diff mbox series

[RFC,v2,net-next,09/14] net: dsa: mt7530: move enabling port 6 to mt7530_setup_port6()

Message ID 20230407134626.47928-10-arinc.unal@arinc9.com (mailing list archive)
State New, archived
Headers show
Series [RFC,v2,net-next,01/14] net: dsa: mt7530: fix comments regarding port 5 and 6 for both switches | expand

Commit Message

Arınç ÜNAL April 7, 2023, 1:46 p.m. UTC 
From: Arınç ÜNAL <arinc.unal@arinc9.com>

Enable port 6 only when port 6 is being used. Read the HWTRAP_XTAL_MASK
value from val now that val is equal to the value of MT7530_MHWTRAP.

Update the comment on mt7530_setup() with a better explanation.

Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
 drivers/net/dsa/mt7530.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 0a6d1c0872be..70a673347cf9 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -404,9 +404,13 @@  static int
 mt7530_setup_port6(struct dsa_switch *ds, phy_interface_t interface)
 {
 	struct mt7530_priv *priv = ds->priv;
-	u32 ncpo1, ssc_delta, trgint, xtal;
+	u32 ncpo1, ssc_delta, trgint, xtal, val;
 
-	xtal = mt7530_read(priv, MT7530_MHWTRAP) & HWTRAP_XTAL_MASK;
+	val = mt7530_read(priv, MT7530_MHWTRAP);
+	val &= ~MHWTRAP_P6_DIS;
+	mt7530_write(priv, MT7530_MHWTRAP, val);
+
+	xtal = val & HWTRAP_XTAL_MASK;
 
 	if (xtal == HWTRAP_XTAL_20MHZ) {
 		dev_err(priv->dev,
@@ -2235,9 +2239,9 @@  mt7530_setup(struct dsa_switch *ds)
 		mt7530_rmw(priv, MT7530_TRGMII_RD(i),
 			   RD_TAP_MASK, RD_TAP(16));
 
-	/* Enable port 6 */
+	/* Enable PHY access and operate in manual mode */
 	val = mt7530_read(priv, MT7530_MHWTRAP);
-	val &= ~MHWTRAP_P6_DIS & ~MHWTRAP_PHY_ACCESS;
+	val &= ~MHWTRAP_PHY_ACCESS;
 	val |= MHWTRAP_MANUAL;
 	mt7530_write(priv, MT7530_MHWTRAP, val);