| Message ID | 20230607061121.6732-2-shawn.sung@mediatek.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add display driver for MT8188 VDOSYS1 | expand |
On Wed, 07 Jun 2023 14:11:16 +0800, Hsiao Chien Sung wrote: > Add device tree documentations for MT8188 VDOSYS1. > > Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com> > --- > .../bindings/arm/mediatek/mediatek,mmsys.yaml | 1 + > .../display/mediatek/mediatek,ethdr.yaml | 5 +- > .../display/mediatek/mediatek,mdp-rdma.yaml | 5 +- > .../display/mediatek/mediatek,merge.yaml | 1 + > .../display/mediatek/mediatek,padding.yaml | 80 +++++++++++++++++++ > 5 files changed, 90 insertions(+), 2 deletions(-) > create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: ./Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml:28:9: [warning] wrong indentation: expected 10 but found 8 (indentation) ./Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml:26:9: [warning] wrong indentation: expected 10 but found 8 (indentation) dtschema/dtc warnings/errors: Documentation/devicetree/bindings/display/mediatek/mediatek,padding.example.dts:19:18: fatal error: dt-bindings/clock/mt8188-clk.h: No such file or directory 19 | #include <dt-bindings/clock/mt8188-clk.h> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. make[1]: *** [scripts/Makefile.lib:419: Documentation/devicetree/bindings/display/mediatek/mediatek,padding.example.dtb] Error 1 make[1]: *** Waiting for unfinished jobs.... make: *** [Makefile:1512: dt_binding_check] Error 2 doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230607061121.6732-2-shawn.sung@mediatek.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On 07/06/2023 08:11, Hsiao Chien Sung wrote: > Add device tree documentations for MT8188 VDOSYS1. It does not look like you tested the bindings, at least after quick look. Please run `make dt_binding_check` (see Documentation/devicetree/bindings/writing-schema.rst for instructions). Maybe you need to update your dtschema and yamllint. > diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml > new file mode 100644 > index 000000000000..8a9e74cbf6dc > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml > @@ -0,0 +1,80 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/mediatek/mediatek,padding.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: MediaTek PADDING > + > +maintainers: > + - Chun-Kuang Hu <chunkuang.hu@kernel.org> > + - Philipp Zabel <p.zabel@pengutronix.de> > + > +description: > + MediaTek PADDING provides ability to VDOSYS1 to fill pixels to > + width and height of a layer with a specified color. > + Since MIXER in VDOSYS1 requires the width of a layer to be 2-pixel-align, or > + 4-pixel-align when ETHDR is enabled, we need PADDING to deal with odd width. > + Please notice that even if the PADDING is in bypass mode, > + settings in the registers must be cleared to 0, otherwise > + undeinfed behaviors could happen. Typo, undefined > + > +required: > + - compatible > + - reg > + - power-domains > + - clocks > + - mediatek,gce-client-reg > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/clock/mt8188-clk.h> > + #include <dt-bindings/power/mt8188-power.h> > + #include <dt-bindings/gce/mt8188-gce.h> > + #include <dt-bindings/memory/mt8188-memory-port.h> > + > + soc { > + #address-cells = <2>; > + #size-cells = <2>; > + > + vdo1_padding0: vdo1_padding0@1c11d000 { No underscores in node names. Node names should be generic. See also explanation and list of examples in DT specification: https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation > + compatible = "mediatek,mt8188-vdo1-padding"; > + reg = <0 0x1c11d000 0 0x1000>; > + clocks = <&vdosys1 CLK_VDO1_PADDING0>; > + power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>; > + mediatek,gce-client-reg = > + <&gce0 SUBSYS_1c11XXXX 0xd000 0x1000>; Wrong wrapping. It's one line. Properties should not be wrapped after '='. Best regards, Krzysztof
Hi Krzysztof, Sorry, I missed this step in my SOP. Will follow the instruction below to check again, thank you for the information. Best regards, Hsiao Chien Sung On Wed, 2023-06-07 at 09:26 +0200, Krzysztof Kozlowski wrote: > > External email : Please do not click links or open attachments until > you have verified the sender or the content. > > On 07/06/2023 08:11, Hsiao Chien Sung wrote: > > Add device tree documentations for MT8188 VDOSYS1. > > It does not look like you tested the bindings, at least after quick > look. Please run `make dt_binding_check` (see > Documentation/devicetree/bindings/writing-schema.rst for > instructions). > Maybe you need to update your dtschema and yamllint. > > > diff --git > a/Documentation/devicetree/bindings/display/mediatek/mediatek,padding > .yaml > b/Documentation/devicetree/bindings/display/mediatek/mediatek,padding > .yaml > > new file mode 100644 > > index 000000000000..8a9e74cbf6dc > > --- /dev/null > > +++ > b/Documentation/devicetree/bindings/display/mediatek/mediatek,padding > .yaml > > @@ -0,0 +1,80 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: > http://devicetree.org/schemas/display/mediatek/mediatek,padding.