MT6795 Pin controller is used to control SoC pins. properties: @@ -20,10 +20,10 @@ properties: gpio-controller: true '#gpio-cells': - description: | + description: Number of cells in GPIO specifier. Since the generic GPIO binding is used, - the amount of cells must be specified as 2. See the below - mentioned gpio binding representation for description of particular cells. + the amount of cells must be specified as 2. See the below mentioned gpio + binding representation for description of particular cells. const: 2 gpio-ranges: @@ -32,7 +32,7 @@ properties: reg: description: - Physical address base for gpio base and eint registers. + Physical address base for GPIO base and eint registers. minItems: 2 reg-names: @@ -65,8 +65,8 @@ patternProperties: A pinctrl node should contain at least one subnodes representing the pinctrl groups available on the machine. Each subnode will list the pins it needs, and how they should be configured, with regard to muxer - configuration, pullups, drive strength, input enable/disable and - input schmitt. + configuration, pullups, drive strength, input enable/disable and input + schmitt. An example of using macro: pincontroller { /* GPIO0 set as multifunction GPIO0 */ @@ -86,11 +86,10 @@ patternProperties: properties: pinmux: - description: | + description: Integer array, represents gpio pin number and mux setting. Supported pin number and mux varies for different SoCs, and are - defined as macros in dt-bindings/pinctrl/-pinfunc.h - directly. + defined as macros in dt-bindings/pinctrl/-pinfunc.h directly. drive-strength: enum: [2, 4, 6, 8, 10, 12, 14, 16] @@ -100,20 +99,20 @@ patternProperties: - type: boolean - enum: [100, 101, 102, 103] description: mt6795 pull down PUPD/R0/R1 type define value. - description: | - For normal pull down type, it is not necessary to specify R1R0 - values; When pull down type is PUPD/R0/R1, adding R1R0 defines - will set different resistance values. + description: + For normal pull down type, it is not necessary to specify R1R0 + values; When pull down type is PUPD/R0/R1, adding R1R0 defines + will set different resistance values. bias-pull-up: oneOf: - type: boolean - enum: [100, 101, 102, 103] description: mt6795 pull up PUPD/R0/R1 type define value. - description: | - For normal pull up type, it is not necessary to specify R1R0 - values; When pull up type is PUPD/R0/R1, adding R1R0 defines - will set different resistance values. + description: + For normal pull up type, it is not necessary to specify R1R0 + values; When pull up type is PUPD/R0/R1, adding R1R0 defines will + set different resistance values. bias-disable: true @@ -132,7 +131,8 @@ patternProperties: mediatek,pull-up-adv: description: | Pull up setings for 2 pull resistors, R0 and R1. User can - configure those special pins. Valid arguments are described as below: + configure those special pins. Valid arguments are described as + below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. @@ -143,7 +143,8 @@ patternProperties: mediatek,pull-down-adv: description: | Pull down settings for 2 pull resistors, R0 and R1. User can - configure those special pins. Valid arguments are described as below: + configure those special pins. Valid arguments are described as + below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7620-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7620-pinctrl.yaml index 0dcdc3788e66..808dd8bd276f 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7620-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7620-pinctrl.yaml @@ -10,7 +10,7 @@ maintainers: - Arınç ÜNAL - Sergio Paracuellos -description: +description: | MediaTek MT7620 pin controller for MT7620, MT7628 and MT7688 SoCs. The pin controller can only set the muxing of pin groups. Muxing individual pins is not supported. There is no pinconf support. diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7621-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7621-pinctrl.yaml index 32506c538459..e568b9c13727 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7621-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7621-pinctrl.yaml @@ -10,7 +10,7 @@ maintainers: - Arınç ÜNAL - Sergio Paracuellos -description: +description: | MediaTek MT7621 pin controller for MT7621 SoC. The pin controller can only set the muxing of pin groups. Muxing individual pins is not supported. There is no pinconf support. diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml index 3531b63ca4bf..38dc41c735eb 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml @@ -9,7 +9,7 @@ title: MediaTek MT7622 Pin Controller maintainers: - Sean Wang -description: |+ +description: The MediaTek's MT7622 Pin controller is used to control SoC pins. properties: @@ -29,10 +29,10 @@ properties: "#gpio-cells": const: 2 - description: | - Number of cells in GPIO specifier. Since the generic GPIO - binding is used, the amount of cells