@@ -445,6 +445,66 @@ uart3: serial@11005000 {
status = "disabled";
};
+ i2c0: i2c@11007000 {
+ compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
+ reg = <0 0x11007000 0 0x70>, <0 0x11000100 0 0x80>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C0>, <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@11008000 {
+ compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
+ reg = <0 0x11008000 0 0x70>, <0 0x11000180 0 0x80>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C1>, <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@11009000 {
+ compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
+ reg = <0 0x11009000 0 0x70>, <0 0x11000200 0 0x80>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C2>, <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@11010000 {
+ compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
+ reg = <0 0x11010000 0 0x70>, <0 0x11000280 0 0x80>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C3>, <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@11011000 {
+ compatible = "mediatek,mt6795-i2c", "mediatek,mt8173-i2c";
+ reg = <0 0x11011000 0 0x70>, <0 0x11000300 0 0x80>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <16>;
+ clocks = <&pericfg CLK_PERI_I2C4>, <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
mmc0: mmc@11230000 {
compatible = "mediatek,mt6795-mmc";
reg = <0 0x11230000 0 0x1000>;
Add all four I2C controller nodes but keep them in disabled state as usage is board-dependant. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> --- arch/arm64/boot/dts/mediatek/mt6795.dtsi | 60 ++++++++++++++++++++++++ 1 file changed, 60 insertions(+)