diff mbox series

[net-next,v2,02/10] dt-bindings: net: dsa: microchip,lan937x: add missing ethernet on example

Message ID 20230916110902.234273-3-arinc.unal@arinc9.com (mailing list archive)
State New, archived
Headers show
Series define and enforce phylink bindings | expand

Commit Message

Arınç ÜNAL Sept. 16, 2023, 11:08 a.m. UTC 
The port@5 node on the example is supposed to be used as a CPU port. Add
the missing ethernet property and remove the label property. Remove the MAC
bindings on the example as they cannot be validated.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../bindings/net/dsa/microchip,lan937x.yaml          | 12 +-----------
 1 file changed, 1 insertion(+), 11 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml
index 8d7e878b84dc..d187034fb31a 100644
--- a/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml
@@ -68,16 +68,6 @@  examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
 
-    macb0 {
-            #address-cells = <1>;
-            #size-cells = <0>;
-
-            fixed-link {
-                    speed = <1000>;
-                    full-duplex;
-            };
-    };
-
     spi {
             #address-cells = <1>;
             #size-cells = <0>;
@@ -134,10 +124,10 @@  examples:
 
                             port@5 {
                                     reg = <5>;
-                                    label = "lan7";
                                     phy-mode = "rgmii";
                                     tx-internal-delay-ps = <2000>;
                                     rx-internal-delay-ps = <2000>;
+                                    ethernet = <&macb1>;
 
                                     fixed-link {
                                             speed = <1000>;