must be specified as 2. See the below - mentioned gpio binding representation for description of particular cells. + description: + Number of cells in GPIO specifier. Since the generic GPIO binding is used, + the amount of cells must be specified as 2. See the below mentioned gpio + binding representation for description of particular cells. interrupt-controller: true @@ -68,18 +68,18 @@ patternProperties: '^mux(-|$)': type: object additionalProperties: false - description: | + description: pinmux configuration nodes. $ref: "/schemas/pinctrl/pinmux-node.yaml" properties: function: - description: | + description: A string containing the name of the function to mux to the group. enum: [emmc, eth, i2c, i2s, ir, led, flash, pcie, pmic, pwm, sd, spi, tdm, uart, watchdog, wifi] groups: - description: | + description: An array of strings. Each string contains the name of a group. drive-strength: @@ -247,18 +247,18 @@ patternProperties: '^conf(-|$)': type: object additionalProperties: false - description: | + description: pinconf configuration nodes. $ref: "/schemas/pinctrl/pincfg-node.yaml" properties: groups: - description: | + description: An array of strings. Each string contains the name of a group. Valid values are the same as the pinmux node. pins: - description: | + description: An array of strings. Each string contains the name of a pin. enum: [GPIO_A, I2S1_IN, I2S1_OUT, I2S_BCLK, I2S_WS, I2S_MCLK, TXD0, RXD0, SPI_WP, SPI_HOLD, SPI_CLK, SPI_MOSI, SPI_MISO, SPI_CS, @@ -315,14 +315,14 @@ patternProperties: enum: [0, 1] mediatek,tdsel: - description: | + description: An integer describing the steps for output level shifter duty cycle when asserted (high pulse width adjustment). Valid arguments are from 0 to 15. $ref: /schemas/types.yaml#/definitions/uint32 mediatek,rdsel: - description: | + description: An integer describing the steps for input level shifter duty cycle when asserted (high pulse width adjustment). Valid arguments are from 0 to 63. diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7981-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7981-pinctrl.yaml index c3373290a8a1..10717cee9058 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7981-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7981-pinctrl.yaml @@ -37,7 +37,7 @@ properties: "#gpio-cells": const: 2 - description: > + description: Number of cells in GPIO specifier. Since the generic GPIO binding is used, the amount of cells must be specified as 2. See the below mentioned gpio binding representation for description of particular cells. @@ -111,7 +111,9 @@ patternProperties: "watchdog1" "watchdog" 13 "udi" "udi" 9, 10, 11, 12, 13 "drv_vbus" "usb" 14 - "emmc_45" "flash" 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25 + "emmc_45" "flash" 15, 16, 17, 18, 19, 20, 21, 22, 23, + 24, 25 + "snfi" "flash" 16, 17, 18, 19, 20, 21 "spi0" "spi" 16, 17, 18, 19 "spi0_wp_hold" "spi" 20, 21 @@ -148,7 +150,7 @@ patternProperties: "wf5g_led0" "led" 31 "wf5g_led1" "led" 35 "mt7531_int" "eth" 38 - "ant_sel" "ant" 14, 15, 16, 17, 18, 19, 20, 21, 22 + "ant_sel" "ant" 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 34, 35 $ref: /schemas/pinctrl/pinmux-node.yaml @@ -256,7 +258,8 @@ patternProperties: then: properties: groups: - enum: [gbe_led0, gbe_led1, wf2g_led0, wf2g_led1, wf5g_led0, wf5g_led1] + enum: [gbe_led0, gbe_led1, wf2g_led0, wf2g_led1, wf5g_led0, + wf5g_led1] - if: properties: function: @@ -275,7 +278,8 @@ patternProperties: properties: groups: items: - enum: [spi1_0, spi0, spi0_wp_hold, spi1_1, spi2, spi2_wp_hold] + enum: [spi1_0, spi0, spi0_wp_hold, spi1_1, spi2, + spi2_wp_hold] maxItems: 4 - if: properties: @@ -332,13 +336,14 @@ patternProperties: JTAG_JTDO, JTAG_JTDI, JTAG_JTMS, JTAG_JTCLK, JTAG_JTRST_N, WO_JTAG_JTDO, WO_JTAG_JTDI, WO_JTAG_JTMS, WO_JTAG_JTCLK, WO_JTAG_JTRST_N, USB_VBUS, PWM0, SPI0_CLK, SPI0_MOSI, - SPI0_MISO, SPI0_CS, SPI0_HOLD, SPI0_WP, SPI1_CLK, SPI1_MOSI, - SPI1_MISO, SPI1_CS, SPI2_CLK, SPI2_MOSI, SPI2_MISO, SPI2_CS, - SPI2_HOLD, SPI2_WP, UART0_RXD, UART0_TXD, PCIE_CLK_REQ, - PCIE_WAKE_N, SMI_MDC, SMI_MDIO, GBE_INT, GBE_RESET, - WF_DIG_RESETB, WF_CBA_RESETB, WF_XO_REQ, WF_TOP_CLK, - WF_TOP_DATA, WF_HB1, WF_HB2, WF_HB3, WF_HB4, WF_HB0, - WF_HB0_B, WF_HB5, WF_HB6, WF_HB7, WF_HB8, WF_HB9, WF_HB10] + SPI0_MISO, SPI0_CS, SPI0_HOLD, SPI0_WP, SPI1_CLK, + SPI1_MOSI, SPI1_MISO, SPI1_CS, SPI2_CLK, SPI2_MOSI, + SPI2_MISO, SPI2_CS, SPI2_HOLD, SPI2_WP, UART0_RXD, + UART0_TXD, PCIE_CLK_REQ, PCIE_WAKE_N, SMI_MDC, SMI_MDIO, + GBE_INT, GBE_RESET, WF_DIG_RESETB, WF_CBA_RESETB, + WF_XO_REQ, WF_TOP_CLK, WF_TOP_DATA, WF_HB1, WF_HB2, WF_HB3, + WF_HB4, WF_HB0, WF_HB0_B, WF_HB5, WF_HB6, WF_HB7, WF_HB8, + WF_HB9, WF_HB10] maxItems: 57 bias-disable: true @@ -348,7 +353,7 @@ patternProperties: - type: boolean description: normal pull up. - enum: [100, 101, 102, 103] - description: > + description: PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0 