diff mbox series

[-next,07/11] mtd: rawnand: mtk: Use helper function devm_clk_get_enabled()

Message ID 20230817024509.3951629-8-lizetao1@huawei.com (mailing list archive)
State New, archived
Headers show
Series mtd: Use devm_clk_get_enabled() to simplify the drivers. | expand

Commit Message

Li Zetao Aug. 17, 2023, 2:45 a.m. UTC
After the commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for
prepared and enabled clocks"), it can replace the pair of functions,
devm_clk_get() and clk_prepare_enable() with a single helper function
devm_clk_get_enabled(). Moreover, the driver will keeps a clock prepared
(or enabled) during the whole lifetime of the driver, it is unnecessary to
unprepare and disable clock explicitly when remove driver or in the error
handling path. The mtk_nfc_enable_clk() is a helper function that enables
the "clk->nfi_clk" and "clk->pad_clk", it can be combined into
devm_clk_get_enabled().

Signed-off-by: Li Zetao <lizetao1@huawei.com>
---
 drivers/mtd/nand/raw/mtk_nand.c | 20 ++++++--------------
 1 file changed, 6 insertions(+), 14 deletions(-)

Comments

Miquel Raynal Aug. 17, 2023, 8:34 a.m. UTC | #1
Hi Li,

lizetao1@huawei.com wrote on Thu, 17 Aug 2023 10:45:05 +0800:

> After the commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for
> prepared and enabled clocks"), it can replace the pair of functions,
> devm_clk_get() and clk_prepare_enable() with a single helper function
> devm_clk_get_enabled(). Moreover, the driver will keeps a clock prepared
> (or enabled) during the whole lifetime of the driver, it is unnecessary to
> unprepare and disable clock explicitly when remove driver or in the error
> handling path. The mtk_nfc_enable_clk() is a helper function that enables
> the "clk->nfi_clk" and "clk->pad_clk", it can be combined into
> devm_clk_get_enabled().
> 
> Signed-off-by: Li Zetao <lizetao1@huawei.com>
> ---
>  drivers/mtd/nand/raw/mtk_nand.c | 20 ++++++--------------
>  1 file changed, 6 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/mtk_nand.c b/drivers/mtd/nand/raw/mtk_nand.c
> index b6eb8cb6b5e9..0d185e650aaf 100644
> --- a/drivers/mtd/nand/raw/mtk_nand.c
> +++ b/drivers/mtd/nand/raw/mtk_nand.c
> @@ -1545,40 +1545,36 @@ static int mtk_nfc_probe(struct platform_device *pdev)
>  		goto release_ecc;
>  	}
>  
> -	nfc->clk.nfi_clk = devm_clk_get(dev, "nfi_clk");
> +	nfc->clk.nfi_clk = devm_clk_get_enabled(dev, "nfi_clk");
>  	if (IS_ERR(nfc->clk.nfi_clk)) {
>  		dev_err(dev, "no clk\n");
>  		ret = PTR_ERR(nfc->clk.nfi_clk);
>  		goto release_ecc;
>  	}
>  
> -	nfc->clk.pad_clk = devm_clk_get(dev, "pad_clk");
> +	nfc->clk.pad_clk = devm_clk_get_enabled(dev, "pad_clk");
>  	if (IS_ERR(nfc->clk.pad_clk)) {
>  		dev_err(dev, "no pad clk\n");
>  		ret = PTR_ERR(nfc->clk.pad_clk);
>  		goto release_ecc;
>  	}
>  
> -	ret = mtk_nfc_enable_clk(dev, &nfc->clk);
> -	if (ret)
> -		goto release_ecc;
> -
>  	irq = platform_get_irq(pdev, 0);
>  	if (irq < 0) {
>  		ret = -EINVAL;
> -		goto clk_disable;
> +		goto release_ecc;
>  	}
>  
>  	ret = devm_request_irq(dev, irq, mtk_nfc_irq, 0x0, "mtk-nand", nfc);
>  	if (ret) {
>  		dev_err(dev, "failed to request nfi irq\n");
> -		goto clk_disable;
> +		goto release_ecc;
>  	}
>  
>  	ret = dma_set_mask(dev, DMA_BIT_MASK(32));
>  	if (ret) {
>  		dev_err(dev, "failed to set dma mask\n");
> -		goto clk_disable;
> +		goto release_ecc;
>  	}
>  
>  	platform_set_drvdata(pdev, nfc);
> @@ -1586,14 +1582,11 @@ static int mtk_nfc_probe(struct platform_device *pdev)
>  	ret = mtk_nfc_nand_chips_init(dev, nfc);
>  	if (ret) {
>  		dev_err(dev, "failed to init nand chips\n");
> -		goto clk_disable;
> +		goto release_ecc;
>  	}
>  
>  	return 0;
>  
> -clk_disable:
> -	mtk_nfc_disable_clk(&nfc->clk);
> -
>  release_ecc:
>  	mtk_ecc_release(nfc->ecc);
>  
> @@ -1618,7 +1611,6 @@ static void mtk_nfc_remove(struct platform_device *pdev)
>  	}
>  
>  	mtk_ecc_release(nfc->ecc);
> -	mtk_nfc_disable_clk(&nfc->clk);