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: MediaTek PADDING > > + > > +maintainers: > > + - Chun-Kuang Hu <chunkuang.hu@kernel.org> > > + - Philipp Zabel <p.zabel@pengutronix.de> > > + > > +description: > > + MediaTek PADDING provides ability to VDOSYS1 to fill pixels to > > + width and height of a layer with a specified color. > > + Since MIXER in VDOSYS1 requires the width of a layer to be 2- > pixel-align, or > > + 4-pixel-align when ETHDR is enabled, we need PADDING to deal > with odd width. > > + Please notice that even if the PADDING is in bypass mode, > > + settings in the registers must be cleared to 0, otherwise > > + undeinfed behaviors could happen. > > Typo, undefined > > > + > > > > > +required: > > + - compatible > > + - reg > > + - power-domains > > + - clocks > > + - mediatek,gce-client-reg > > + > > +additionalProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/interrupt-controller/arm-gic.h> > > + #include <dt-bindings/clock/mt8188-clk.h> > > + #include <dt-bindings/power/mt8188-power.h> > > + #include <dt-bindings/gce/mt8188-gce.h> > > + #include <dt-bindings/memory/mt8188-memory-port.h> > > + > > + soc { > > + #address-cells = <2>; > > + #size-cells = <2>; > > + > > + vdo1_padding0: vdo1_padding0@1c11d000 { > > No underscores in node names. > > Node names should be generic. See also explanation and list of > examples > in DT specification: > https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation > > > + compatible = "mediatek,mt8188-vdo1-padding"; > > + reg = <0 0x1c11d000 0 0x1000>; > > + clocks = <&vdosys1 CLK_VDO1_PADDING0>; > > + power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>; > > + mediatek,gce-client-reg = > > + <&gce0 SUBSYS_1c11XXXX 0xd000 0x1000>; > > Wrong wrapping. It's one line. Properties should not be wrapped after > '='. > > > Best regards, > Krzysztof >
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml index 536f5a5ebd24..642fa2e4736e 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml @@ -32,6 +32,7 @@ properties: - mediatek,mt8183-mmsys - mediatek,mt8186-mmsys - mediatek,mt8188-vdosys0 + - mediatek,mt8188-vdosys1 - mediatek,mt8192-mmsys - mediatek,mt8195-vdosys1 - mediatek,mt8195-vppsys0 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml index 801fa66ae615..e3f740ab0564 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,ethdr.yaml @@ -23,7 +23,10 @@ description: properties: compatible: - const: mediatek,mt8195-disp-ethdr + oneOf: + - enum: + - mediatek,mt8188-disp-ethdr + - mediatek,mt8195-disp-ethdr reg: maxItems: 7 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml index dd12e2ff685c..07c345fa9178 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,mdp-rdma.yaml @@ -21,7 +21,10 @@ description: properties: compatible: - const: mediatek,mt8195-vdo1-rdma + oneOf: + - enum: + - mediatek,mt8188-vdo1-rdma + - mediatek,mt8195-vdo1-rdma reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml index 2f8e2f4dc3b8..600f1b4608f8 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,merge.yaml @@ -23,6 +23,7 @@ properties: oneOf: - enum: - mediatek,mt8173-disp-merge + - mediatek,mt8188-disp-merge - mediatek,mt8195-disp-merge reg: diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml new file mode 100644 index 000000000000..8a9e74cbf6dc --- /dev/null +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/mediatek/mediatek,padding.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek PADDING + +maintainers: + - Chun-Kuang Hu <chunkuang.hu@kernel.org> + - Philipp Zabel <p.zabel@pengutronix.de> + +description: + MediaTek PADDING provides ability to VDOSYS1 to fill pixels to + width and height of a layer with a specified color. + Since MIXER in VDOSYS1 requires the width of a layer to be 2-pixel-align, or + 4-pixel-align when ETHDR is enabled, we need PADDING to deal with odd width. + Please notice that even if the PADDING is in bypass mode, + settings in the registers must be cleared to 0, otherwise + undeinfed behaviors could happen. + +properties: + compatible: + const: mediatek,mt8188-vdo1-padding + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + + clocks: + items: + - description: RDMA Clock + + mediatek,gce-client-reg: + description: + The register of display function block to be set by gce. There are 4 arguments, + such as gce node, subsys id, offset and register size. The subsys id that is + mapping to the register of display function blocks is defined in the gce header + include/dt-bindings/gce/<chip>-gce.h of each chips. + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + items: + - description: phandle of GCE + - description: GCE subsys id + - description: register offset + - description: register size + maxItems: 1 + +required: + - compatible + - reg + - power-domains + - clocks + - mediatek,gce-client-reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8188-clk.h> + #include <dt-bindings/power/mt8188-power.h> + #include <dt-bindings/gce/mt8188-gce.h> + #include <dt-bindings/memory/mt8188-memory-port.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + vdo1_padding0: vdo1_padding0@1c11d000 { + compatible = "mediatek,mt8188-vdo1-padding"; + reg = <0 0x1c11d000 0 0x1000>; + clocks = <&vdosys1 CLK_VDO1_PADDING0>; + power-domains = <&spm MT8188_POWER_DOMAIN_VDOSYS1>; + mediatek,gce-client-reg = + <&gce0 SUBSYS_1c11XXXX 0xd000 0x1000>; + }; + };
Add device tree documentations for MT8188 VDOSYS1. Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com> --- .../bindings/arm/mediatek/mediatek,mmsys.yaml | 1 + .../display/mediatek/mediatek,ethdr.yaml | 5 +- .../display/mediatek/mediatek,mdp-rdma.yaml | 5 +- .../display/mediatek/mediatek,merge.yaml | 1 + .../display/mediatek/mediatek,padding.yaml | 80 +++++++++++++++++++ 5 files changed, 90 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/mediatek/mediatek,padding.yaml -- 2.18.0