defines in dt-bindings/pinctrl/mt65xx.h. @@ -357,7 +362,7 @@ patternProperties: - type: boolean description: normal pull down. - enum: [100, 101, 102, 103] - description: > + description: PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0 defines in dt-bindings/pinctrl/mt65xx.h. diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml index 71033831d03d..7157500a7f81 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml @@ -9,7 +9,7 @@ title: MediaTek MT7986 Pin Controller maintainers: - Sean Wang -description: |+ +description: The MediaTek's MT7986 Pin controller is used to control SoC pins. properties: @@ -37,15 +37,15 @@ properties: "#gpio-cells": const: 2 - description: | - Number of cells in GPIO specifier. Since the generic GPIO - binding is used, the amount of cells must be specified as 2. See the below - mentioned gpio binding representation for description of particular cells. + description: + Number of cells in GPIO specifier. Since the generic GPIO binding is used, + the amount of cells must be specified as 2. See the below mentioned gpio + binding representation for description of particular cells. gpio-ranges: minItems: 1 maxItems: 5 - description: | + description: GPIO valid number range. interrupt-controller: true @@ -81,7 +81,7 @@ patternProperties: The following table shows the effective values of "group", "function" properties and chip pinout pins - groups function pins (in pin#) + groups function pins (in pin#) --------------------------------------------------------------------- "watchdog" "watchdog" 0 "wifi_led" "led" 1, 2 @@ -97,8 +97,9 @@ patternProperties: "pwm1_0" "pwm" 22, "snfi" "flash" 23, 24, 25, 26, 27, 28 "spi1_2" "spi" 29, 30, 31, 32 - "emmc_45" "emmc" 22, 23, 24, 25, 26, 27, 28, 29, 30, - 31, 32 + "emmc_45" "emmc" 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, + 32 + "spi1_1" "spi" 23, 24, 25, 26 "uart1_2_rx_tx" "uart" 29, 30 "uart1_2_cts_rts" "uart" 31, 32 @@ -115,8 +116,9 @@ patternProperties: "pcie_pereset" "pcie" 41 "uart1" "uart" 42, 43, 44, 45 "uart2" "uart" 46, 47, 48, 49 - "emmc_51" "emmc" 50, 51, 52, 53, 54, 55, 56, 57, 57, - 59, 60, 61 + "emmc_51" "emmc" 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, + 60, 61 + "pcm" "audio" 62, 63, 64, 65 "i2s" "audio" 62, 63, 64, 65 "switch_int" "eth" 66 @@ -129,18 +131,17 @@ patternProperties: $ref: "/schemas/pinctrl/pinmux-node.yaml" properties: function: - description: | + description: A string containing the name of the function to mux to the group. There is no "audio", "pcie" functions on mt7986b, you can only use those functions on mt7986a. enum: [audio, emmc, eth, i2c, led, flash, pcie, pwm, spi, uart, watchdog, wifi] groups: - description: | + description: An array of strings. Each string contains the name of a group. - There is no "pcie_pereset", "uart1", "uart2" "emmc_51", "pcm", - and "i2s" groups on mt7986b, you can only use those groups on - mt7986a. + There is no "pcie_pereset", "uart1", "uart2" "emmc_51", "pcm", and + "i2s" groups on mt7986b, you can only use those groups on mt7986a. required: - function - groups @@ -258,29 +259,30 @@ patternProperties: '.*conf.*': type: object additionalProperties: false - description: | + description: pinconf configuration nodes. $ref: "/schemas/pinctrl/pincfg-node.yaml" properties: pins: - description: | - An array of strings. Each string contains the name of a pin. - There is no PIN 41 to PIN 65 above on mt7686b, you can only use - those pins on mt7986a. + description: + An array of strings. Each string contains the name of a pin. There + is no PIN 41 to PIN 65 above on mt7686b, you can only use those + pins on mt7986a. items: enum: [SYS_WATCHDOG, WF2G_LED, WF5G_LED, I2C_SCL, I2C_SDA, GPIO_0, GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5, GPIO_6, GPIO_7, - GPIO_8, GPIO_9, GPIO_10, GPIO_11, GPIO_12, GPIO_13, GPIO_14, - GPIO_15, PWM0, PWM1, SPI0_CLK, SPI0_MOSI, SPI0_MISO, SPI0_CS, - SPI0_HOLD, SPI0_WP, SPI1_CLK, SPI1_MOSI, SPI1_MISO, SPI1_CS, - SPI2_CLK, SPI2_MOSI, SPI2_MISO, SPI2_CS, SPI2_HOLD, SPI2_WP, - UART0_RXD, UART0_TXD, PCIE_PERESET_N, UART1_RXD, UART1_TXD, - UART1_CTS, UART1_RTS, UART2_RXD, UART2_TXD, UART2_CTS, - UART2_RTS, EMMC_DATA_0, EMMC_DATA_1, EMMC_DATA_2, - EMMC_DATA_3, EMMC_DATA_4, EMMC_DATA_5, EMMC_DATA_6, - EMMC_DATA_7, EMMC_CMD, EMMC_CK, EMMC_DSL, EMMC_RSTB, PCM_DTX, - PCM_DRX, PCM_CLK, PCM_FS, MT7531_INT, SMI_MDC, SMI_MDIO, + GPIO_8, GPIO_9, GPIO_10, GPIO_11, GPIO_12, GPIO_13, + GPIO_14, GPIO_15, PWM0, PWM1, SPI0_CLK, SPI0_MOSI, + SPI0_MISO, SPI0_CS, SPI0_HOLD, SPI0_WP, SPI1_CLK, + SPI1_MOSI, SPI1_MISO, SPI1_CS, SPI2_CLK, SPI2_MOSI, + SPI2_MISO, SPI2_CS, SPI2_HOLD, SPI2_WP, UART0_RXD, + UART0_TXD, PCIE_PERESET_N, UART1_RXD, UART1_TXD, UART1_CTS, + UART1_RTS, UART2_RXD, UART2_TXD, UART2_CTS, UART2_RTS, + EMMC_DATA_0, EMMC_DATA_1, EMMC_DATA_2, EMMC_DATA_3, + EMMC_DATA_4, EMMC_DATA_5, EMMC_DATA_6, EMMC_DATA_7, + EMMC_CMD, EMMC_CK, EMMC_DSL, EMMC_RSTB, PCM_DTX, PCM_DRX, + PCM_CLK, PCM_FS, MT7531_INT, SMI_MDC, SMI_MDIO, WF0_DIG_RESETB, WF0_CBA_RESETB, WF0_XO_REQ, WF0_TOP_CLK, WF0_TOP_DATA, WF0_HB1, WF0_HB2, WF0_HB3, WF0_HB4, WF0_HB0, WF0_HB0_B, WF0_HB5, WF0_HB6, WF0_HB7, WF0_HB8, WF0_HB9, @@ -297,7 +299,7 @@ patternProperties: - type: boolean description: normal pull up. - enum: [100, 101, 102, 103] - description: | + description: PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0 defines in dt-bindings/pinctrl/mt65xx.h. @@ -306,7 +308,7 @@ patternProperties: - type: boolean description: normal pull down. - enum: [100, 101, 102, 103] - description: | + description: PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0 defines in dt-bindings/pinctrl/mt65xx.h. diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml index 3e34b03e11fc..372a3aefa937 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml @@ -9,7 +9,7 @@ title: MediaTek MT8183 Pin Controller maintainers: - Sean Wang -description: |+ +description: The MediaTek's MT8183 Pin controller is used to control SoC pins. properties: @@ -37,15 +37,15 @@ properties: "#gpio-cells": const: 2 - description: | - Number of cells in GPIO specifier. Since the generic GPIO - binding is used, the amount of cells must be specified as 2. See the below - mentioned gpio binding representation for description of particular cells. + description: + Number of cells in GPIO specifier. Since the generic GPIO binding is used, + the amount of cells must be specified as 2. See the below mentioned gpio + binding representation for description of particular cells. gpio-ranges: minItems: 1 maxItems: 5 - description: | + description: GPIO valid number range. interrupt-controller: true @@ -74,7 +74,7 @@ patternProperties: '^pins': type: object additionalProperties: false - description: | + description: A pinctrl node should contain at least one subnodes representing the pinctrl groups available on the machine. Each subnode will list the pins it needs, and how they should be configured, with regard to muxer @@ -85,7 +85,7 @@ patternProperties: properties: pinmux: description: - integer array, represents gpio pin number and mux setting. + Integer array, represents gpio pin number and mux setting. Supported pin number and mux varies for different SoCs, and are defined as macros in -pinfunc.h directly. @@ -139,7 +139,8 @@ patternProperties: mediatek,pull-up-adv: description: | Pull up setings for 2 pull resistors, R0 and R1. User can - configure those special pins. Valid arguments are described as below: + configure those special pins. Valid arguments are described as + below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. @@ -150,7 +151,8 @@ patternProperties: mediatek,pull-down-adv: description: | Pull down settings for 2 pull resistors, R0 and R1. User can - configure those special pins. Valid arguments are described as below: + configure those special pins. Valid arguments are described as + below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. @@ -159,14 +161,14 @@ patternProperties: enum: [0, 1, 2, 3] mediatek,tdsel: - description: | + description: An integer describing the steps for output level shifter duty cycle when asserted (high pulse width adjustment). Valid arguments are from 0 to 15. $ref: /schemas/types.yaml#/definitions/uint32 mediatek,rdsel: - description: | + description: An integer describing the steps for input level shifter duty cycle when asserted (high pulse width adjustment). Valid arguments are from 0 to 63. diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8186-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8186-pinctrl.yaml index a0519acc92fe..eb6a5cdecc6c 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8186-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8186-pinctrl.yaml @@ -9,7 +9,7 @@ title: MediaTek MT8186 Pin Controller maintainers: - Sean Wang -description: | +description: The MediaTek's MT8186 Pin controller is used to control SoC pins. properties: @@ -19,10 +19,10 @@ properties: gpio-controller: true '#gpio-cells': - description: | + description: Number of cells in GPIO specifier. Since the generic GPIO binding is used, - the amount of cells must be specified as 2. See the below - mentioned gpio binding representation for description of particular cells. + the amount of cells must be specified as 2. See the below mentioned gpio + binding representation for description of particular cells. const: 2 gpio-ranges: @@ -31,14 +31,14 @@ properties: gpio-line-names: true reg: - description: | - Physical address base for gpio base registers. There are 8 different GPIO + description: + Physical address base for GPIO base registers. There are 8 different GPIO physical address base in mt8186. maxItems: 8 reg-names: - description: | - Gpio base register names. + description: + GPIO base register names. items: - const: iocfg0 - const: iocfg_lt @@ -60,9 +60,9 @@ properties: mediatek,rsel-resistance-in-si-unit: type: boolean - description: | - Identifying i2c pins pull up/down type which is RSEL. It can support - RSEL define or si unit value(ohm) to set different resistance. + description: + Identifying i2c pins pull up/down type which is RSEL. It can support RSEL + define or si unit value(ohm) to set different resistance. # PIN CONFIGURATION NODES patternProperties: @@ -77,8 +77,8 @@ patternProperties: A pinctrl node should contain at least one subnodes representing the pinctrl groups available on the machine. Each subnode will list the pins it needs, and how they should be configured, with regard to muxer - configuration, pullups, drive strength, input enable/disable and - input schmitt. + configuration, pullups, drive strength, input enable/disable and input + schmitt. An example of using macro: pincontroller { /* GPIO0 set as multifunction GPIO0 */ @@ -98,11 +98,10 @@ patternProperties: properties: pinmux: - description: | + description: Integer array, represents gpio pin number and mux setting. Supported pin number and mux varies for different SoCs, and are - defined as macros in dt-bindings/pinctrl/-pinfunc.h - directly. + defined as macros in dt-bindings/pinctrl/-pinfunc.h directly. drive-strength: enum: [2, 4, 6, 8, 10, 12, 14, 16] @@ -129,10 +128,10 @@ patternProperties: For pull down type is RSEL, it can add RSEL define & resistance value(ohm) to set different resistance by identifying property "mediatek,rsel-resistance-in-si-unit". - It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" - & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" - define in mt8186. It can also support resistance value(ohm) - "75000" & "5000" in mt8186. + It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" & + "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" define in + mt8186. It can also support resistance value(ohm) "75000" & "5000" + in mt8186. An example of using RSEL define: pincontroller { i2c0_pin { @@ -174,10 +173,10 @@ patternProperties: For pull up type is RSEL, it can add RSEL define & resistance value(ohm) to set different resistance by identifying property "mediatek,rsel-resistance-in-si-unit". - It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" - & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" - define in mt8186. It can also support resistance value(ohm) - "1000" & "5000" & "10000" & "75000" in mt8186. + It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" & + "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" define in + mt8186. It can also support resistance value(ohm) "1000" & "5000" + & "10000" & "75000" in mt8186. An example of using si unit resistance value(ohm): &pio { mediatek,rsel-resistance-in-si-unit; diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml index 7e750f1e643d..51b3d1247614 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8188-pinctrl.yaml @@ -9,7 +9,7 @@ title: MediaTek MT8188 Pin Controller maintainers: - Hui Liu -description: | +description: The MediaTek's MT8188 Pin controller is used to control SoC pins. properties: @@ -19,10 +19,10 @@ properties: gpio-controller: true '#gpio-cells': - description: | - Number of cells in GPIO specifier, should be two. The first cell - is the pin number, the second cell is used to specify optional - parameters which are defined in . + description: + Number of cells in GPIO specifier, should be two. The first cell is the + pin number, the second cell is used to specify optional parameters which + are defined in . const: 2 gpio-ranges: @@ -59,10 +59,11 @@ properties: mediatek,rsel-resistance-in-si-unit: type: boolean - description: | - We provide two methods to select the resistance for I2C when pull up or pull down. - The first is by RSEL definition value, another one is by resistance value(ohm). - This flag is used to identify if the method is resistance(si unit) value. + description: + We provide two methods to select the resistance for I2C when pull up or + pull down. The first is by RSEL definition value, another one is by + resistance value(ohm). This flag is used to identify if the method is + resistance(si unit) value. # PIN CONFIGURATION NODES patternProperties: @@ -75,16 +76,16 @@ patternProperties: type: object $ref: "/schemas/pinctrl/pincfg-node.yaml" additionalProperties: false - description: | + description: A pinctrl node should contain at least one subnode representing the pinctrl groups available on the machine. Each subnode will list the pins it needs, and how they should be configured, with regard to muxer - configuration, pullups, drive strength, input enable/disable and - input schmitt. + configuration, pullups, drive strength, input enable/disable and input + schmitt. properties: pinmux: - description: | + description: Integer array, represents gpio pin number and mux setting. Supported pin number and mux varies for