mtk_nfc_disable_clk() now has a single user, which is the suspend
callback. This callback does nothing else than calling
mtk_nfs_disable_clk(). Can you please drop the helper and just move the
two lines in the suspend function?

>  }
>  
>  #ifdef CONFIG_PM_SLEEP


Thanks,
Miquèl
diff mbox series

Patch

diff --git a/drivers/mtd/nand/raw/mtk_nand.c b/drivers/mtd/nand/raw/mtk_nand.c
index b6eb8cb6b5e9..0d185e650aaf 100644
--- a/drivers/mtd/nand/raw/mtk_nand.c
+++ b/drivers/mtd/nand/raw/mtk_nand.c
@@ -1545,40 +1545,36 @@  static int mtk_nfc_probe(struct platform_device *pdev)
 		goto release_ecc;
 	}
 
-	nfc->clk.nfi_clk = devm_clk_get(dev, "nfi_clk");
+	nfc->clk.nfi_clk = devm_clk_get_enabled(dev, "nfi_clk");
 	if (IS_ERR(nfc->clk.nfi_clk)) {
 		dev_err(dev, "no clk\n");
 		ret = PTR_ERR(nfc->clk.nfi_clk);
 		goto release_ecc;
 	}
 
-	nfc->clk.pad_clk = devm_clk_get(dev, "pad_clk");
+	nfc->clk.pad_clk = devm_clk_get_enabled(dev, "pad_clk");
 	if (IS_ERR(nfc->clk.pad_clk)) {
 		dev_err(dev, "no pad clk\n");
 		ret = PTR_ERR(nfc->clk.pad_clk);
 		goto release_ecc;
 	}
 
-	ret = mtk_nfc_enable_clk(dev, &nfc->clk);
-	if (ret)
-		goto release_ecc;
-
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		ret = -EINVAL;
-		goto clk_disable;
+		goto release_ecc;
 	}
 
 	ret = devm_request_irq(dev, irq, mtk_nfc_irq, 0x0, "mtk-nand", nfc);
 	if (ret) {
 		dev_err(dev, "failed to request nfi irq\n");
-		goto clk_disable;
+		goto release_ecc;
 	}
 
 	ret = dma_set_mask(dev, DMA_BIT_MASK(32));
 	if (ret) {
 		dev_err(dev, "failed to set dma mask\n");
-		goto clk_disable;
+		goto release_ecc;
 	}
 
 	platform_set_drvdata(pdev, nfc);
@@ -1586,14 +1582,11 @@  static int mtk_nfc_probe(struct platform_device *pdev)
 	ret = mtk_nfc_nand_chips_init(dev, nfc);
 	if (ret) {
 		dev_err(dev, "failed to init nand chips\n");
-		goto clk_disable;
+		goto release_ecc;
 	}
 
 	return 0;
 
-clk_disable:
-	mtk_nfc_disable_clk(&nfc->clk);
-
 release_ecc:
 	mtk_ecc_release(nfc->ecc);
 
@@ -1618,7 +1611,6 @@  static void mtk_nfc_remove(struct platform_device *pdev)
 	}
 
 	mtk_ecc_release(nfc->ecc);
-	mtk_nfc_disable_clk(&nfc->clk);
 }
 
 #ifdef CONFIG_PM_SLEEP