different SoCs, and are defined as macros in dt-bindings/pinctrl/mediatek,-pinfunc.h @@ -106,18 +107,21 @@ patternProperties: - enum: [75000, 5000] description: mt8188 pull down RSEL type si unit value(ohm). description: | - For pull down type is normal, it doesn't need add RSEL & R1R0 define - and resistance value. + For pull down type is normal, it doesn't need add RSEL & R1R0 + define and resistance value. For pull down type is PUPD/R0/R1 type, it can add R1R0 define to set different resistance. It can support "MTK_PUPD_SET_R1R0_00" & - "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11" - define in mt8188. - For pull down type is RSEL, it can add RSEL define & resistance value(ohm) - to set different resistance by identifying property "mediatek,rsel-resistance-in-si-unit". - It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" - & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100" - & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" - define in mt8188. It can also support resistance value(ohm) "75000" & "5000" in mt8188. + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & + "MTK_PUPD_SET_R1R0_11" define in mt8188. + For pull down type is RSEL, it can add RSEL define & resistance + value(ohm) to set different resistance by identifying property + "mediatek,rsel-resistance-in-si-unit". It can support + "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" & + "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & + "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" & + "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" define in + mt8188. It can also support resistance value(ohm) "75000" & "5000" + in mt8188. bias-pull-up: oneOf: @@ -131,17 +135,19 @@ patternProperties: description: | For pull up type is normal, it don't need add RSEL & R1R0 define and resistance value. - For pull up type is PUPD/R0/R1 type, it can add R1R0 define to - set different resistance. It can support "MTK_PUPD_SET_R1R0_00" & - "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & "MTK_PUPD_SET_R1R0_11" - define in mt8188. - For pull up type is RSEL, it can add RSEL define & resistance value(ohm) - to set different resistance by identifying property "mediatek,rsel-resistance-in-si-unit". - It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" - & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100" - & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" - define in mt8188. It can also support resistance value(ohm) - "1000" & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" & "75000" in mt8188. + For pull up type is PUPD/R0/R1 type, it can add R1R0 define to set + different resistance. It can support "MTK_PUPD_SET_R1R0_00" & + "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" & + "MTK_PUPD_SET_R1R0_11" define in mt8188. + For pull up type is RSEL, it can add RSEL define & resistance + value(ohm) to set different resistance by identifying property + "mediatek,rsel-resistance-in-si-unit". It can support + "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001" & + "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & + "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" & + "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" define in + mt8188. It can also support resistance value(ohm) "1000" & "1500" + & "2000" & "3000" & "4000" & "5000" & "10000" & "75000" in mt8188. bias-disable: true diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8192-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8192-pinctrl.yaml index 3c3dd142a989..8cca1ce40f25 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8192-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8192-pinctrl.yaml @@ -9,7 +9,7 @@ title: MediaTek MT8192 Pin Controller maintainers: - Sean Wang -description: | +description: The MediaTek's MT8192 Pin controller is used to control SoC pins. properties: @@ -19,27 +19,27 @@ properties: gpio-controller: true '#gpio-cells': - description: | + description: Number of cells in GPIO specifier. Since the generic GPIO binding is used, - the amount of cells must be specified as 2. See the below - mentioned gpio binding representation for description of particular cells. + the amount of cells must be specified as 2. See the below mentioned gpio + binding representation for description of particular cells. const: 2 gpio-ranges: - description: gpio valid number range. + description: GPIO valid number range. maxItems: 1 gpio-line-names: true reg: - description: | - Physical address base for gpio base registers. There are 11 GPIO - physical address base in mt8192. + description: + Physical address base for GPIO base registers. There are 11 GPIO physical + address base in mt8192. maxItems: 11 reg-names: - description: | - Gpio base register names. + description: + GPIO base register names. maxItems: 11 interrupt-controller: true @@ -59,25 +59,26 @@ patternProperties: patternProperties: '^pins': type: object - description: | + description: A pinctrl node should contain at least one subnodes representing the pinctrl groups available on the machine. Each subnode will list the pins it needs, and how they should be configured, with regard to muxer - configuration, pullups, drive strength, input enable/disable and - input schmitt. + configuration, pullups, drive strength, input enable/disable and input + schmitt. $ref: "pinmux-node.yaml" properties: pinmux: - description: | + description: Integer array, represents gpio pin number and mux setting. - Supported pin number and mux varies for different SoCs, and are defined - as macros in dt-bindings/pinctrl/-pinfunc.h directly. + Supported pin number and mux varies for different SoCs, and are + defined as macros in dt-bindings/pinctrl/-pinfunc.h directly. drive-strength: - description: | - It can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA, etc. See - dt-bindings/pinctrl/mt65xx.h. It can only support 2/4/6/8/10/12/14/16mA in mt8192. + description: + It can support some arguments, such as MTK_DRIVE_4mA, + MTK_DRIVE_6mA, etc. See dt-bindings/pinctrl/mt65xx.h. It can only + support 2/4/6/8/10/12/14/16mA in mt8192. enum: [2, 4, 6, 8, 10, 12, 14, 16] drive-strength-microamp: @@ -91,8 +92,8 @@ patternProperties: description: PUPD/R1/R0 pull down type. See MTK_PUPD_SET_R1R0_ defines in dt-bindings/pinctrl/mt65xx.h. - enum: [200, 201, 202, 203] - description: RSEL pull down type. See MTK_PULL_SET_RSEL_ - defines in dt-bindings/pinctrl/mt65xx.h. + description: RSEL pull down type. See MTK_PULL_SET_RSEL_ defines + in dt-bindings/pinctrl/mt65xx.h. bias-pull-up: oneOf: @@ -102,8 +103,8 @@ patternProperties: description: PUPD/R1/R0 pull up type. See MTK_PUPD_SET_R1R0_ defines in dt-bindings/pinctrl/mt65xx.h. - enum: [200, 201, 202, 203] - description: RSEL pull up type. See MTK_PULL_SET_RSEL_ - defines in dt-bindings/pinctrl/mt65xx.h. + description: RSEL pull up type. See MTK_PULL_SET_RSEL_ defines + in dt-bindings/pinctrl/mt65xx.h. bias-disable: true diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8195-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8195-pinctrl.yaml index d4d5357cdd1d..b8ba260d74cd 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8195-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8195-pinctrl.yaml @@ -9,7 +9,7 @@ title: MediaTek MT8195 Pin Controller maintainers: - Sean Wang -description: | +description: The MediaTek's MT8195 Pin controller is used to control SoC pins. properties: @@ -19,27 +19,27 @@ properties: gpio-controller: true '#gpio-cells': - description: | + description: Number of cells in GPIO specifier. Since the generic GPIO binding is used, - the amount of cells must be specified as 2. See the below - mentioned gpio binding representation for description of particular cells. + the amount of cells must be specified as 2. See the below mentioned gpio + binding representation for description of particular cells. const: 2 gpio-ranges: - description: gpio valid number range. + description: GPIO valid number range. maxItems: 1 gpio-line-names: true reg: - description: | - Physical address base for gpio base registers. There are 8 GPIO - physical address base in mt8195. + description: + Physical address base for GPIO base registers. There are 8 GPIO physical + address base in mt8195. maxItems: 8 reg-names: - description: | - Gpio base register names. + description: + GPIO base register names. maxItems: 8 interrupt-controller: true @@ -53,9 +53,9 @@ properties: mediatek,rsel-resistance-in-si-unit: type: boolean - description: | - Identifying i2c pins pull up/down type which is RSEL. It can support - RSEL define or si unit value(ohm) to set different resistance. + description: + Identifying i2c pins pull up/down type which is RSEL. It can support RSEL + define or si unit value(ohm) to set different resistance. # PIN CONFIGURATION NODES patternProperties: @@ -70,8 +70,8 @@ patternProperties: A pinctrl node should contain at least one subnodes representing the pinctrl groups available on the machine. Each subnode will list the pins it needs, and how they should be configured, with regard to muxer - configuration, pullups, drive strength, input enable/disable and - input schmitt. + configuration, pullups, drive strength, input enable/disable and input + schmitt. An example of using macro: pincontroller { /* GPIO0 set as multifunction GPIO0 */ @@ -91,11 +91,10 @@ patternProperties: properties: pinmux: - description: | + description: Integer array, represents gpio pin number and mux setting. Supported pin number and mux varies for different SoCs, and are - defined as macros in dt-bindings/pinctrl/-pinfunc.h - directly. + defined as macros in dt-bindings/pinctrl/-pinfunc.h directly. drive-strength: enum: [2, 4, 6, 8, 10, 12, 14, 16] @@ -174,9 +173,9 @@ patternProperties: & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011" & "MTK_PULL_SET_RSEL_100" & "MTK_PULL_SET_RSEL_101" & "MTK_PULL_SET_RSEL_110" & "MTK_PULL_SET_RSEL_111" - define in mt8195. It can also support resistance value(ohm) - "1000" & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" & - "75000" in mt8195. + define in mt8195. It can also support resistance value(ohm) "1000" + & "1500" & "2000" & "3000" & "4000" & "5000" & "10000" & "75000" + in mt8195. An example of using RSEL define: pincontroller { i2c0-pins { diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml index 42964dfa9fdb..5aa8ba4cb547 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml @@ -10,7 +10,7 @@ maintainers: - Zhiyong Tao - Bernhard Rosenkränzer -description: | +description: The MediaTek's MT8365 Pin controller is used to control SoC pins. properties: @@ -26,17 +26,17 @@ properties: maxItems: 1 minItems: 1 maxItems: 2 - description: | + description: Should be phandles of the syscfg node. gpio-controller: true "#gpio-cells": const: 2 - description: | - Number of cells in GPIO specifier. Since the generic GPIO - binding is used, the amount of cells must be specified as 2. See the below - mentioned gpio binding representation for description of particular cells. + description: + Number of cells in GPIO specifier. Since the generic GPIO binding is used, + the amount of cells must be specified as 2. See the below mentioned gpio + binding representation for description of particular cells. interrupt-controller: true @@ -54,7 +54,7 @@ patternProperties: "pins$": type: object additionalProperties: false - description: | + description: A pinctrl node should contain at least one subnode representing the pinctrl groups available on the machine. Each subnode will list the pins it needs, and how they should be configured, with regard to muxer @@ -65,14 +65,14 @@ patternProperties: properties: pinmux: description: - integer array, represents gpio pin number and mux setting. + Integer array, represents gpio pin number and mux setting. Supported pin number and mux varies for different SoCs, and are defined as macros in -pinfunc.h directly. bias-disable: true bias-pull-up: - description: | + description: Besides generic pinconfig options, it can be used as the pull up settings for 2 pull resistors, R0 and R1. User can configure those special pins. @@ -120,7 +120,8 @@ patternProperties: mediatek,pull-up-adv: description: | Pull up setings for 2 pull resistors, R0 and R1. User can - configure those special pins. Valid arguments are described as below: + configure those special pins. Valid arguments are described as + below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. @@ -131,7 +132,8 @@ patternProperties: mediatek,pull-down-adv: description: | Pull down settings for 2 pull resistors, R0 and R1. User can - configure those special pins. Valid arguments are described as below: + configure those special pins. Valid arguments are described as + below: 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled. 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled. 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled. @@ -140,14 +142,14 @@ patternProperties: enum: [0, 1, 2, 3] mediatek,tdsel: - description: | + description: An integer describing the steps for output level shifter duty cycle when asserted (high pulse width adjustment). Valid arguments are from 0 to 15. $ref: /schemas/types.yaml#/definitions/uint32 mediatek,rdsel: - description: | + description: An integer describing the steps for input level shifter duty cycle when asserted (high pulse width adjustment). Valid arguments are from 0 to 63. diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml index e51667316b2e..43b33dbf115b 100644 --- a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinctrl.yaml @@ -10,7 +10,7 @@ maintainers: - Arınç ÜNAL - Sergio Paracuellos -description: +description: | Ralink RT2880 pin controller for RT2880 SoC. The pin controller can only set the muxing of pin groups. Muxing individual pins is not supported. There is no pinconf support. diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml index 23fb82f9959c..55c6f9826e76 100644 --- a/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt305x-pinctrl.yaml @@ -10,7 +10,7 @@ maintainers: - Arınç ÜNAL - Sergio Paracuellos -description: +description: | Ralink RT305X pin controller for RT3050, RT3052, RT3350, RT3352 and RT5350 SoCs. The pin controller can only set the muxing of pin groups. Muxing individual diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml index adc4f42a175d..8d14e525b25e 100644 --- a/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt3883-pinctrl.yaml @@ -10,7 +10,7 @@ maintainers: - Arınç ÜNAL - Sergio Paracuellos -description: +description: | Ralink RT3883 pin controller for RT3883 SoC. The pin controller can only set the muxing of pin groups. Muxing individual pins is not supported. There is no pinconf support.